Epson Projector PowerLite 1440 User Manual

							

2.
Toenlarge orreduce theimage size,rotate theprojectors zoomring.
 Parent
topic:UsingBasicProjector Features
 Focusing
theImage UsingtheFocus Ring
 1.
Turn onthe projector anddisplay animage.
 Note:
Youcandisplay apattern toaid inadjusting theprojected imageusingtheSettings menu.
 Note:
Youcanalso display thepattern bypressing theUser button onthe remote control(ifthe test
 pattern
isassigned tothis button).
 2.
Tosharpen theimage focus,rotatetheprojector ’s focus ring.
 Parent
topic:UsingBasicProjector Features
 Focusing
theImage withFocus Help
 You
canusetheprojectors FocusHelpfeature tofocus theimage.
 Focus
Helpworks inthese conditions:
 •
Screen sizeis100 inches (254cm)orless
 •
The room isnot toobright
 61   
						

							

•
Projector ispositioned withinthedistances andangles listedhere:
 1
 5
to 10 feet (1.5 to3m)
 2
 20
º
 3
 30
º
 1.
Press theFocus Helpbutton onthe projector.
 62   
						

							

You
seeascreen likethis:
 2.
Turn thefocus ringuntil thetwo orange circlesoverlap.
 3.
Ifnecessary, pressEsctoexit theFocus Helpscreen.
 Parent
topic:UsingBasicProjector Features
 Remote
ControlOperation
 The
remote controlletsyou control theprojector fromalmost anywhere inthe room, upto26 feet (8m)
 away.
Youcanpoint itat the screen, orthe front orback ofthe projector.
 63   
						

							

Make
surethatyouaimtheremote controlatthe projectors receiverswithintheangles listedhere.
 1
 26
feet (8m)
 2
 45
°
 3
 30
°
 4
 15
°
 Note:
Avoidusingtheremote controlinconditions withbright fluorescent lightsorindirect sunlight, or
 the
projector maynotrespond tocommands. Ifyou willnot use theremote controlforalong time,
 remove
thebatteries.
 Using
theRemote ControlasaWireless Mouse
 Using
theRemote ControlasaPointer
 Parent
topic:UsingBasicProjector Features
 Related
tasks
 Replacing
theRemote ControlBatteries
 64  
						

							

Using
theRemote ControlasaWireless Mouse
 You
canusetheprojectors remotecontrolasawireless mousesoyou cancontrol projection ata
 distance
fromthecomputer.
 1.
Connect theprojector toacomputer usingtheprojectors USB-B,Computer ,or HDMI portto
 display
video.
 2.
Ifyou connected yourcomputer toaport other thantheprojectors USB-Bport,alsoconnect aUSB
 cable
tothe projectors USB-BportandtoaUSB portonyour computer (forwireless mouse
 support).

3.
Start yourpresentation.
 4.
Use thefollowing buttonsonthe remote controltocontrol yourpresentation:
 •
To move through slidesorpages, presstheupordown Pagebuttons.
 •
To move thecursor onthe screen, usethearrow buttons.
 •
To left-click, pressthe button once(press ittwice todouble-click).
 •
To right-click, presstheEsc button.
 •
To drag-and-drop, holdthe button asyou move thecursor withthearrow buttons, thenrelease
 at
the destination.
 Parent
topic:Remote ControlOperation
 Related
references
 Projector
SetupSettings -Extended Menu
 65     
						

							

Using
theRemote ControlasaPointer
 You
canusetheprojectors remotecontrolasapointer tohelp youcalloutimportant information onthe
 screen.
Thedefault pointer shapeisan arrow, butyou canselect analternative shapeusingtheSettings
 menu.

1.
Press thePointer buttononthe remote control.
 2.
Use thearrow buttons onthe remote controltomove thepointer onthe screen.
 3.
Press Esctoclear thepointer fromthescreen.
 Parent
topic:Remote ControlOperation
 Related
references
 Projector
FeatureSettings -Settings Menu
 Selecting
anImage Source
 If
you connected multipleimagesources tothe projector, suchasacomputer andDVD player, youmay
 want
toswitch fromoneimage source tothe other.
 1.
Make suretheconnected imagesource youwant touse isturned on.
 2.
Forvideo image sources, insertaDVD orother video media andpress itsplay button, ifnecessary.
 66   
						

							

3.
Doone ofthe following:
 •
Press theSource Searchbuttononthe projector orremote controluntilyouseetheimage from
 the
source youwant.
 •
Press thebutton forthe source youwant onthe remote control. Ifthere ismore thanoneport for
 that
source, pressthebutton againtocycle through thesources.
 1
 Computer
portsources
 2
 Video,
HDMI,andMHL sources
 3
 USB
portsources (computer displayandexternal devices)
 67    
						

							

4
 Network
source
 Parent
topic:UsingBasicProjector Features
 Projection
Modes
 Depending
onhow youpositioned theprojector, youmay need tochange theprojection modesoyour
 images
projectcorrectly.
 •
Front (default setting)letsyou project fromatable infront ofthe screen.
 •
Front/Ceiling flipstheimage overtop-to-bottom toproject upside-down fromaceiling orwall mount.
 •
Rear flipstheimage horizontally toproject frombehind atranslucent screen.
 •
Rear/Ceiling flipstheimage overtop-to-bottom andhorizontally toproject fromtheceiling andbehind
 a
translucent screen.
 Changing
theProjection ModeUsing theRemote Control
 Changing
theProjection ModeUsing theMenus
 Parent
topic:UsingBasicProjector Features
 Changing
theProjection ModeUsing theRemote Control
 You
canchange theprojection modetoflip the image overtop-to-bottom.
 1.
Turn onthe projector anddisplay animage.
 2.
Hold down theA/V Mute button onthe remote controlforfive seconds.
 The
image disappears brieflyandreappears flippedtop-to-bottom.
 68  
						

							

3.
Tochange projection backtothe original mode,holddown theA/V Mute button forfive seconds
 again.

Parent
topic:Projection Modes
 Changing
theProjection ModeUsing theMenus
 You
canchange theprojection modetoflip the image overtop-to-bottom and/orleft-to-right usingthe
 projector
menus.
 1.
Turn onthe projector anddisplay animage.
 2.
Press theMenu button.
 3.
Select theExtended menuandpress Enter.
 4.
Select theProjection settingandpress Enter.
 5.
Select aprojection modeandpress Enter.
 6.
Press Menu orEsc toexit themenus.
 Parent
topic:Projection Modes
 Image
Aspect Ratio
 The
projector candisplay images indifferent width-to-height ratioscalled aspect ratios.Normally the
 input
signal fromyourvideo source determines theimages aspectratio.However, forcertain images
 you
canchange theaspect ratiotofityour screen bypressing abutton onthe remote control.
 69 
						

							

If
you always wanttouse aparticular aspectratioforacertain videoinputsource, youcanselect itusing
 the
projectors menus.
 Changing
theImage Aspect Ratio
 Available
ImageAspect Ratios
 Parent
topic:UsingBasicProjector Features
 Related
references
 Input
Signal Settings -Signal Menu
 Changing
theImage Aspect Ratio
 You
canchange theaspect ratioofthe displayed imagetoresize it.
 1.
Turn onthe projector andswitch tothe image source youwant touse.
 2.
Press theAspect buttononthe remote control.
 The
shape andsize ofthe displayed imagechanges, andthename ofthe aspect ratioappears
 briefly
onthe screen.
 3.
Tocycle through theavailable aspectratiosforyour input signal, presstheAspect button
 repeatedly.

Parent
topic:Image Aspect Ratio
 Available
ImageAspect Ratios
 You
canselect thefollowing imageaspect ratios,depending onthe input signal fromyourimage source.
 Note:
Blackbands andcropped imagesmayproject incertain aspectratios,depending onthe aspect
 ratio
andresolution ofyour input signal.
 70