Epson Projector PT EZ590 User Manual
Here you can view all the pages of manual Epson Projector PT EZ590 User Manual. The Epson manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 41
![Page 41
Chapter 2 Getting Started — Connecting
ENGLISH - 41
terminal/ terminal pin assignments and signal nam\
es
Outside view
Pin No.Signal name Pin No.Signal name
Even-numbered pins of (2) to (18)
(1)(19)
(2)
(18)
Odd-numbered pins of (1) to (19)
(1) T.M.D.S data 2+ (11)T.M.D.S clock shield
(2) T.M.D.S data 2 shield (12)T.M.D.S clock
-
(3)T.M.D.S data 2-(13) CEC
(4) T.M.D.S data 1+ (14)—
(5) T.M.D.S data 1 shield (15)SCL
(6) T.M.D.S data 1
-(16) SDA
(7) T.M.D.S data 0+ (17)DDC/CEC
GND
(8) T.M.D.S data 0...](http://img.usermanuals.tech/thumb/23/100220/w300_projector_manual_9463_d-40.png "Page 41
Chapter 2 Getting Started — Connecting
ENGLISH - 41
terminal/ terminal pin assignments and signal nam\
es
Outside view
Pin No.Signal name Pin No.Signal name
Even-numbered pins of (2) to (18)
(1)(19)
(2)
(18)
Odd-numbered pins of (1) to (19)
(1) T.M.D.S data 2+ (11)T.M.D.S clock shield
(2) T.M.D.S data 2 shield (12)T.M.D.S clock
-
(3)T.M.D.S data 2-(13) CEC
(4) T.M.D.S data 1+ (14)—
(5) T.M.D.S data 1 shield (15)SCL
(6) T.M.D.S data 1
-(16) SDA
(7) T.M.D.S data 0+ (17)DDC/CEC
GND
(8) T.M.D.S data 0...")
Chapter 2 Getting Started — Connecting ENGLISH - 41 terminal/ terminal pin assignments and signal nam\ es Outside view Pin No.Signal name Pin No.Signal name Even-numbered pins of (2) to (18) (1)(19) (2) (18) Odd-numbered pins of (1) to (19) (1) T.M.D.S data 2+ (11)T.M.D.S clock shield (2) T.M.D.S data 2 shield (12)T.M.D.S clock - (3)T.M.D.S data 2-(13) CEC (4) T.M.D.S data 1+ (14)— (5) T.M.D.S data 1 shield (15)SCL (6) T.M.D.S data 1 -(16) SDA (7) T.M.D.S data 0+ (17)DDC/CEC GND (8) T.M.D.S data 0...
Page 42
Chapter 2 Getting Started — Connecting 42 - ENGLISH Connecting example: Computers Computer Computer Computer Optional wireless module (Model No.: ET-WML100) Control computer Control computer Audio equipment Attention f When connecting the projector to a computer or an external device, use the power cord supplied with each device and commercially available shielded cables. Note f For an HDMI cable, use an HDMI High Speed cable that conforms to HDMI standards. If a cable that does not conform to HDMI...
Page 43
![Page 43
Chapter 2 Getting Started — Connecting
ENGLISH - 43
Example of twisted-pair-
cable transmitter
Computer
Computer cable
(commercially available)
HDMI cable
(commercially available)
Blu-ray disc player
Video deck (TBC built-in)
Control computer
*1
Projector connecting terminals
Hub
*1 The control target will be the projector or the twisted-pair-cable trans\
mitter. The control itself may not be possible depending on the
twisted-paircable transmitter. Check the operating instructions of the device to be...](http://img.usermanuals.tech/thumb/23/100220/w300_projector_manual_9463_d-42.png "Page 43
Chapter 2 Getting Started — Connecting
ENGLISH - 43
Example of twisted-pair-
cable transmitter
Computer
Computer cable
(commercially available)
HDMI cable
(commercially available)
Blu-ray disc player
Video deck (TBC built-in)
Control computer
*1
Projector connecting terminals
Hub
*1 The control target will be the projector or the twisted-pair-cable trans\
mitter. The control itself may not be possible depending on the
twisted-paircable transmitter. Check the operating instructions of the device to be...")
Chapter 2 Getting Started — Connecting ENGLISH - 43 Example of twisted-pair- cable transmitter Computer Computer cable (commercially available) HDMI cable (commercially available) Blu-ray disc player Video deck (TBC built-in) Control computer *1 Projector connecting terminals Hub *1 The control target will be the projector or the twisted-pair-cable trans\ mitter. The control itself may not be possible depending on the twisted-paircable transmitter. Check the operating instructions of the device to be...
Page 44
44 - ENGLISH Chapter 3 Basic Operations This chapter describes basic operations to start with.
Page 45
Chapter 3 Basic Operations — Switching on/off the projector ENGLISH - 45 Switching on/off the projector Connecting the power cord Make sure that the supplied power cord is securely fixed to the projector body to prevent it from being removed easily. Confirm that the switch is on the side before connecting the power cord. Use the power cord matching with the power supply voltage and the shape of the outlet. For details of power cord handling, refer to “Read this first!” ( x page 4). Attaching the power...
Page 46
![Page 46
Chapter 3 Basic Operations — Switching on/off the projector
46 - ENGLISH
Indicator status
Projector status
Green Lit
Projecting.
Blinking The power is still on while the lamp is turned off. The [PROJECTOR SETUP] menu → [ECO MANAGEMENT]
→ [POWER MANAGEMENT] is set to [READY].
*2
The shutter function is in use (shutter: closed).*3
The lamp starts work. The projector will project image after a while.*4
Orange
LitThe projector is preparing to be switched off.
The power is switched off after a while....](http://img.usermanuals.tech/thumb/23/100220/w300_projector_manual_9463_d-45.png "Page 46
Chapter 3 Basic Operations — Switching on/off the projector
46 - ENGLISH
Indicator status
Projector status
Green Lit
Projecting.
Blinking The power is still on while the lamp is turned off. The [PROJECTOR SETUP] menu → [ECO MANAGEMENT]
→ [POWER MANAGEMENT] is set to [READY].
*2
The shutter function is in use (shutter: closed).*3
The lamp starts work. The projector will project image after a while.*4
Orange
LitThe projector is preparing to be switched off.
The power is switched off after a while....")
Chapter 3 Basic Operations — Switching on/off the projector 46 - ENGLISH Indicator status Projector status Green Lit Projecting. Blinking The power is still on while the lamp is turned off. The [PROJECTOR SETUP] menu → [ECO MANAGEMENT] → [POWER MANAGEMENT] is set to [READY]. *2 The shutter function is in use (shutter: closed).*3 The lamp starts work. The projector will project image after a while.*4 Orange LitThe projector is preparing to be switched off. The power is switched off after a while....
Page 47
![Page 47
Chapter 3 Basic Operations — Switching on/off the projector
ENGLISH - 47
When the initial setting screen is displayed
When the projector is switched on for the first time after purchase as well as when [INITIALIZE
ALL] in the
[PROJECTOR SETUP] menu is executed, the focus adjustment screen is displayed after projection starts, then
the [INITIAL SETTING] screen is displayed. Set them in accordance with circumstances.
In other occasions, you can change the settings by menu operations.
If you press the...](http://img.usermanuals.tech/thumb/23/100220/w300_projector_manual_9463_d-46.png "Page 47
Chapter 3 Basic Operations — Switching on/off the projector
ENGLISH - 47
When the initial setting screen is displayed
When the projector is switched on for the first time after purchase as well as when [INITIALIZE
ALL] in the
[PROJECTOR SETUP] menu is executed, the focus adjustment screen is displayed after projection starts, then
the [INITIAL SETTING] screen is displayed. Set them in accordance with circumstances.
In other occasions, you can change the settings by menu operations.
If you press the...")
Chapter 3 Basic Operations — Switching on/off the projector ENGLISH - 47 When the initial setting screen is displayed When the projector is switched on for the first time after purchase as well as when [INITIALIZE ALL] in the [PROJECTOR SETUP] menu is executed, the focus adjustment screen is displayed after projection starts, then the [INITIAL SETTING] screen is displayed. Set them in accordance with circumstances. In other occasions, you can change the settings by menu operations. If you press the...
Page 48
![Page 48
Chapter 3 Basic Operations — Switching on/off the projector
48 - ENGLISH
[SCREEN FORMAT] Set the screen format (aspect ratio) and display position of the image.
After the
initial setting is completed, you can change the settings of each item from the
[DISPLAY OPTION] menu → [SCREEN SETTING]. 86
[SCREEN POSITION] Set the display position of the image. After the initial setting is completed, you
can change the settings of each item from the [DISPLAY OPTION] menu →
[SCREEN SETTING]. 86
[STANDBY MODE]...](http://img.usermanuals.tech/thumb/23/100220/w300_projector_manual_9463_d-47.png "Page 48
Chapter 3 Basic Operations — Switching on/off the projector
48 - ENGLISH
[SCREEN FORMAT] Set the screen format (aspect ratio) and display position of the image.
After the
initial setting is completed, you can change the settings of each item from the
[DISPLAY OPTION] menu → [SCREEN SETTING]. 86
[SCREEN POSITION] Set the display position of the image. After the initial setting is completed, you
can change the settings of each item from the [DISPLAY OPTION] menu →
[SCREEN SETTING]. 86
[STANDBY MODE]...")
Chapter 3 Basic Operations — Switching on/off the projector 48 - ENGLISH [SCREEN FORMAT] Set the screen format (aspect ratio) and display position of the image. After the initial setting is completed, you can change the settings of each item from the [DISPLAY OPTION] menu → [SCREEN SETTING]. 86 [SCREEN POSITION] Set the display position of the image. After the initial setting is completed, you can change the settings of each item from the [DISPLAY OPTION] menu → [SCREEN SETTING]. 86 [STANDBY MODE]...
Page 49
![Page 49
Chapter 3 Basic Operations — Switching on/off the projector
ENGLISH - 49
3)
Press the button.
f Confirm the setting value and complete the initial setting.
Making adjustments and selections
It is recommended that images be projected continuously for at least 30 \
minutes before the focus is adjusted.
1) 8)5)
3)
1) 5) 7) 8) 9)
6)
7) 9)
2)
4) 2)
4)
3)
1)
Press the button to roughly adjust the focus of the image. ( x page 52)
2) Change the setting of the [PROJECTOR SETUP] menu → [PROJECTION METHOD]...](http://img.usermanuals.tech/thumb/23/100220/w300_projector_manual_9463_d-48.png "Page 49
Chapter 3 Basic Operations — Switching on/off the projector
ENGLISH - 49
3)
Press the button.
f Confirm the setting value and complete the initial setting.
Making adjustments and selections
It is recommended that images be projected continuously for at least 30 \
minutes before the focus is adjusted.
1) 8)5)
3)
1) 5) 7) 8) 9)
6)
7) 9)
2)
4) 2)
4)
3)
1)
Press the button to roughly adjust the focus of the image. ( x page 52)
2) Change the setting of the [PROJECTOR SETUP] menu → [PROJECTION METHOD]...")
Chapter 3 Basic Operations — Switching on/off the projector ENGLISH - 49 3) Press the button. f Confirm the setting value and complete the initial setting. Making adjustments and selections It is recommended that images be projected continuously for at least 30 \ minutes before the focus is adjusted. 1) 8)5) 3) 1) 5) 7) 8) 9) 6) 7) 9) 2) 4) 2) 4) 3) 1) Press the button to roughly adjust the focus of the image. ( x page 52) 2) Change the setting of the [PROJECTOR SETUP] menu → [PROJECTION METHOD]...
Page 50
![Page 50
Chapter 3 Basic Operations — Switching on/off the projector
50 - ENGLISH
Switching off the projector
1)
2)
1)
4)
3)
2)
1) Press the power button.
f The
[POWER OFF] confirmation screen is displayed.
2) Press qw to select [OK], and press the button.
(Or press the power button again.)
f Projection of the image will stop, and the power indicator on the projector body
lights in orange. (The fan keeps running.)
3) Wait until the power indicator lights or blinks in red.
4) Press the side of the...](http://img.usermanuals.tech/thumb/23/100220/w300_projector_manual_9463_d-49.png "Page 50
Chapter 3 Basic Operations — Switching on/off the projector
50 - ENGLISH
Switching off the projector
1)
2)
1)
4)
3)
2)
1) Press the power button.
f The
[POWER OFF] confirmation screen is displayed.
2) Press qw to select [OK], and press the button.
(Or press the power button again.)
f Projection of the image will stop, and the power indicator on the projector body
lights in orange. (The fan keeps running.)
3) Wait until the power indicator lights or blinks in red.
4) Press the side of the...")
Chapter 3 Basic Operations — Switching on/off the projector 50 - ENGLISH Switching off the projector 1) 2) 1) 4) 3) 2) 1) Press the power button. f The [POWER OFF] confirmation screen is displayed. 2) Press qw to select [OK], and press the button. (Or press the power button again.) f Projection of the image will stop, and the power indicator on the projector body lights in orange. (The fan keeps running.) 3) Wait until the power indicator lights or blinks in red. 4) Press the side of the...