Home > Epson > Projector > Epson Projector Emp 7100 User Manual

Epson Projector Emp 7100 User Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Epson Projector Emp 7100 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1734 Epson manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							43Changing Menu Settings
    8. [Presently Selected] will appear right next to the function you
    want to customize instead of [Select]. (If the function has been
    selected already, [Presently Selected] appears.)
    9. You are now finished.
    *If you want to change the function you customized, perform the
    above steps 1 to 8 again.
    Using the functions:
    * The [Volume], [Mute] and [Freeze] buttons are always available,
    even when you have customized the above functions. However, if you
    press any other button, its function has priority over the other
    buttons and the customized function is cancelled.
    * If ÒNo SignalÓ appears on the screen or no suppor ted signal is
    being entered, no function will work.
    Zoom
    1. Press the [Custom] button on the remote control. (Switches to
    zoom display mode.)
    2. Enlarges the displayed image +1.25 times each time the [Left
    Click] button on the remote control is pressed. (An image can be
    enlarged up to four times.)
    3.
    Reduces it +0.75 times each time the [Right Click] button on the
    remote control is pressed. (An image can be reduced up to one time.)
    4. If an enlarged image falls partly outside of the display area, it can
    be moved horizontally or vertically to adjust its position by using
    the [Pointer] on the remote control.
    5. The Zoom function is cancelled by pressing the [Custom] button
    on the remote control. (The image returns to previous size.)
    Preview
    1. Press the [Custom] button on the remote control.
    2. The screen turns to black. (This lasts approx. 4 seconds.) 
    						
    							443 ¥ Using the Menus
    3. The screen is divided into four quadrants, each of which shows
    the projection images currently being entered by each of the
    input sources.
    4. The projection image is switched each time the [Right Click]
    button on the remote control is pressed. (Each input source
    name flashes on the screen.)
    5. The Preview function is closed by pressing the [Left Click]
    button on the remote control. Next the image you selected in
    step 4 will be displayed on the screen.
    6. The Preview function is cancelled by pressing the [Custom]
    button on the remote control. (The screen will revert to the
    image shown before the Preview function was used.)
    Strobe
    1. Press the [Custom] button on the remote control.
    2. The subdivided image you selected is projected on the screen at
    the top left. 
    						
    							45
    3. Press the [Left click] button on the remote control once.
    4. The Strobe display is started. (If you set the number of frames to
    9, they are displayed in the order of 1 to 9.)
    5. By pressing the [Left click] button on the remote control again,
    you can go back to the step 2.
    6. The Strobe function is cancelled by pressing the [Custom] button
    on the remote control. (The screen will revert to the image
    shown before the Preview function was used.)
    To change the number of frames and the time interval:
    1. Press the [Right click] button on the remote control once.
    2. The Strobe setting menu appears.
    3. Set the number of frames and time interval by using the Pointer
    button on the remote control.
    4. Press the [Right click] button on the remote control again.
    5. The Strobe setting menu is closed.
    Changing Menu Settings 
    						
    							463 ¥ Using the Menus
    Counts of frames, Time
    Pressing the remote controlÕs Click 1 button while strobe display is
    being performed displays a screen for specification of the counts
    frames and the time interval. You can set the frame count to 4, 9 or
    16, and the time interval from 0.1 to 1 second in 0.1 second incre-
    ments.
    Press the remote controlÕs Click 2 button again to clear the setting
    screen.
    RESET ALL
    Executing this command resets the settings in all menus to their
    factor y defaults.
    Select this item and then press a Click button or the  button
    to display the confirmation screen.
    Next, select Yes and then press a Click button or the  button
    to reset all menu items.
    If you change your mind, select No and then press a Click button or
    the  button to clear the confirmation screen without chang-
    ing any settings. 
    						
    							47
    4
    Using ELP Link II 
    						
    							484  ¥  Using ELP Link II
    Introduction
    To use the ELP Link II software, you need one of the following
    operational environments.
           Windows Ver. 3.1 (English)
           Windows 95 (English)
           MacOS System (from ver. 7)
    This instruction manual tells you how to use ELP Link II.
    The application ELP Link II supports two functions related to the
    projector.
    One is the projector control function which enables you to control
    the projector (screen display, sound, etc.) from a computer and to
    manipulate the settings (user logo setting, etc.) which the projector
    cannot control.
    The other function is the presentation support function which
    enables you to control the presentation application (PowerPoint, etc.)
    through a remote control and to perform the real-time presentation
    effectively (adding lines, underlining or a stamp, etc. on the slide
    screen during your presentation). 
    						
    							49
    How to connect
    ¥For IBM PCs and IBM compatible PCs (Windows)
    Please refer to the section ÒConnecting to a computerÓ in this
    manual (pages 7~14).
    ¥For Macintosh
    Please refer to the section ÒConnecting to a computerÓ in this
    manual (pages 7~14).
    How to connect 
    						
    							504  ¥  Using ELP Link II
    How to install
    For IBM PCs and IBM compatible PCs (Windows)
    Start Windows.
    Insert the floppy disk with the ELP Link II software into floppy disk
    drive [A]. (It is assumed your floppy disk drive is drive A.)
    The ELP Link II software to be installed depends on the computer
    you are installing it on.
    Select the Run command from the File menu in the Program
    Manager. The Run dialog box appears on the screen.
    Type [A: SETUP.EXE] in the [Command Line] box and click the
    [OK] button.
    The drive letter [A] must designate the proper drive (the floppy disk
    drive into which you inserted the disk with the ELP Link II soft-
    ware).
    The ELP Link II set-up window will be displayed after a while.
    Follow the instructions on the scr een to complete the installation.
    When the termination screen appears, click the [OK] button to finish
    the installation.
    ¥If you use the software often, place it in the Startup program
    group. This is ver y convenient.
    ¥Please refer to your Windows Instruction Manual. 
    						
    							51
    For Macintosh
    Insert the floppy disk with the ELP Link II software into the floppy
    disk drive. The ELP Link II folder appears on the screen. Double-
    click the folder, then an ELP Link II icon will appear.
    Copy the icon to a local hard disk with a drag-and-drop action.
    To be able to use ELP Link II, restart the system.
    ¥When you install the ELP Link II software, make a new folder and
    designate the disk drive to be used.
    ¥Please refer to your Macintosh Instruction Manual.
    How to install 
    						
    							524  ¥  Using ELP Link II
    Starting and exiting ELP Link II
    ¥To start ELP Link II
    Double-click the ELP Link II icon to start the application. First an
    opening screen appears, then the main ELP Link II window will
    appear with a reduced size.
    ¥For Windows 3.1
    Double-click the minimized ELP Link II window.
    ¥For Windows 95
    Click the ELP Link II button on the taskbar.
    ¥For Macintosh
    Open the local hard disk that you copied the ELP Link II.
    When double-click the ELP Link II folder, ELP Link II icon
    appears on the screen.Double-click the icon, then the main
    ELP Link II window will appear.
    If the ELP Link II window is hidden behind another window,
    select ELP Link II from the application menu.
    This will bring the ELP Link II window to the front.
    ¥To exit ELP Link II
    Click the close button or select [End] from the Menu to exit the
    application.
    If the projectorÕs setting screen is open, you cannot exit ELP Link II.
    First close the setting screen, then exit ELP Link II. 
    						
    All Epson manuals Comments (0)

    Related Manuals for Epson Projector Emp 7100 User Manual