Epson Projector PowerLite 1440 User Manual

							

Projector
Environmental Specifications
 Temperature
 Operating:
41to95 °F (5 to35 °C)
 Up
to7500 ft(2286 m):41to95 °F (5 to35 °C)
 7500
ft(2286 m)to9843 feet(3000 m):41 to86 °F (5 to30 °C)
 Storage:
14to140 °F (– 10 to60 °C)
 Humidity
(relative,non-
 Operating:
20to80%
 condensing)

Storage:
10to90%
 Operating
altitude
 Up
to4921 feet(1500 m)
 Up
to9843 feet(3000 m)with High Altitude Modeenabled
 Parent
topic:Technical Specifications
 Projector
SafetyandApprovals Specifications
 United
States
 FCC
Part15Class B(DoC)
 UL60950-1
2ndedition (cTUVus Mark)
 Canada
 ICES-003
ClassB
 CSA
C22.2 No.60950-1
 Parent
topic:Technical Specifications
 Supported
VideoDisplay Formats
 For
best results, yourcomputers monitorportorvideo cardresolution shouldbeset todisplay inthe
 projectors
nativeresolution. However,yourprojector includesEpsonsSizeWise chipthatsupports other
 computer
displayresolutions, soyour image willberesized tofitautomatically.
 Your
computers monitorportorvideo cardrefresh rate(vertical frequency) mustbecompatible withthe
 projector.
(Seeyourcomputer orvideo cardmanual fordetails.)
 The
table hereliststhecompatible refreshrateandresolution foreach compatible videodisplay format.
 Display
format
 Refresh
rate(inHz)
 Resolution
(inpixels)
 Computer
signals(analog RGB)
 151 
						

							

Display
format
 Refresh
rate(inHz)
 Resolution
(inpixels)
 VGA
 60/72/75/85
 640
×480
 SVGA
 56/60/72/75/85
 800
×600
 XGA
 60/72/75/85
 1024
×768
 WXGA
 60
 1280
×768
 60
 1366
×768
 60/75/85
 1280
×800
 WXGA+
 60/75/85
 1440
×900
 WXGA++
 60
 1600
×900
 SXGA
 70/75/85
 1152
×864
 60/75/85
 1280
×1024
 60/75/85
 1280
×960
 SXGA+
 60/75
 1400
×1050
 WSXGA+*
 60
 1680
×1050
 UXGA
 60
 1600
×1200
 WUXGA
 60
 1900
×1200
 MAC13
 67
 640
×480
 MAC16
 75
 832
×624
 MAC19
 75
 1024
×768
 59
 1024
×768
 MAC21
 75
 1152
×870
 Composite
video
 TV
(NTSC)
 60
 720
×480
 TV
(SECAM)
 50
 720
×576
 TV
(PAL)
 50/60
 720
×576
 Component
video
 SDTV
(480i)
 60
 720
×480
 152 
						

							

Display
format
 Refresh
rate(inHz)
 Resolution
(inpixels)
 SDTV
(576i)
 50
 720
×576
 SDTV
(480p)
 60
 720
×480
 SDTV
(576p)
 50
 720
×576
 HDTV
(720p)
 50/60
 1280
×720
 HDTV
(1080i)
 50/60
 1920
×1080
 HDTV
(1080p)
 50/60
 1920
×1080
 HDMI
inputsignals
 VGA
 60
 640
×480
 SVGA
 60
 800
×600
 XGA
 60
 1024
×768
 WXGA
 60
 1280
×800
 60
 1366
×768
 WXGA+
 60
 1440
×900
 WXGA++
 60
 1600
×900
 WSXGA+
 60
 1680
×1050
 SXGA
 60
 1280
×960
 60
 1280
×1024
 SXGA+
 60
 1400
×1050
 UXGA
 60
 1600
×1200
 WUXGA+
 60
 1920
×1200
 SDTV
(480i/480p)
 60
 720
×480
 SDTV
(576i/576p)
 50
 720
×576
 HDTV
(720p)
 50/60
 1280
×720
 HDTV
(1080i)
 50/60
 1920
×1080
 HDTV
(1080p)
 24/30/50/60
 1920
×1080
 MHL
input signals
 153 
						

							

Display
format
 Refresh
rate(inHz)
 Resolution
(inpixels)
 VGA
 60
 640
×480
 SDTV
(480i/480p)
 60
 720
×480
 SDTV
(576i/576p)
 50
 720
×576
 HDTV
(720p)
 50/60
 1280
×720
 HDTV
(1080i)
 50/60
 1920
×1080
 HDTV
(1080p)
 24/30
 1920
×1080
 *
Wide resolution only
 Parent
topic:Technical Specifications
 USB
Display System Requirements
 Your
computer systemmustmeet thesystem requirements heretouse theprojectors USBDisplay
 software.

Requirement
 Windows
 Mac

Operating
system
 Windows
XPProfessional, Home
 OS
X10.5.8 (32-bit); OSX10.6.x,
 Edition,
andTablet PCEdition (32-bit);
 10.7.x,
10.8.x,10.9.x,or10.10.x (32-
 except
forService Pack1
 and
64-bit)
 Windows
VistaUltimate, Enterprise,
 Business,
HomePremium, andHome
 Basic
(32-bit)
 Windows
7Ultimate, Enterprise,
 Professional,
andHome Premium (32-
 and
64-bit); HomeBasicandStarter (32-
 bit)

Windows
8.x,Windows 8Enterprise and
 Pro
(32- and64-bit)
 USB
version
 USB
1.1and above (USB2.0recommended)
 CPU
 Mobile
Pentium III1.2 GHz orfaster
 Power
PCG41GHz orfaster (Core
 (1.6
GHz orfaster recommended)
 Duo
1.83 GHz orfaster
 recommended)

154 
						

							

Requirement
 Windows
 Mac

Memory
 256MB
ormore (512MB ormore
 512MB
ormore
 recommended)

Hard
diskspace
 20MB
ormore
 Display
 Resolution
between640×480 and
 Resolution
between640×480 and
 1920
×1200, 16-bitcolororgreater
 1920
×1200, 16-bitcolororgreater
 Parent
topic:Technical Specifications
 155 
						

							

Notices

Check
thesesections forimportant noticesaboutyourprojector.
 Recycling

Important
SafetyInformation
 Important
SafetyInstructions
 FCC
Compliance Statement
 Trademarks

Open
Source Software License
 Copyright
Notice
 Recycling

Epson
offersarecycling programforend oflife products. Pleasegotothis site forinformation onhow to
 return
yourproducts forproper disposal.
 Parent
topic:Notices
 Important
SafetyInformation
 Caution:
Neverlookintotheprojector lenswhen thelamp isturned on;thebright lightcandamage your
 eyes.
Never letchildren lookintothelens when itis on. Never openanycover onthe projector, except
 the
lamp andfilter covers. Dangerous electricalvoltagesinsidetheprojector canseverely injureyou.
 Except
asspecifically explainedinthis Users Guide,do not attempt toservice thisproduct yourself.
 Refer
allservicing toqualified servicepersonnel.
 Warning:
Theprojector anditsaccessories comepackaged inplastic bags.Keepplastic bagsaway
 from
small children toavoid anyriskofsuffocation.
 Caution:
Whenyoureplace thelamp, never touchthenew lamp withyour bare hands; theinvisible
 residue
leftbythe oilon your hands mayshorten thelamp life.Use acloth orglove tohandle thenew
 lamp.

Parent
topic:Notices
 156 
						

							

Important
SafetyInstructions
 Follow
thesesafety instructions whensetting upand using theprojector:
 •
Do not look intothelens when theprojector ison. The bright lightcandamage youreyes. Avoid
 standing
infront ofthe projector sothe bright lightdoes notshine intoyour eyes.
 •
Do not place theprojector onanunstable cart,stand, ortable.
 •
Do not operate theprojector onitsside, orwhile tiltedtoone side. Donot tiltthe projector morethan
 30
°forward orback.
 •
Ifthe projector ismounted onaceiling orwall, itshould beinstalled byqualified technicians using
 mounting
hardware designedforuse with thisprojector.
 •
When installing oradjusting aceiling orwall mount, donot use adhesives toprevent thescrews from
 loosening
anddonot use oilsorlubricants. Thismay cause theprojector casetocrack andthe
 projector
tofall from itsceiling mount. Thiscould cause serious injurytoanyone underthemount and
 could
damage theprojector.
 •
Do not use theprojector nearwater, sources ofheat, high-voltage electricalwires,orsources of
 magnetic
fields.
 •
Use thetype ofpower source indicated onthe projector. Useofadifferent powersource mayresult in
 fire
orelectric shock.Ifyou arenotsure ofthe power available, consultyourdealer orpower company.
 •
Place theprojector nearawall outlet where theplug canbeeasily unplugged.
 •
Take thefollowing precautions whenhandling theplug: Donot hold theplug withwethands. Donot
 insert
theplug intoadusty outlet. Inserttheplug firmly intotheoutlet. Donot pull thepower cordwhen
 disconnecting
theplug; always besure tohold theplug when disconnecting it.Do not overload wall
 outlets,
extension cords,orpower strips.Failure tocomply withthese precautions couldresult infire or
 electric
shock.
 •
Do not place theprojector wherethecord canbewalked on.This may result infraying ordamage to
 the
plug.
 •
Unplug theprojector fromthewall outlet andallow tocool before cleaning. Useadry cloth (or,for
 stubborn
dirtorstains, amoist cloththathasbeen wrung dry)forcleaning. Donot use liquid oraerosol
 cleaners,
anysprays containing flammable gas,orsolvents suchasalcohol, paintthinner, orbenzine.
 •
Do not block theslots andopenings inthe projector case.Theyprovide ventilation andprevent the
 projector
fromoverheating. Donot operate theprojector onasofa, rug,orother softsurface, orset it
 on
top ofloose papers. Donot cover theprojector withablanket, curtain,ortablecloth. Ifyou are
 setting
upthe projector nearawall, leave atleast 7.9inches (20cm) ofspace between thewall and
 the
projector.
 •
Do not operate theprojector inaclosed-in cabinetunlessproperventilation isprovided.
 157 
						

							

•
Never allowobjects ofany kind toenter anyopenings inthe projector. Donot leave objects, especially
 flammable
objects,neartheprojector. Neverspillliquid ofany kind intotheprojector.
 •
Ifyou areusing twoormore projectors side-by-side, leaveatleast 2feet (60cm) ofspace between the
 projectors
toallow forproper ventilation.
 •
You may need toclean theairfilter andvent. Aclogged airfilter orvent canblock ventilation needed
 to
cool theprojector. Donot use canned air,orthe gases mayleave aresidue.
 •
Do not store theprojector outdoors foranextended lengthoftime.
 •
Except asspecifically explainedinthis manual, donot attempt toservice thisproduct yourself. Refer
 all
servicing toqualified personnel. Openingorremoving coversmayexpose youtodangerous
 voltages
andother hazards.
 •
Never openanycovers onthe projector exceptasspecifically explainedinthis manual. Neverattempt
 to
disassemble ormodify theprojector. Referallrepairs toqualified servicepersonnel.
 •
Unplug theprojector fromthewall outlet andrefer servicing toqualified servicepersonnel underthe
 following
conditions: ifitdoes notoperate normally whenyoufollow theoperating instructions, or
 exhibits
adistinct change inperformance; ifsmoke, strange odors,orstrange noisescomefromthe
 projector;
ifthe power cordorplug isdamaged orfrayed; ifliquid orforeign objects getinside the
 projector,
orifithas been exposed torain orwater; ifithas been dropped orthe housing hasbeen
 damaged.

•
Do not touch theplug during anelectrical storm.Otherwise, youmay receive anelectric shock.
 •
Unplug theprojector whenitwill not beused forextended periods.
 •
Do not use theprojector whereitmay beexposed torain, water, orexcessive humidity.
 •
Do not use orstore theprojector whereitmay beexposed tosmoke, steam,corrosive gases,
 excessive
dust,vibration, orshock.
 •
Do not use theprojector whereflammable orexplosive gasesmaybepresent.
 •
Do not use orstore theprojector orremote controlinahot location, suchasnear aheater, indirect
 sunlight,
orinaclosed vehicle.
 •
Ifyou usetheprojector inacountry otherthanwhere youpurchased it,use thecorrect powercordfor
 that
country.
 •
Do not stand onthe projector orplace heavy objects onit.
 •
Do not use theprojector outsideofthe required temperature rangeof41 to95 °F (5 to35 °C). Doing
 so
may cause anunstable displayandcould leadtoprojector damage. Donot use orstore the
 projector
whereitmay beexposed tosudden changes intemperature.
 158 
						

							

•
Do not store theprojector outsideofthe required temperature rangeof14 to140 °F (– 10 to60 °C) or
 in
direct sunlight forlong periods oftime. Doing somay cause damage tothe case.
 •
Do not place anything thatcanbecome warpedordamaged byheat near theexhaust vents.Donot
 bring
yourhands orface close tothe vents whileprojection isin progress. Donot bring yourfaceclose
 to
the projector whileitis in use.
 •
Before youmove theprojector, makesureitspower isturned off,the plug isdisconnected fromthe
 outlet,
andallcables aredisconnected.
 •
Never trytoremove thelamp immediately afterusebecause itwill beextremely hot.Before removing
 the
lamp, turnoffthe power andwait atleast anhour toallow thelamp tocool completely.
 •
Do not disassemble thelamp orsubject itto impacts.
 •
Do not place thesource ofan open flame, suchasalit candle, onornear theprojector.
 •
Do not block thelens during projection usingabook orany object otherthanthelens cover. Usethe
 lens
cover totemporarily stopprojection, butavoid projecting withthelens cover closed foralong
 period.
Thiscould damage theprojector orcause afire.
 •
Do not modify thepower cord.Donot place heavy objects ontop ofthe power cordorbend, twist,or
 pull
itexcessively. Keepthepower cordaway fromhotelectrical appliances.
 •
Ifthe lamp breaks, ventilate theroom toprevent gasescontained inthe lamp frombeing inhaled or
 coming
incontact withyour eyes ormouth. Ifyou doinhale gasesorgases comeincontact withyour
 eyes
ormouth, seekmedical adviceimmediately.
 •
Ifthe projector ismounted overhead andthelamp breaks, becareful toprevent piecesofglass from
 falling
intoyour eyes ormouth whenyouopen thelamp cover. Ifpieces ofglass doget into your eyes
 or
mouth, seekmedical adviceimmediately.
 Note:
Thelamp(s) inthis product containmercury. Pleaseconsult yourstate andlocal regulations
 regarding
disposalorrecycling. Donot putinthe trash.
 WARNING
:The cords included withthisproduct containchemicals, includinglead,known tothe State of
 California
tocause birthdefects orother reproductive harm.Wash hands afterhandling. (Thisnotice is
 provided
inaccordance withProposition 65inCal. Health &Safety Code§25249.5 andfollowing.)
 Restriction
ofUse
 Parent
topic:Notices
 159  
						

							

Restriction
ofUse
 When
thisproduct isused forapplications requiringhighreliability/safety suchastransportation devices
 related
toaviation, rail,marine, automotive; disasterprevention devices;varioussafetydevices; or
 functional/precision
devices,youshould usethisproduct onlyafter giving consideration toincluding fail-
 safes
andredundancies intoyour design tomaintain safetyandtotal system reliability.
 Because
thisproduct wasnotintended foruse inapplications requiringextremely highreliability/safety
 such
asaerospace equipment, maincommunication equipment,nuclearpowercontrol equipment, or
 medical
equipment relatedtodirect medical care,please makeyourownjudgment onthis products
 suitability
afterafull evaluation.
 Parent
topic:Important SafetyInstructions
 FCC
Compliance Statement
 For
United StatesUsers
 This
equipment hasbeen tested andfound tocomply withthelimits foraClass Bdigital device, pursuant
 to
Part 15ofthe FCC Rules. Theselimitsaredesigned toprovide reasonable protectionagainstharmful
 interference
inaresidential installation. Thisequipment generates, uses,andcanradiate radio
 frequency
energyand,ifnot installed andused inaccordance withtheinstructions, maycause harmful
 interference
toradio communications. However,thereisno guarantee thatinterference willnot occur in
 a
particular installation. Ifthis equipment doescause interference toradio andtelevision reception, which
 can
bedetermined byturning theequipment offand on,theuser isencouraged totry tocorrect the
 interference
byone ormore ofthe following measures:
 •
Reorient orrelocate thereceiving antenna.
 •
Increase theseparation betweentheequipment andreceiver.
 •
Connect theequipment intoanoutlet onacircuit different fromthattowhich thereceiver isconnected.
 •
Consult thedealer oran experienced radio/TVtechnician forhelp.
 WARNING

The
connection ofanon-shielded equipmentinterfacecabletothis equipment willinvalidate theFCC
 Certification
orDeclaration ofthis device andmay cause interference levelswhichexceed thelimits
 established
bythe FCC forthis equipment. Itis the responsibility ofthe user toobtain anduseashielded
 equipment
interfacecablewiththisdevice. Ifthis equipment hasmore thanoneinterface connector, do
 not
leave cables connected tounused interfaces. Changesormodifications notexpressly approvedby
 the
manufacturer couldvoidtheuser ’s authority tooperate theequipment.
 160