Home > Epson > Projector > Epson Projector Emp 7100 User Manual

Epson Projector Emp 7100 User Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Epson Projector Emp 7100 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1734 Epson manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							23
    AUTO Button
    If you are using image input from a computer, you can press the
    AUTO button after fitting the image to the screen. Pressing AUTO
    automatically adjusts the computer input signal to the current
    projector settings.*
    * Press the AUTO button while the image fills the entire screen of
    your computer, like a Windows screen. Cer tain computer input
    signals may not be totally compatible with AUTO button settings.
    In such cases, use the menus to make additional adjustments.
    Resize Button
    The Resize button allows you to select the projection screen mode
    for certain types of image input signals from a computer.
    With computer images up to XGA (1,024 x 768 pixles) size for EMP-
    7100 and SVGA (800 x 600 pixels) size for EMP-5100, and with
    video images as well, you can either select to display the area in the
    centre of the projected image (W indow display) or to display of the
    entire projected image (Resize display).
    With images larger than XGA (1,024 x 768 pixels) size for EMP-
    7100 and SVGA (800 x 600 pixels) size for EMP-5100, you can
    either select to display a portion of the projected image (Window
    display) or to display the entire projected image (Resize display).
    The Resize button cannot be used with XGA (1,024 x 768 pixels) for
    EMP-7100 and SVGA (800 x 600 pixels) for EMP-5100.
    AUTO Button 
    						
    							242 ¥ Using the Projector
    Controlling the Projector
    Normally you control the projector using the remote control. The
    buttons on the remote control allow you to do the following:
    ¥ Switch power on and off.
    ¥ Auto-set-up of the computer image screen.
    ¥ Switch between input images (Computer 1, Computer 2, video-
    computer).
    ¥ Access menu for adjustment of image, audio, video, and display
    settings.
    ¥ Control resizing.
    ¥ Control display freeze.
    ¥ Control display blanking.
    ¥ Adjust and mute audio output.
    ¥ Control custom functions.
    ¥ Move the pointer.
    When using the remote control, always point it towards the remote
    control receivers located at the front and at the back of the projector. 
    						
    							25
    The functions of the remote control buttons are summarized on page
    27.
    To be able to use the remote control as a cordless mouse connect the
    projector to your computer with the cables came with the ELP
    Communication Kit II .
    To use the remote control, always point it towards the remote
    control receivers located at the front of the projector.
    You can use the remote control up to 10 metres (33 feet) from the
    projector.
    In addition to the remote control, you can also control the projector
    by using the buttons on the projectorÕs operation panel located on
    top of the projector.
    Controlling the Projector 
    						
    							262 ¥ Using the Projector
    Remote control
    Operation Panel
    Click 2
    Click 1 Pointer 
    						
    							27Controlling the Projector
    Remote Control
    Button/controller Function
    Menu Displays or closes the menu.
    AutoAutomatically adjusts the graphic signal being
    sent from a computer to optimize it for projection.
    Video Switches from computer to video.
    Computer Switches between Computer 1 and Computer 2,
    and from video to computer.
    Effects 1 ~ 5 Function buttons for add-on functions which can
    be assigned using the ELP Link II software that
    comes with the projector.
    Pointer Moves the computer Õs pointer when the projector
    is connected to the computer with all cables that
    came with the ELP Communication Kit II.
    Click 1 Emulates clicking of the right mouse button.
    During menu selection, emulates the (Enter)
    operation panel button.
    Blank Switches to black display or user logo display.
    Resize Switches the display dot mode and resize mode
    (EMP-7100 : for VGA, SVGA and SXGA input
    EMP-5100 : for VGA and XGA input).
    Custom Button for the custom function assigned using the
    ELP Link II software that comes with the projector.
    FreezeSwitches to the display freeze state.
    Mute Cuts off audio.
    Volume ±Adjusts the volume level.
    Power Turns power on and off.
    Click 2 Emulates clicking of the left mouse button. During
    menu selection, emulates the (Enter) operation
    panel button. 
    						
    							282 ¥ Using the Projector
    Operation Panel
    Button/controller Function
    Power Turns power on and off.
    Menu Displays or closes the menu.
    Video Switches from computer to video.
    Computer Switches between Computer 1 and Computer 2,
    and from video to computer.
    AutoAutomatically adjusts the graphic signal being
    sent from a computer to optimize it for projection.
    Resize Switches the display dot mode and resize mode
    (EMP-7100 : for VGA, SVGA and SXGA input
    EMP-5100 : for VGA and XGA input).
    Volume ±Adjusts the volume level.
    Mute Cuts off audio.
    /(Sync+/SyncÐ)
    Synchronizes the graphic signal being sent from a
    computer.
    Use these buttons to make adjustments whenever
    the overall image is fuzzy or streaked.
    These buttons are also used during menu
    operations to select menu items.
    /(trackingÐ/tracking+)
    Matches the projectorÕs internal clock to various
    computer graphic signals (tracking adjustment).
    Use these buttons to make adjustments whenever
    there are vertical fuzzy lines in the image.
    These buttons are also used during menu
    operations to change numeric settings.
    (Enter) key 
    Registers a menu selection. 
    						
    							29
    Checking the Status of the Projector
    The projector is equipped with an operation indicator and a projec-
    tion lamp indicator. These indicate the current status of the projector
    at a glance.
    Note that a red indicator is warning you of a serious problem. See
    page 82 for details on what action is required when a red indicator
    lights up or flashes.
     
    Operation Indicator
    Colour Status Meaning
    Orange Lit Sleep mode
    Green Lit Projection lamp is lit and projector is projecting.
    Orange Flashing The projector is hot.
    Red Flashing Internal projector problem
    Red Lit The projector is too hot and turned off.operation indicator projection lamp indicator
    Checking the Status of the Projector 
    						
    							302 ¥ Using the Projector
    Projection Lamp Indicator
    Colour Status Meaning
    Off Projection lamp is off.
    Green Lit Projection lamp is lit.
    Green Flashing The projector is warming up.
    Orange Flashing Projection lamp is reaching the end of its life and
    and Red alternately should be replaced with a new one.
    Orange Flashing The projector is cooling.
    Red Lit Projection lamp has reached the end of its life
    and will no longer project images. Replace the
    projection lamp with a new one.
    Red Flashing Projection lamp or lamp power supply problem. 
    						
    							31
    Using the Menus
    The projector menus allow you to do the following:
    ¥Adjust the brightness, contrast, synchronization, tracking, vertical and
    horizontal alignment, and color balance of the computer screen, and
    mouse/serial locking (Computer Menu)
    ¥Adjust the brightness, contrast, color saturation, tint, and signal system
    of the video screen (Video Menu)
    ¥Adjust the volume level, tone setting, and Spatializer (Audio Menu)
    ¥Select color temperature, rear projection, ceiling mount, screen blank-
    ing, screen switching effect and menu language (Option Menu)
    ¥Assign functions to the remote controlÕs Custom button (Custom
    Menu)
    ¥Return all settings to their factory defaults (Reset All Menu)
    3 
    						
    							323 ¥ Using the Menus
    Accessing the Menus
    Press the Menu button to display the main menu on the screen. Press
    the Menu button again to close the menu. The currently selected
    menu item is highlighted on the screen. 
    						
    All Epson manuals Comments (0)

    Related Manuals for Epson Projector Emp 7100 User Manual