Epson Projector Emp Ts10 User Manual

59
Appendices
Part Names and Functions
Front/ Top
•
•• •(Temperature) 
indicator (p.37)
Indicates abnormalities in the 
internal projector temperature.
•
•• • (Lamp) indicator 
(p.37)
Indicates a problem with the 
projection lamp or that the 
lamp needs to be replaced.
•
•• • (Operation) indicator 
(p.37)
Flashes or lights to indicate the 
operating status of the 
projector.
•
•• •Zoom ring (p.11)
Adjusts the image size.
•
•• •Focus ring (p.14)
Adjusts the image 
focus.
•
•• •Lamp cover (p.48)
Open this...

Part Names and Functions
60
Control Panel
Source
Volume Power
A/V Mute
Sync+
Tracking - Tracking +
Sync-
Menu EscHelp
Computer/YCbCrVideo
Keystone
Shift
Auto
Resize
•
•• •[Power] button (p.7)
Turns the projector power 
on and off.
•
•• •[Computer/YCbCr] 
button (p.7)
Changes the image source 
between the Computer 1 
port and the Computer 2/
Component Video port.
•
•• •[Menu] button (p.28)
Displays or hides the 
menus.
•
•• •[V-Keystone] button 
(p.13)
Press this button if the 
projected image has...

61
Appendices
Rear
Base
•
•• •Control (RS-232C) port 
Connects the projector to a computer using an 
RS-232C cable. This port is for service use, 
and should not normally be used.
•
•• •USB port (Setup Guide)
Connects the projector to a computer 
using a USB cable.
•
•• •Remote control 
light-receiving area
(
Setup Guide)
Receives signals from 
the remote control.
•
•• •Rear adjustable foot 
(p.12)
Extend and retract to adjust 
the horizontal projection 
angle. 
•
•• •S-Video port 
(
Setup Guide)
Inputs...

Part Names and Functions
62
Remote Control
Underneath cover
•
•• •Remote control light-emitting area (Setup Guide)
Outputs infrared remote control signals.
•
•• •Indicator
Lights when a remote control signal is 
being output.
•
•• •R/C switch (p.7)
Turns the remote control power on and 
off.
•
•• •[Enter] button 
(p.28, 36, 
Setup Guide)
If pressed when an environment setting 
menu or help screen is being displayed, 
the menu item is selected and the next 
menu screen appears.
If a computer is connected...

63
Appendices
Glossary
Following is an explanation of some of the terms used in this guide which may be unfamiliar or which were 
not explained in the manual itself. Further information can be obtained by referring to other commercially-
available publications.
5BNCA port used to input analog video signals.
A/V MuteThe momentary canceling of audio and video output. This projector has an [A/V Mute] 
button which you can press to momentarily stop the projection of pictures and sound. The 
picture and sound...

Glossary
64
S-VideoA video signal which has the luminance component and color component separated in order 
to provide better image quality.
It refers to images which consist of two independent signals: Y (luminance signal), and C 
(color signal).
SDTVAn abbreviation for Standard Definition Television. It refers to standard television systems 
which do not satisfy the conditions for High-Definition Television.
Security lockA device consisting of a projector case with a hole in it that a...

65
Appendices
Index
General Terms
A/V Mute function ............................................... 24, 30
About menu ................................................................ 26
Advanced menu .......................................................... 25
Air filter cleaning ....................................................... 46
Air filter replacement ................................................. 50
Appearance................................................................. 58
Aspect ratio...

Index
66
Noise reduction.......................................................... 21
No-Signal................................................................... 24
Operating temperature ............................................... 56
Operation indicator .............................................. 37, 59
Optional accessories .................................................. 53
Overheating ............................................................... 38
P in P function...

We : EPSON AMERICA, INC.
Located at  : 3840 Kilroy Airport Way
MS: 3-13
Long Beach, CA 90806
Tel : 562-290-5254
Declare under sole responsibility that the product identified herein, complies with 47CFR 
Part 2 and 15 of the FCC rules as a Class B digital device. Each product marketed, is 
identical to the representative unit tested and found to be compliant with the standards. 
Records maintained continue to reflect the equipment being produced can be expected 
to  be within the variation accepted, due...

FCC Compliance Statement
For United States Users
This equipment has been tested and found to comply with the limits for a Class B digital 
device, pursuant to Par t 15 of the FCC Rules. These limits are designed to provide 
reasonable protection against harmful interference in a residential installation. This 
equipment generates, uses, and can radiate radio frequency energy and, if not installed 
and used in accordance with the instructions, may cause harmful interference to radio or 
television...