Epson Projector Powerlite 5000 User Manual

7.The Link II software communicates with the projector using the
computer’s serial communication (COM) port. Specify which
COM port to use, then press C to continue. (Most likely, your
computer is using COM 1.)8.A summary screen appears stating how much free hard disk space
is required to run the software and how much is available. If
sufficient disk space is available, press C. Otherwise, press X (exit)
to free up some disk space; then restart the installation program
from step 1.
9.You see a prompt to...

4.When prompted that the installation has been completed, click
OK. Then restart your Macintosh for the changes to take effect.
Launching the Software1.Double-click the ELP Link IIprogram icon from the Windows 3.x
ELP Link II program group or Mac OS ELP Link II folder, or
select ELP Link II from the Windows 95 Programs menu. The
ELP Link II program icon appears minimized at the bottom of
your screen.
2.Double-click the ELP Link II program icon. The ELP Link II
main dialog box appears.
Using the Software...

Function Description and Usage
The function list on the left side of the ELP Link II main dialog box
shows the functions available for assignment to an Effects button. To
assign the functions, see page 67.
The table below describes these functions and how to use them.
Note: To use the Effects buttons, the ELP Link II software must be
running and the computer connected to the projector.FunctionDescription and usage
LineDraws a straight line on the screen.
Press the Effects key assigned to this effect....

FunctionDescription and usage
BarCreates a horizontal or vertical bar. You can use this function to
highlight a portion of the screen with a horizontal or vertical bar.
Press the Effects key assigned to this effect. Move the bar using the
remote pointer button. Press the bottom multi-purpose button to lock
the bar in place.
StampLeaves one or several copies of the pre-selected image on the screen.
Press the Effects key assigned to this effect. Use the pointer button
to place the cursor where you want the...

Assigning Functions
There are three ways to assign functions to each of the five Effects
buttons on the remote control:
lDrag and drop a function from the function list to the Effects
button you want to customize.
lClick a function in the function list, click the Effects button
number you want to customize, then click Customize.
lSelect the function from the function list, and then press the
Effects button on the remote control.
Using the Software 

Setting Effect Options
Once you have assigned functions to one or more Effects buttons, you
can specify detailed options for each function.
To set detailed options, click Detail Setting. A dialog box similar to
the following appears. (The options and tabs displayed depend on
which functions are currently assigned to the Effects buttons.)
Click the tab for the function you want to adjust, then make any
settings you wish.
To test each setting, click the Test button and then click the left mouse
button to...

FunctionOptions
LineWidthSpecify the line width, from 1 to 32 points.
GridSpecify whether to have the line “snap” to the corners
of a grid by entering the size of the sides of the box, in
pixels (dots).
ColorChoose a color for the line.
TransparentClick this check box to make the background text or
image visible through the line.
EllipseWidthSpecify the line width, from 1 to 32 points.
ColorChoose a color for the line.
TransparentClick this check box to make the background text or
image visible through...

FunctionOptions
Change
CursorClick on the cursor shape to be used
Clear ScreenNo options available
Macro KeyEnter up to 16 characters, including combinations such as Ctrl + A in
the Registration Keys Macro field. The Backspace and Delete keys are
also recorded.
Click on the Clear button to clear the current key assignment.
Click on the Registration button to save more than one set of key
assignments.
Note: Although you can save multiple sets of key assignments, only
one set can be active at any time.
4 l...

Saving and Recalling Effects Key Button Assignments
To save Effects button assignments, click Execute.
To save multiple sets of button assignments, click Registration and
specify a name for the current settings.
To recall a saved set of assignments, select its name from the Setting
menu.
To delete a set of assignments from the Registration List, select its
name and then click Delete.
To exit without saving the settings, click Exit.
Changing the COM Port Assignment
If you did not select the correct COM...

Controlling Projector Features
You can use the ELP Link II software to control the following features:0 Projector Controls
l Test Pattern
0 Color Properties.
Displaying the Projector Set Window
1.Double-click the ELP Link IIprogram icon from the Windows 3.x
ELP Link II program group or Mac OS ELP Link II folder, or
select ELP Link II from the Windows 95 Programs menu. The
ELP Link II program icon appears minimized on your screen.
2.Double-click the ELP Link IIprogram icon. The main dialog box
appears.
4...