Home > Epson > Projector > Epson Projector Emp 7100 User Manual

Epson Projector Emp 7100 User Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Epson Projector Emp 7100 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1734 Epson manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							63
    Square
    Description Draws squares on the screen.
    Execution Clicking left button once = Determines
    the starting position.
    Clicking left button twice = Determines
    the end position.
    (After the start position was settled, a
    tracker appears from the start position
    until the mouse position when moving
    the mouse.)
    Properties Color (8 colors:Light blue, Red, Green,
    Yellow, Black, Navy blue, Magenta,
    White)
    Line width (1 ~ 32 point)
    Transparent / Not transparent (opaque)
    Painting the inside of square / No
    painting
    Make oval shape / Not make
    Bar (Horizontal / Vertical Cross-lines)
    Description Draws lines horizontally and vertically.
    Execution The line is moved up/down (horizontal
    bar) and right/left (vertical bar) by
    moving the mouse. The position of the
    bar is fixed by clicking the left mouse
    button.
    Properties
    Colors (Light blue, Red, Green, Yellow,
    Black, Navy blue, Magenta, White)
    Line width (1 ~ 300 point)
    Horizontal / Vertical
    Transparent / No transparent
    Operating the projector control function 
    						
    							644  ¥  Using ELP Link II
    Stamp
    Description Marks the drawing currently set on the
    screen.
    Execution The mouse cursor is changed to the
    stamp picture set.
    Properties StampÕs variety provided by application.
    Change Cursor (Changing the mouse cursor shape)
    Description Changes the cursor to shape set.
    Execution When the ef fect button assigned is
    pressed, the cursor changes immediately
    to the mouse cursor set.
    Properties Cursor variety provided by application.
    Clear Screen
    Description Clears all functions previously executed.
    Execution Executes by pressing the effect button
    assigned.
    Properties None
    Key Macro
    Description Executes the key sequence currently set.
    Execution Executes by pressing the ef fect button
    assigned.
    Properties Key sequence 
    						
    							65
    Setting and operating the function [Key]
    When you press a key on the keyboard while the screen is active, the
    key pressed is displayed in the Edit Box. Keys are displayed in the
    order they ar e pressed.
    You may also set multikey sequences such as [Ctrl+A].
    Pressing the [Clear] button deletes the key sequence currently set.
    When you press the [Backspace] or [Delete] keys, they are added as
    any other key in the Edit Box.
    (The key sequence in the Edit Box cannot be edited.)
    The maximum number of keys in the sequence is 16.
    Operating the projector control function
    Projector Control
    When you click the projector control button, the main dialog appears
    on the screen.
    This dialog consists of five tabs: Computer, Video, Sound, Option
    and Custom.
    [Computer]
    ¥Brightness / Contrast / Sync / Tracking
    You can change the settings by using the scrollbar next to the each item.
    The changes are immediately carried out on the projector.
    The present value is displayed to the left of the scrollbar.
    Moving to the left decreases the value, scrolling to the right increases it.
    ¥ Horizontal / Vertical
    You can change the settings by using the scrollbar next to each item.
    The position of the screen moves in the direction of the arrow.
    Operating the projector control function 
    						
    							664  ¥  Using ELP Link II
    ¥You can adjust the saturation of Red / Green / Blue.
    The present value is displayed to the left of the scrollbar.
    Moving to the left decreases the value, scrolling to the right increases it.
    [Video]
    ¥Brightness / Contrast / Saturation / Tint
    You can change the settings by using the scrollbar next to each item.
    The changes are immediately car ried out on the projector.
    The present value is displayed to the left of the scrollbar.
    Moving to the left decreases the value, scrolling to the right increases it.
    ¥AUTO is usually selected.
    You can also select NTSC, PAL or SECAM.
    [Sound]
    ¥ Volume/ Tone
    You can change the settings by using the scrollbar next to each item.
    The present value is displayed to the left of the scrollbar.
    Moving to the left decreases the value, scrolling to the right increases it.
    ¥ You change the sound effect setting (for STEREO audio input only).
    Normal: Expands the sound.
    Wide: Expands the sound more than Nor mal does.
    OFF: Regular sound r eproduction.
    [Option]
    Option Setting Screen
    [Blank To]:Selects blank states for the screen.
        Black:black screen appears.
        Users logo:A logo screen appears.
    [Source Prompt]:Temporar y displays a prompt on the projector
    screen to identify which source(computer or video) is providing the
    image.
    [Install]:Selects the type of installing.
        Rear Proj:Select when you want to project the image from back of
    the screen. Flips the image right and left. 
    						
    							67
        Ceilling Mount:Select when you want to hang the projector from
    the ceiling. Flips the horizontal axis of the image, so the projector
    can be turned upside down.
    [View Change]:Selects the method how to switch the screen.
        OFF:Turns the settings off.
        Diagonally:The projected image disappears from left top to right
    bottom, and the switched image appears from the left top to right
    bottom.
        Left to Right:The projected image moves to right direction, and
    the switched image appears from left.
        Fade In:The projected image disappears from the edger of the
    screen, and the switched image appears from the edge.
    [Lamp Hours]:Displays the lamp life.
    [Reset]:Resets all settings to the default values.
    [Pattern Display]:Displays the test pattern currently selected.
    [Close]:Closes the projector control screen.
    [Help]: Explains function and the terminology.
    [Custom]
    Customize Function: You can assign the following functions to the
    custom buttons (effects 1 to 5) on the remote control supplied with
    the projector.
    [Zoom]: Zooms the screen image.
    [Preview]: Displays all input images on the screen in separate
    windows.
    [Strobe]: Displays a screen for specification of the number of
    frames and the time inter val.
    [Reset]: Returns all settings in each of the tabs to the defaults.
    [Close]: Exits the projector control screen.
    [Help]: Explains functionality and terminology.
    Operating the projector control function 
    						
    							684  ¥  Using ELP Link II
    Test Pattern Setting
    You can adjust the image which will be projected on the screen by
    using the sample image. Select [Color Image], [Gray Scale], [Focus
    Pattern] or [User File] if you need to adjust them.
    If you want to use a user setting file, enter a filename directly or press
    the [Refer] button and select a file from the file folder.
    The user setting file is the bitmap file (*.bmp) which the user created
    using a graphical application. The size of the image in the user setting
    file should be 1024 ´ 768 pixels.
    User Logo Setting
    The user logo is the screen image displayed for the blank screen.
    User logo memor y consists of file read, user logo range setting,
    designating background color, file write and downloading to the
    projector.
    Initial Screen for the User Logo Setting
    When you select the user logo memory function, the initial screen is
    displayed.
    In this screen, you can display the projected image of the user logo,
    download it and save it in a file.
    Image Display: Displays the projected image from the projector on
    the computer screen, and displays the user logo you have made on
    the same screen. 
    						
    							69
    Logo Data
    [Edit User Logo]:
    Switches to the logo data edit screen.
    [Download]: Writes the present user logo data to the projector.
    [Save User Logo]:
    Saves the present user logo image in a file.
    [Zoom]: Through the projector, the zoom rate may be specified
    for displaying the user logo.
    You can select the zoom rate from 100%, 150%, 200%,
    250% or 300%.
    [Close]: Closes the user logo setting screen and retur ns to the
    projector setting screen.
    [Help]: Explains functions and terminology.
    Edit User Logo Screen
    When you click the [Edit] button on the user logo setting screen, the
    main screen appears.
    The user logo edit screen consists of reading a specified bitmap file
    into the user logo, the range specified and background color.
    [File]: Reads the bitmap file or present user logo data.
    [Edit]:
    [Area Specify]:
    Cuts the logo data you want to display.
    Drag to select the area you want to cut.
    [OK]: Closes the user logo edit screen and returns to the user
    logo setting scr een.
    [Cancel]: Cancels the editing you have carried out and returns to
    the user logo setting screen.
    [Help]: Explains functions and terminology.
    Operating the projector control function 
    						
    							704  ¥  Using ELP Link II
    Color Property Setting
    [Color Temp]
    Adjusts the white color of the screen. H represents Òcold whiteÓ, M is
    ÒnormalÓ and L is Òwarm whiteÓ. The user can also adjust each Red,
    Green and Blue color by selecting the User Color.
    [Gamma]
    Selects the image proper ty.
    [Pattern Display]
    Displays the pattern data currently selected.
    [Close]
    Closes the user logo setting screen and retur ns to the projector
    setting screen.
    [Help]
    Explains functions and terminology. 
    						
    							71
    5
    Maintenance
    The projector needs little maintenance. You should keep the lens
    clean  because any dirt or stains will appear on the screen. You will
    also need to clean the air filter located at the bottom of the
    projector periodically. It is important to keep the air filter clean
    because a clogged air filter prevents proper ventilation which is
    necessar y to cool the projector and prevent it from overheating.
    The only par ts you should replace yourself are the lamp and the air
    filter. If any other parts need r eplacing, contact your EMP-7100/
    5100 dealer or qualified ser vice personnel.
    When cleaning any part of the projector, always switch off and
    unplug the projector first.
    u
      Warning: Never open any of the covers on the projector except the
    lamp and filter covers. Dangerous electrical voltages inside the
    projector can cause severe injury. Except as specifically indicated in
    this OwnerÕs Manual, do not attempt to service this product
    yourself. Refer all ser vicing to qualified service personnel. 
    						
    							725 ¥ Maintenance
    Cleaning the Lens
    Clean the lens whenever you notice dirt or dust on the surface. Wipe
    the lens surface gently with a soft, dry, lint-free cloth.
    To remove dirt or stains on the lens, moisten a soft cloth with water
    and a neutral detergent and gently wipe the lens surface.
    Cleaning the Projector Case
    To clean the projector case, first unplug the power cable. To remove
    dirt or dust, wipe the casing with a soft, dry, lint-fr ee cloth. To
    remove stubborn dirt or stains, moisten a soft cloth with water and a
    neutral detergent. Then wipe the casing.
    Do not use alcohol, benzene, thinners or other chemical detergents
    as these can cause the casing to warp.
    Cleaning the Air Filter
    The air filter, which is located at the bottom of the projector, should
    be cleaned after every 100 hours of use. If it is not cleaned periodi-
    cally, it can become clogged with dust and prevent the projector from
    being ventilated properly. This can cause overheating and damage the
    projector. 
    						
    All Epson manuals Comments (0)

    Related Manuals for Epson Projector Emp 7100 User Manual