Epson Projector PowerLite 1440 User Manual

							

7.
Select theWired LANmenu andpress Enter.
 8.
Ifnecessary, selectIPSettings andpress Enter.
 9.
Select yourIPSettings asnecessary:
 •
Ifyour network assignsaddresses automatically, turnonthe DHCP setting.
 •
Ifyou must setaddresses manually,turnoffDHCP andenter theprojectors IPAddress ,Subnet
 Mask
,and Gateway Addressasneeded.
 Note:
Tohighlight thenumbers youwant fromthedisplayed keyboard, pressthearrow buttons on
 the
remote control. Toselect ahighlighted number,pressEnter.
 10.
Toprevent displayofthe IPaddress onthe standby screen,turnoffIPAddress Display.
 11.
When youfinish selecting settings,selectComplete andfollow theon-screen instructions tosave
 your
settings andexitthemenus.
 Parent
topic:WiredNetwork Projection
 Setting
UpProjector NetworkE-MailAlerts
 You
cansetupthe projector tosend youane-mail alertover thenetwork ifthere isaproblem withthe
 projector.

1.
Press theMenu button.
 2.
Select theNetwork menuandpress Enter.
 41 
						

							

3.
Select Network Configuration andpress Enter.
 4.
Select theMail menu andpress Enter.
 5.
Turn onMail Notification .
 6.
Enter theIPaddress forthe SMTP Server option.
 Note:
Donot use these addresses: 127.x.x.xor224.0.0.0 through255.255.255.255 (wherexis a
 number
from0to 255).
 7.
Select anumber forthe SMTP server PortNumber ,from 1to 65535 (default is25).
 8.
Choose anAddress field,enter thee-mail address, andselect thealerts youwant toreceive there.
 Repeat
foruptothree addresses.
 Note:
Youre-mail address canbeupto32 alphanumeric characterslong.
 9.
When youfinish selecting settings,selectComplete andfollow theon-screen instructions tosave
 your
settings andexitthemenus.
 Note:
Ifa critical problem causesaprojector toshut down, youmay notreceive ane-mail alert.
 Network
Projector E-mailAlertMessages
 Parent
topic:UsingtheProjector onaNetwork
 42 
						

							

Network
Projector E-mailAlertMessages
 When
aproblem occurswithanetworked projector,andyouselected toreceive e-mailalerts,you
 receive
ane-mail containing thefollowing information:
 •
Epson Projector onthe subject line
 •
The name ofthe projector experiencing aproblem
 •
The IPaddress ofthe affected projector
 •
Detailed information abouttheproblem
 Note:
Ifa critical problem causesaprojector toshut down, youmay notreceive ane-mail alert.
 Parent
topic:Setting UpProjector NetworkE-MailAlerts
 Setting
UpMonitoring UsingSNMP
 Network
administrators caninstall SNMP (Simple Network Management Protocol)softwareonnetwork
 computers
sothey canmonitor projectors. Ifyour network usesthissoftware, youcansetupthe
 projector
forSNMP monitoring.
 1.
Press theMenu button.
 2.
Select theNetwork menuandpress Enter.
 3.
Select Network Configuration andpress Enter.
 4.
Select theOthers menuandpress Enter.
 43 
						

							

5.
Enter uptotwo IPaddresses toreceive SNMPnotifications, using0to 255 foreach address field.
 Note:
Donot use these addresses: 127.x.x.xor224.0.0.0 through255.255.255.255 (wherexis a
 number
from0to 255).
 6.
Ifavailable, selectthePriority Gateway settingforyour network.
 7.
Ifyour network environment usesanAMX controller, turnonthe AMX Device Discovery settingto
 allow
theprojector tobe detected.
 8.
Ifyour network environment usesaCrestron RoomView controller,turnonthe Crestron RoomView
 setting
toallow theprojector tobe detected.
 9.
Ifyou areconnecting toanetwork usingBonjour, turnonthe Bonjour setting.
 10.
When youfinish selecting settings,selectComplete andfollow theon-screen instructions tosave
 your
settings andexitthemenus.
 Parent
topic:UsingtheProjector onaNetwork
 Controlling
aNetworked ProjectorUsingaWeb Browser
 Once
youhave connected yourprojector toyour network, youcanselect projector settingsandcontrol
 projection
usingacompatible webbrowser. Thisletsyou access theprojector remotely.
 Note:
Theweb setup andcontrol features supportMicrosoft InternetExplorer 8.0orlater, andSafari on
 networks
thatdonot use aproxy server forconnection. Youcannot selectallofthe projector menu
 settings
orcontrol allprojector functions usingaweb browser.
 Note:
Ifyou setStandby ModetoCommunication On,you canuseaweb browser toselect settings
 and
control projection evenifthe projector isin standby mode.
 1.
Make suretheprojector isturned on.
 2.
Start yourwebbrowser onacomputer ordevice connected tothe network.
 3.
Type theprojectors IPaddress intothebrowsers addressboxand press thecomputers Enterkey.
 Note:
Youmay need tolog inbefore youseetheWeb Control screen. Ifyou seealog inwindow,
 enter
yourusername andpassword. (Thedefault username isEPSONWEB andthedefault
 password
isadmin .)
 You
seetheWeb Control screen.
 44 
						

							

4.
Toselect projector menusettings, selectthename ofthe menu andfollow theon-screen
 instructions.

5.
Tocontrol projection remotely,selecttheWeb Remote option.
 You
seeascreen likethis:
 1
 Power
buttoncontrol
 2
 Selects
Computer portsource
 3
 Selects
VideoandHDMI portsources
 4
 Freeze
buttoncontrol
 5
 A/V
Mute button control
 6
 Page
Upand Page Down button controls
 7
 Searches
forsources
 8
 Selects
thenetwork source
 9
 Selects
theUSB Display orUSB device source
 10
 Volume
buttoncontrols
 11
 Closed
Caption control
 6.
Select theicon corresponding tothe projector functionyouwant tocontrol.
 45  
						

							

Parent
topic:UsingtheProjector onaNetwork
 Crestron
RoomView Support
 If
you areusing theCrestron RoomView networkmonitoring andcontrol system, youcansetupyour
 projector
foruse onthe system. Crestron RoomView letsyou control andmonitor yourprojector usinga
 web
browser.
 Note:
Youcannot usetheEpson WebControl featurewhenyouuseCrestron RoomView.
 For
additional information onCrestron RoomView, contactCrestron.
 Setting
UpCrestron RoomView Support
 Controlling
aNetworked ProjectorUsingCrestron RoomView
 Parent
topic:UsingtheProjector onaNetwork
 Setting
UpCrestron RoomView Support
 To
set upyour projector formonitoring andcontrol usingaCrestron RoomView system,makesureyour
 computer
andprojector areconnected tothe network.
 Note:
Ifyou want touse theCrestron RoomView systemwhentheprojector isturned off,you need to
 adjust
theStandby Modesettings inthe ECO menu.
 1.
Press theMenu button.
 2.
Select theNetwork menuandpress Enter.
 3.
Select Network Configuration andpress Enter.
 46 
						

							

4.
Select theOthers menuandpress Enter.
 5.
SettheCrestron RoomView settingtoOn toallow theprojector tobe detected.
 6.
When youfinish selecting settings,selectComplete andfollow theon-screen instructions tosave
 your
settings andexitthemenus.
 7.
Turn offthe projector, thenturniton again toenable thesetting.
 Parent
topic:Crestron RoomView Support
 Controlling
aNetworked ProjectorUsingCrestron RoomView
 Once
youhave setupyour projector touse Crestron RoomView, youcancontrol andmonitor projection
 using
acompatible webbrowser.
 1.
Start yourwebbrowser onacomputer connected tothe network.
 2.
Type theprojectors IPaddress intothebrowsers addressboxand press thecomputers Enterkey.
 47 
						

							

You
seethisscreen:
 3.
Select theinput source thatyouwant tocontrol inthe Sources Listbox. Youcanscroll through
 available
sourcesusingtheupand down arrows inthe box.
 4.
Tocontrol projection remotely,clicktheon-screen buttonsthatcorrespond tothe projectors remote
 control
buttons. Youcanscroll through buttonoptions atthe bottom ofthe screen.
 Note:
These on-screen buttonsdonot directly correspond tothe projectors remotecontrolbuttons:
 •
OK acts asthe Enter button
 •
Menu displays theprojectors menu
 5.
Toview information abouttheprojector, clicktheInfo tab.
 6.
Tochange projector, Crestron,andpassword settings,clicktheTools tab,select settings onthe
 displayed
screen,andclick Send .
 7.
When youfinish selecting settings,clickExittoexit theprogram.
 Parent
topic:Crestron RoomView Support
 48  
						

							

Using
BasicProjector Features
 Follow
theinstructions inthese sections touse your projectors basicfeatures.
 Turning
Onthe Projector
 Turning
Offthe Projector
 Selecting
theLanguage forthe Projector Menus
 Adjusting
theImage Height
 Image
Shape
 Resizing
theImage withtheZoom Ring
 Focusing
theImage UsingtheFocus Ring
 Focusing
theImage withFocus Help
 Remote
ControlOperation
 Selecting
anImage Source
 Projection
Modes
 Image
Aspect Ratio
 Color
Mode
 Controlling
theVolume withtheVolume Buttons
 Projecting
aPC Free Presentation
 Related
references
 Projector
SetupSettings -Extended Menu
 Turning
Onthe Projector
 Turn
onthe computer orvideo equipment youwant touse before youturn onthe projector soitcan
 display
theimage source.
 49 
						

							

1.
Open theprojectors lenscover.
 2.
Connect thepower cordtothe projectors powerinlet.
 3.
Plug thepower cordintoanelectrical outlet.
 Note:
WithDirect Power Onturned on,theprojector turnsonassoon asyou plug itin.
 50