Epson Projector PowerLite 1440 User Manual

							

Parent
topic:Locking theProjector s Buttons
 Installing
aSecurity Cable
 You
caninstall twotypes ofsecurity cablesonthe projector todeter theft.
 •
Use thesecurity slotonthe projector toattach aKensington lock.Seeyour local computer or
 electronics
dealerforpurchase information.
 •
Use thesecurity cableattachment pointonthe projector toattach awire cable andsecure itto aroom
 fixture
orheavy furniture.
 Note:
Donot pass drop-prevention cablesthrough thesecurity cableattachment pointwhen mounting
 the
projector onawall orceiling.
 Parent
topic:Projector SecurityFeatures
 Related
references
 Projector
Parts-Rear
 Projector
Identification SystemforMultiple Projector Control
 You
canoperate multiple projectors usingoneremote controlformore elaborate presentations. Todo
 this,
youassign anidentification numbertoeach projector andtothe remote control. Thenyoucan
 operate
allthe projectors atonce orindividually.
 You
canalso match thecolors displayed byany projectors youplan touse near each other.
 Caution:
Leaveatleast 20inches (50cm) ofspace between theprojectors toprevent themfrom
 overheating.

91  
						

							

Setting
theProjector ID
 Setting
theRemote ControlID
 Matching
Multiple-Projector DisplayQuality
 Parent
topic:Adjusting ProjectorFeatures
 Setting
theProjector ID
 If
you want tocontrol multiple projectors fromaremote control, giveeach projector aunique ID.
 1.
Press theMenu button.
 2.
Select theExtended menuandpress Enter.
 3.
Select Projector IDand press Enter.
 4.
Use thearrow buttons onthe remote controltoselect theidentification numberyouwant touse for
 the
projector. Thenpress Enter.
 Repeat
thesestepsforallthe other projectors youwant tooperate fromoneremote control.
 Parent
topic:Projector Identification SystemforMultiple Projector Control
 Setting
theRemote ControlID
 The
remote controls IDisset tozero bydefault soitcan operate anycompatible projector.Ifyou want to
 set
the remote controltooperate onlyaparticular projector, youneed toset the remote controls IDto
 match
theprojectors ID.
 1.
Turn onthe projector youwant theremote controltooperate withexclusively.
 92 
						

							

2.
Make sureyouknow theprojectors IDnumber asset inthe Extended menuProjector IDsetting.
 3.
Aim theremote controlatthat projector.
 4.
Hold down theIDbutton onthe remote controlwhileyoupress thenumeric buttonthatmatches the
 projectors
ID.Then release thebuttons.
 5.
Press theIDbutton onthe remote controltocheck ifthe ID-setting processworked.
 You
seeamessage displayed bythe projector.
 •
Ifthe remote controlislisted asOn ,the remote controlIDisset tooperate onlythelisted projector.
 •
Ifthe remote controlislisted asOff ,the remote controlIDisnot setproperly. Repeatthesteps
 above
toset the IDtomatch theprojector youwant tocontrol.
 Note:
Youmust setthe remote controlIDtomatch theprojector IDeach timeyouturn onthe
 projector
youhave setitto control.
 Parent
topic:Projector Identification SystemforMultiple Projector Control
 Matching
Multiple-Projector DisplayQuality
 You
canmatch thedisplay qualityofmultiple projectors thatwillproject nexttoeach other.
 1.
Turn onallthe projectors onwhich youwant tomatch thedisplay quality.
 2.
SetIDnumbers oneach projector.
 3.
Make sureallthe projectors areusing thesame ColorMode setting.
 4.
Itis best tomatch twoprojectors atatime, soset the remote controlIDtomatch thefirst projector.
 93  
						

							

5.
Press theMenu button, selecttheExtended menu,andpress Enter.
 6.
Select theMulti-screen settingandpress Enter.
 7.
SettheAdjustment Levelsetting to1and press Enter.
 8.
Settheremote controlIDtomatch thesecond projector.
 9.
Access theExtended menuMulti-screen settingonthe second projector andsetthe Adjustment
 Level
setting to1.
 10.
Adjust theBrightness Correct.settingonthe projector withthedarkest displaysoitmatches the
 lighter
display, andpress Enter.(You mayneed toswitch theremote controlIDback andforth to
 make
adjustments toeach projector inall ofthese steps.)
 11.
Change theAdjustment Levelsetting to5on each projector, butthis time match thelighter display
 to
the darker one.
 12.
Adjust theBrightness Correct.settingonAdjustment Level2,3 ,and 4in the same way.
 13.
Adjust theColor Correct. settingsforgreen-to-red (G/R )and blue-to-yellow (B/Y )balance forallthe
 levels
onboth projectors inthe same way.
 14.
Ifyou need tomatch moreprojectors, repeatthesestepsmatching projector3to projector 2,4to 3,
 and
soon.
 Parent
topic:Projector Identification SystemforMultiple Projector Control
 Related
references
 Projector
SetupSettings -Extended Menu
 94 
						

							

Related
tasks
 Changing
theColor Mode
 Projecting
TwoImages Simultaneously
 You
canusethesplit screen feature tosimultaneously projecttwoimages fromdifferent imagesources
 next
toeach other. Youcancontrol thesplit screen feature usingtheremote controlorthe projector
 menus.

Note:
Whileyouusethesplit screen feature, otherprojector featuresmaynotbeavailable andsome
 settings
maybeautomatically appliedtoboth images.
 1.
Press theSplit button onthe remote control.
 The
currently selectedinputsource movestothe leftside ofthe screen.
 2.
Press theMenu button.
 You
seethisscreen:
 3.
Toselect aninput source forthe other image, selecttheSource setting,pressEnter,select the
 input
source, selectExecute ,and press Enter.(You canalso change imagesources, ifnecessary.)
 95  
						

							

4.
Toswitch theimages, selecttheSwap Screens settingandpress Enter.
 5.
Tochange theimage sizes,select theScreen Sizesetting, pressEnter,select asizing option,
 press
Enter,and press Menu toexit.
 Note:
Depending onthe video inputsignals, theimages maynotappear atthe same sizeeven ifyou
 choose
theEqual setting.
 6.
Tochoose theaudio youwant tohear, select theAudio Source setting,pressEnter,select an
 audio
option, pressEnter,and press Menu toexit.
 Note:
Select Autotohear audio fromthelargest screen orthe leftscreen.
 7.
Toexit thesplit screen feature, presstheSplit orEsc button.
 Parent
topic:Adjusting ProjectorFeatures
 Scheduling
ProjectorEvents
 You
cansave aprojector command, suchasturning theprojector onoroff orswitching inputsources, as
 an
event. Youcanschedule whenyouwant theprojector toautomatically executethecommand.
 Note:
TheTime/Schedule Protectionsettinginthe Password Protection menumustbeturned offto
 schedule
anevent.
 Saving
aScheduled Event
 Viewing
Scheduled Events
 Editing
aScheduled Event
 Parent
topic:Adjusting ProjectorFeatures
 Saving
aScheduled Event
 You
canselect projector commands youwant toperform andschedule themasan event.
 1.
Press theMenu button.
 2.
Select theExtended menuandpress Enter.
 3.
Select theSchedule Settingssettingandpress Enter.
 The
Schedule Settingsscreenappears.
 4.
Select theSchedule menuandpress Enter.
 96 
						

							

5.
Select AddNew andpress Enter.
 6.
Inthe Event Settings section,selecttheevents youwant tohave occur. (Select NoChange for
 events
thatyoudonot want tooccur.)
 7.
Inthe Date/Time Settingssection,setthe date andtime forthe scheduled eventstooccur.
 8.
When youarefinished, selectSaveandpress Enter.
 9.
Toschedule moreevents, repeattheprevious 4steps.
 10.
Select Setup complete andselect Yestosave yourchanges.
 Parent
topic:Scheduling ProjectorEvents
 Viewing
Scheduled Events
 You
canview anycurrently scheduled events.
 1.
Press theMenu button.
 2.
Select theExtended menuandpress Enter.
 3.
Select theSchedule Settingssettingandpress Enter.
 You
seeascreen likethis:
 The
colored boxesinthe calendar indicatethefollowing aboutthescheduled events:
 One-time
event
 Reoccurring
event
 Communication
ison/off
 Event
isinvalid
 97  
						

							

Parent
topic:Scheduling ProjectorEvents
 Editing
aScheduled Event
 You
caneditany currently scheduled event.
 1.
Press theMenu button.
 2.
Select theExtended menuandpress Enter.
 3.
Select theSchedule Settingssettingandpress Enter.
 You
seeascreen likethis:
 4.
Press theleftorright arrow buttons tohighlight thedate onthe calendar containing thescheduled
 event
youwant toedit.
 5.
Press theupordown arrow buttons tohighlight theevent youwant toedit, andpress Esc.
 6.
Select oneofthe following:
 •
On/Off :Enable ordisable theselected event.
 •
Edit :Edit thesettings forthe selected event.
 •
Clear :Delete theselected event.
 •
Add New:Add anew scheduled event.
 7.
When youarefinished, selectReturn andpress Enter.
 8.
Select Setup complete andselect Yestosave yourchanges.
 Note:
Todelete allscheduled events,selectSchedule Resetandselect Yes.
 Parent
topic:Scheduling ProjectorEvents
 98  
						

							

Adjusting
theMenu Settings
 Follow
theinstructions inthese sections toaccess theprojector menusystem andchange projector
 settings.

Using
theProjector s Menus
 Image
Quality Settings -Image Menu
 Input
Signal Settings -Signal Menu
 Projector
FeatureSettings -Settings Menu
 Projector
SetupSettings -Extended Menu
 Projector
NetworkSettings-Network Menu
 Projector
SetupSettings -ECO Menu
 Projector
Information Display-Info Menu
 Projector
ResetOptions -Reset Menu
 Using
theProjector s Menus
 You
canusetheprojectors menustoadjust thesettings thatcontrol howyour projector works.The
 projector
displaysthemenus onthe screen.
 1.
Press theMenu button onthe control panelorremote control.
 You
seethemenu screen displaying theImage menusettings.
 99 
						

							

2.
Press theupordown arrow button tomove through themenus listedonthe left. The settings for
 each
menu aredisplayed onthe right.
 Note:
Theavailable settingsdependonthe current inputsource.
 3.
Tochange settings inthe displayed menu,pressEnter.
 4.
Press theupordown arrow button tomove through thesettings.
 5.
Change thesettings usingthebuttons listedonthe bottom ofthe menu screens.
 6.
Toreturn allthe menu settings totheir default values, selectReset.
 7.
When youfinish changing settingsonamenu, pressEsc.
 8.
Press Menu orEsc toexit themenus.
 Parent
topic:Adjusting theMenu Settings
 Image
Quality Settings -Image Menu
 Settings
onthe Image menuletyou adjust thequality ofyour image forthe input source youarecurrently
 using.
Theavailable settingsdependonthe currently selectedinputsource.
 To
change settings foraninput source, makesurethesource isconnected andselect thatsource.
 100