Epson Projector PowerLite 1440 User Manual

							

1.
Connect theaudio cabletoyour laptops headphone oraudio-out jack,oryour desktops speakeror
 audio-out
port.
 2.
Connect theother endtothe Audio portthatcorresponds tothe Computer portyouareusing.
 Parent
topic:Connecting toComputer Sources
 Connecting
toExternal Speakers
 To
enhance thesound fromyourpresentation, youcanconnect theprojector toexternal self-powered
 speakers.
Youcancontrol thevolume usingtheprojectors remotecontrol.
 You
canalso connect theprojector toan amplifier withspeakers.
 If
you want tooutput audiofromtheexternal speakers whentheprojector isturned off,you need to
 select
Communication Onforthe Standby Modesetting andAlways Onforthe A/V Output settingin
 the
projectors Extendedmenu.
 Note:
Theprojectors built-inspeaker systemisdisabled whenyouconnect external speakers.
 1.
Make sureyourcomputer orvideo source isconnected tothe projector withboth audio andvideo
 cables
asnecessary.
 2.
Locate theappropriate cabletoconnect yourexternal speakers, suchasastereo mini-jack-to-pin-
 jack
cable, oranother typeofcable oradapter.
 3.
Connect oneendofthe cable toyour external speakers asnecessary.
 4.
Connect thestereo mini-jack endofthe cable toyour projectors AudioOutport.
 Parent
topic:Projector Connections
 31   
						

							

Connecting
toan External Computer Monitor
 If
you connected acomputer tothe projectors Computer port,youcanalso connect anexternal monitor
 to
the projector. Thisletsyou seeyour presentation onthe external monitorevenwhen theprojected
 image
isnot visible.
 If
you want tooutput images toan external monitorwhentheprojector isturned off,you need toselect
 Communication
Onasthe Standby Modesetting andAlways Onasthe A/V Output settinginthe
 projectors
menusystem.
 Note:
Monitors thatusearefresh rateless than 60Hz may notbeable todisplay images correctly.
 1.
Make sureyourcomputer isconnected tothe projectors Computer port.
 2.
Connect theexternal monitors cabletoyour projectors MonitorOutport.
 Parent
topic:Projector Connections
 Connecting
toExternal USBDevices
 Follow
theinstructions inthese sections toconnect external USBdevices tothe projector.
 USB
Device Projection
 Connecting
aUSB Device orCamera tothe Projector
 Selecting
theConnected USBSource
 Disconnecting
aUSB Device orCamera FromtheProjector
 Parent
topic:Projector Connections
 USB
Device Projection
 You
canproject images andother content withoutusingacomputer orvideo device byconnecting anyof
 these
devices toyour projector:
 •
USB flash drive
 •
Digital camera orsmartphone
 •
USB harddrive
 32  
						

							

•
Multimedia storageviewer
 •
USB memory cardreader
 Note:
Digital cameras orsmartphones mustbeUSB-mounted devices,notTWAIN-compliant devices,
 and
must beUSB Mass Storage Class-compliant.
 Note:
USBharddrives mustmeet these requirements:
 •
USB Mass Storage Class-compliant (notallUSB Mass Storage Classdevices aresupported)
 •
Formatted inFAT orFAT32
 •
Self-powered bytheir ownACpower supplies (bus-powered harddrives arenotrecommended)
 •
Does nothave multiple partitions
 You
canalso usetheEasyMP PCFree feature tocreate yourownslide shows containing converted
 PowerPoint
filesandimage files,andproject themfromaconnected USBdevice ormemory card
 reader.

Parent
topic:Connecting toExternal USBDevices
 Related
topics
 Projecting
aPC Free Presentation
 Connecting
aUSB Device orCamera tothe Projector
 You
canconnect yourUSB device orcamera tothe projectors USB-Aportanduseitto project images
 and
other content.
 1.
Ifyour USB device camewithapower adapter, plugthedevice intoanelectrical outlet.
 2.
Connect theUSB cable (orUSB flash drive orUSB memory cardreader) tothe projectors USB-A
 port.

Note:
Donot connect aUSB huboraUSB cable longer than10feet (3m), orthe device maynot
 operate
correctly.
 33  
						

							

3.
Connect theother endofthe cable (ifapplicable) toyour device.
 Parent
topic:Connecting toExternal USBDevices
 Related
topics
 Projecting
aPC Free Presentation
 Selecting
theConnected USBSource
 You
canswitch theprojectors displaytothe source youconnected tothe USB-A port.
 1.
Make suretheconnected USBsource isturned on,ifnecessary.
 2.
Press theUSB button onthe remote control.
 3.
Press thebutton againtocycle through otherUSBsources, ifavailable.
 Parent
topic:Connecting toExternal USBDevices
 Disconnecting
aUSB Device orCamera FromtheProjector
 When
youfinish presenting withaconnected USBdevice orcamera, youmust prepare todisconnect the
 device
fromtheprojector.
 1.
Ifthe device hasapower button, turnoffand unplug thedevice.
 2.
Disconnect theUSB device orcamera fromtheprojector.
 Parent
topic:Connecting toExternal USBDevices
 Installing
Batteriesinthe Remote Control
 The
remote controlusesthetwo AAbatteries thatcame withtheprojector.
 Caution:
Useonly thetype ofbatteries specified inthis manual. Donot install batteries ofdifferent types,
 or
mix new andoldbatteries.
 34 
						

							

1.
Remove thebattery cover.
 2.
Insert thebatteries withthe+and –ends facing asshown.
 35   
						

							

3.
Replace thebattery coverandpress itdown untilitclicks intoplace.
 Warning:
Disposeofused batteries according tolocal regulations. Donot expose batteries toheat
 or
flame. Keepbatteries outofthe reach ofchildren; theyarechoking hazards andarevery
 dangerous
ifswallowed.
 Parent
topic:Setting Upthe Projector
 Opening
theLens Cover
 To
open theprojectors lenscover, slidetheA/V Mute slidelever untilitclicks intotheopen position.
 36   
						

							

Parent
topic:Setting Upthe Projector
 37 
						

							

Using
theProjector onaNetwork
 Follow
theinstructions inthese sections toset upyour projector foruse onanetwork.
 Wired
Network Projection
 Setting
UpProjector NetworkE-MailAlerts
 Setting
UpMonitoring UsingSNMP
 Controlling
aNetworked ProjectorUsingaWeb Browser
 Crestron
RoomView Support
 Wired
Network Projection
 You
cansend images toyour projector throughawired network. Todothis, youconnect theprojector to
 your
network, andthen setupyour projector andcomputer fornetwork projection.
 After
connecting andsetting upthe projector asdescribed here,download andinstall theEasyMP
 Network
Projection softwaretoset upyour computer fornetwork projection. Downloadandview the
 EasyMP
NetworkProjection OperationGuideforinstructions.
 Note:
Ifyour projector isconnected viaaLAN cable toanetwork thatincludes awireless accesspoint,
 you
canconnect tothe projector wirelessly throughtheaccess pointusing theEasyMP Network
 Projection
software.
 Connecting
toaWired Network
 Selecting
WiredNetwork Settings
 Parent
topic:UsingtheProjector onaNetwork
 Connecting
toaWired Network
 To
connect theprojector toawired localareanetwork (LAN),usea100Base-TX or10Base-T network
 cable.
Toensure properdatatransmission, useaCategory 5shielded cableorbetter.
 1.
Connect oneendofthe network cabletoyour network hub,switch, orrouter.
 2.
Connect theother endofthe cable tothe projectors LANport.
 38  
						

							

Parent
topic:WiredNetwork Projection
 Selecting
WiredNetwork Settings
 Before
youcanproject fromcomputers onyour network, youmust select thenetwork settingsforthe
 projector
usingitsmenu system.
 Note:
Makesureyoualready connected theprojector toyour wired network usingtheLAN port.
 1.
Turn onthe projector.
 2.
Press theMenu button.
 3.
Select theNetwork menuandpress Enter.
 4.
Select Network Configuration andpress Enter.
 39 
						

							

5.
Select theBasic menuandpress Enter.
 6.
Select thefollowing basicoptions asnecessary:
 •
Projector Nameletsyou enter aname upto16 alphanumeric characterslongtoidentify the
 projector
overthenetwork.
 •
PJLink Password letsyou enter apassword upto32 alphanumeric characterslongforusing the
 PJLink
protocol forprojector control.
 •
Web Control Password letsyou enter apassword upto8alphanumeric characterslongfor
 accessing
theprojector overtheweb.
 •
Projector Keywordletsyou turn onasecurity password toprevent accesstothe projector by
 anyone
notinthe room withit.You must enter adisplayed, randomized keywordfromacomputer
 using
theEasyMP NetworkProjection softwaretoaccess theprojector.
 Note:
Usethedisplayed keyboardtoenter thename, passwords andkeyword. Pressthearrow
 buttons
onthe remote controltohighlight characters andpress Enter toselect them.
 40