Epson Projector PT EZ590 User Manual
Here you can view all the pages of manual Epson Projector PT EZ590 User Manual. The Epson manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 21
Chapter 1 Preparation — Precautions for use ENGLISH - 21 About Wireless LANs The advantage of a wireless LAN is that information can be exchanged between a PC or other such equipment and an access point using radio waves as long as you are within range for radio transmissions. On the other hand, because the radio waves can travel through obstacles (such as walls) and are available everywhere within a given range, problems of the type listed below may occur if security-related settings are not made....
Page 22
Chapter 1 Preparation — Precautions for use 22 - ENGLISH r LCD panel f The LCD panel is precision-made. Note that in rare cases, pixels of high precision could be missing or always lit. Note that such phenomena do not indicate malfunction. If still images are projected for a long time, a residual image may remain on the LCD panel. Note that the residual image may not disappear . r Optical parts When the operating environment temperature is high or in environments where lots of dust, cigarette...
Page 23
Chapter 1 Preparation — Precautions for use ENGLISH - 23 Accessories Make sure that the following accessories are provided with your projector . Numbers enclosed in < > show the number of accessories. Wireless/wired remote control unit ¢ N2QAYA000119 £ For PT-EZ590 / PT-EW650 / PT-EX620 ¢ N2QAYA000121 £ For PT-EW550 / PT-EX520 ¢ N2QAYA000119 £ For PT-EZ590 / PT-EW650 / PT-EX620 ¢ N2QAYA000121 £ For PT-EW550 / PT-EX520 Power cord (TXFSX01RXQZ) (TXFSX01RWDZ)...
Page 24
Chapter 1 Preparation — Precautions for use 24 - ENGLISH Contents of the supplied CD-ROM The contents of the supplied CD-ROM are as follows. Instruction/list (PDF) Operating Instructions Multi Monitoring & Control Software Operating Instructions Logo Transfer Software Operating Instructions Presenter Light Software Operating Instructions List of Compatible Device Models This is a list of display models (projector or flat panel display) that are compatible with the software contained in the CD-ROM and...
Page 25
Chapter 1 Preparation — About your projector ENGLISH - 25 About your projector Remote control r Bottom r To p r Front For PT-EZ590 / PT-EW650 / PT-EX620 For PT-EW550 / PT-EX520 2 1 3 4 6 5 5 7 18 17 19 8 9 10 12 16 15 21 20 22 23 11 14 13 13 24 25 1 Power button ( v standby/b power on) Sets the projector to the state where the projector is switched off (standby mode) when the switch on the projector is set to and in the projection mode. Also starts projection when the power is switched off...
Page 26
Chapter 1 Preparation — About your projector 26 - ENGLISH Attention f Do not drop the remote control. f Avoid contact with liquids or moisture. f Do not attempt to modify or disassemble the remote control. f Please observe the following contents that are described on the back of the remote control unit (see the right picture). 1. Do not use a new battery together with an old battery. 2. Do not use unspecified batteries. 3. Make sure the polarities (+ and -) are correct when...
Page 27
Chapter 1 Preparation — About your projector ENGLISH - 27 16 Control panel ( x page 27) 17 Air filter cover The air filter unit is inside. 18 Air intake port r Bottom 222018 21 19 r To p Projection direction 19 Lens release button fixing screw hole When you replace the projection lens, you can use if you want to fix the lens release button. 20 Burglar hook port Attaches a burglar prevention cable, etc. 21 Luminance sensor Measures the brightness of the installation environment. When the...
Page 28
Chapter 1 Preparation — About your projector 28 - ENGLISH r Connecting terminals 1 2 34 5 67 8 10 9 11121314 1 terminal Insert the optional wireless module (Model No.: ET-WML100) directly to this terminal when using the wireless LAN function. 2 (, , , , ) terminals This is the terminal to input RGB signals, YC BCR/YPBPR signals, or Y/C signals. 3 terminal This is the terminal to input RGB signals or YC BCR/YPBPR signals. 4 terminal This is the terminal to output analog RGB signals and YC...
Page 29
Chapter 1 Preparation — Preparing the remote control ENGLISH - 29 Preparing the remote control Inserting and removing the batteries ii)i) Fig. 1 Fig. 2 1) Open the cover. (Fig. 1) 2) Insert the batteries and close the cover (insert the m side first). (Fig. 2) f When removing the batteries, perform the steps in reverse order. When using the system with multiple projectors When you use the system with multiple projectors, you can operate all the projectors simultaneously or each projector individually...
Page 30
30 - ENGLISH Chapter 2 Getting Started This chapter describes things you need to do before using the projector \ such as the setup and connections.