Epson Projector Powerlite 5000 User Manual

3.From the Options menu, select Projector Control. The Projector
Set window appears:
ProjectorTestUser’sColor
ControlPatternLogoProperty
Using the Quick Change Toolbar
To quickly change some basic projector settings, click one of the
toolbar buttons described below:
Power On, Off
Volume Up, Down, Mute
Using the Software 

Changing Projector Settings1.Click Projector Control on the Projector Set dialog box. The
following window appears:
2.Click on the tab for the settings you want to adjust.
3.Change one or more of the following options.
Computer Tab
OptionDescription
BrightnessAdjusts screen brightness.
ContrastAdjusts screen contrast.
SyncAdjusts the sych (synchronization) to remove screen flicker
TrackingAdjusts tracking to remove horizontal lines.
4 l Using the ELP Link II Software 

OptionDescriptionPositionAdjusts the horizontal and vertical screen position
Color
Pattern
DisplayAdjusts the balance of red, green, and blue in the image.
Displays the test pattern currently selected
ResetClick Reset to reset all fields to their default values.
Video Tab
Option
DescriptionBrightnessAdjusts screen brightness.
ContrastAdjusts screen contrast
SaturationAdjusts the color saturation
Tint
ModeAdjusts the color tint. (NTSC only)
Selects the signal format. You can select AUTO, PAL, NTSC, or...

Sound Tab
OptionDescriptionVolumeAdjusts sound volume
ToneAdjusts sound tone
SpatializerSelect one of the following sound qualities for three dimensional-like
sound:
NormalStereo sound is expanded.
WideStereo sound is further expanded to sound more
three-dimensional.
OffStereo sound is not expanded.
ResetClick Reset to reset all fields to their default values
Option Tab
Option
DescriptionBlank ToSpecify if a blank screen is to be displayed when no signal is
connected.
Source
Prompt
InstallTemporarily...

OptionDescriptionView ChangeSpecify how the screen should disappear when changing the image
source:
DiagonallyImages disappear and appear from the top left of the
screen to the bottom right.
Left to RightImages disappear and appear from the left to the right.
Fade InImages appear from the center of the screen and
disappear to the center.
Lamp Life
Pattern
DisplayDisplays the number of hours the lamp has been used.
Displays the test pattern currently selected
ResetClick Reset to reset all fields to their...

Changing the Test Pattern
1.Click Test Pattern on the Projector Set dialog box. The following
window appears:
2.You can display a test pattern when setting up the projector to
verify that the projector is working properly. Choose one of the
following:
Color ImageDisplays a color bar test pattern
Gray ScaleDisplays a gray scale test pattern.
Focus Pattern Displays a character-based focus pattern.
User 
File(bmp)D’ pl yISas a bitmapped test pattern from the file
name specified. Either type the name or...

Setting the Image Color Property1.Click Color Property on the Projector Set dialog box. The Color
Property window appears.
2.Specify a color temperature:
HHigh (more blue)
MMedium (normal white)
LLow (more red)
UserCreate a custom color temperature by using the slide
bars to specify the amount of red and blue.
3.Specify an image gamma:
Gamma 1 Provides a dynamic and contrastive image.
Gamma 2 Provides an image between Gamma 1 and Gamma 3.
Gamma 3 Provides a natural image.
4.Click Pattern Display to...

4 l Using the ELP Link II Software 

Maintenance
The PowerLite 5000 projector needs little maintenance. You should
keep the lens clean because any dirt or smears appear on the screen.
You also need to periodically clean the air filter at the bottom of the
projector. A clogged air filter can block ventilation needed to cool the
projector and keep it from overheating.
The only parts you should replace are the lamp and air filter. If any
other part needs replacing, contact your PowerLite 5000 dealer or a
qualified service person.+Warning:...

can injure you severely. Do not try to service this product yourself: except as
specifically explained in this owner`s Manual. Refer all other servicing to
qualified service personnel.
Cleaning the Lens
Clean the lens whenever you notice dirt or dust on the surface. Lightly
wipe the lens surface with a soft, dry, lint-free cloth. To remove dirt or
smears on the lens, moisten a soft cloth with an alcohol-based cleaner
and gently wipe the lens surface.
Cleaning the Projector Case
To clean the projector...