Home > Epson > Projector > Epson Projector Emp 7100 User Manual

Epson Projector Emp 7100 User Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Epson Projector Emp 7100 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1734 Epson manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							33
    Changing Menu Settings
    Use the remote controlÕs pointing button to select the menu you
    want and then press the Click 1 or Click 2 button to display the
    submenu.
    You can also select a menu using the operation panelÕs the  and
      buttons and then pressing the  button to display
    the submenu.
    You cannot select video submenus when the input source is a
    computer, or computer submenus when the input source is video.
    Changing Menu Settings 
    						
    							343 ¥ Using the Menus
    When a submenu is displayed on the screen, use the pointing button
    or the  and  button to select the menu item you want.
    Next, use the pointing button or the  and  buttons to
    make adjustments to the settings of the item.
    To return to the main menu from the submenu, select the Return
    item in the submenu and then press a Click button or the 
    button.
    You may also close the menu by pressing the Menu button.
    The following describes the items you may set in the submenus. 
    						
    							35
    Video Menu (Computer)
    With the Computer Menu allows you to may adjust settings related
    to computer video signals and the wireless mouse.
    POSITION
    Select this item and then press a Click button or the  button
    to enter the screen position adjustment mode. While in the screen
    position adjustment mode, use the pointing button or the ,
    ,  and  buttons to move the screen position in
    the corresponding direction.
    After you are finished, press a Click button or the  button to
    retur n to the Computer Menu.
    TRACKING
    Matches the projectorÕs internal clock to various computer graphic
    signals. Adjust this setting to remove vertical fuzzy lines from the
    image.
    SYNC
    Synchronizes with the tracking signal sent from the computer. Adjust
    this setting whenever the overall image is fuzzy or to remove streaks
    from the image.
    BRIGHTNESS
    Lightens or darkens the overall image. Increase brightness to make
    the image lighter, or decrease it to make the image darker.
    CONTRAST
    Adjusts the relative difference between light and dark areas. Increase
    contrast to make light areas lighter and dark areas darker, or decrease
    it to lessen the difference between the light areas and dark areas of
    the image.
    Changing Menu Settings 
    						
    							363 ¥ Using the Menus
    COLOR
    Adjusts the color balance of the input source.
    Select this item and then press a Click button or the  button
    to enter the color adjustment mode. While in the color adjustment
    mode, use the pointing button or the  and  button to
    select a color. Next, use the pointing button or  and 
    buttons to adjust the selected color. Increasing a colorÕs setting makes
    that color more intense on the screen, while a lower setting makes the
    color less intense.
    After you are finished, press a Click button or the  button to
    retur n to the Computer Menu.
    MOUSE/COM
    Locks and unlocks the Mouse/Com port.
    Selecting 1 locks wireless mouse control to the computer connected
    to the Mouse/Com 1 port. Even if the input source is switched to
    Computer 2, the wireless mouse controls the computer connected to
    Mouse/Com 1 only.
    Selecting 2 locks wireless mouse control to the computer connected
    to the Mouse/Com 2 port.
    Selecting 1«2 tells the projector to automatically switch wireless
    mouse control whenever the input source computer is changed.
    RESET
    Returns all Computer Menu items to their factor y defaults.
    Select this item and then press a Click button or the  button
    to display the confirmation screen.
    Next, select Yes and then press a Click button or the  button
    to reset the Computer Menu items. 
    						
    							37
    If you change your mind, select No and then press a Click button or
    the  button to clear the confirmation screen without chang-
    ing any settings.
    Video Menu (Video)
    The Video Menu allows you to make adjustments related to video
    signals from video equipment.
    BRIGHTNESS
    Lightens or darkens the overall image. Increase brightness to make
    the image lighter, or decrease it to make the image darker.
    CONTRAST
    Adjusts the relative difference between light and dark areas. Increase
    contrast to make light areas lighter and dark areas darker, or decrease
    it to lessen the difference between the light areas and dark areas of
    the image.
    SATURATION
    Adjusts color density. Increase color density to make colors darker
    and more opaque, or decrease it to make colors lighter and less
    opaque.
    TINT (NTSC only)
    Adjust the red-green balance of the screen. Increase tint to add more
    green, or decrease it to add more red.
    MODE
    Specifies the video signal system. Normally this signal system setting
    should be left at AUTO for automatic detection of the video signal
    system. If automatic selection is not possible for some reason, use this
    menu to manually specify NTSC, PAL or SECAM .
    Changing Menu Settings 
    						
    							383 ¥ Using the Menus
    VIDEO RESET
    Returns all Video Menu items to their factor y defaults.
    Select this item and then press a Click button or the  button
    to display the confirmation screen.
    Next, select Yes and then press a Click button or the  button
    to reset the Video Menu items.
    If you change your mind, select No and then press a Click button or
    the  button to clear the confirmation screen without chang-
    ing any settings.
    Audio Menu
    The Audio Menu allows you to make adjustments related to audio.
    VOLUME
    Adjusts the volume level for the speakers and audio-out terminal.
    Increase the audio volume to raise the volume, or decrease it to lower
    the volume.
    TONE
    Adjusts the tone of the speakers and audio-out terminal. Increase the
    tone to raise the treble, or decrease it to raise the bass.
    SPATIALIZER
    Adjusts audio effects provided by the Spatializer.
    Off: Normal sound for stereo input.
    Normal: Expansive sound for stereo input.
    Wide: More expansive sound for stereo input. 
    						
    							39
    SOUND RESET
    Returns all Audio Menu items to their factory defaults.
    Select this item and then press a Click button or the  button
    to display the confirmation screen.
    Next, select Yes and then press a Click button or the  button
    to reset the Audio Menu items.
    If you change your mind, select No and then press a Click button or
    the  button to clear the confirmation screen without chang-
    ing any settings.
    Option Menu
    The Option Menu allows you to create basic settings that normally
    do not need changing.
    PROMPT
    Temporarily displays a prompt on the projector screen to identify
    which source (computer or video) is providing the image.
    COLOR TEMP.
    Adjusts the whiteness of the screen. The H setting provides a cold
    white, M standard white, and L a warm white.
    Selecting the User item and pressing a Click button or the 
    button displays a screen for more precise color temperature setting.
    Use the pointing button or the  and  buttons to select
    the color you want to adjust, and then use the pointing button of the
     and  buttons to change the selected value. A high
    color temperature value enhances the selected color within the overall
    image, while a lower value weakens the color.
    Changing Menu Settings 
    						
    							403 ¥ Using the Menus
    Press a Click button or the  button to clear the setting screen
    and retur n to the Option Menu.
    REAR PROJ.
    Mirrors the projected images horizontally (left-right). Selecting ON
    turns mirroring on, while OFF turns it of f (for a normal image). Turn
    this option on when projecting from behind onto a transparent
    screen being viewed from the opposite side.
    CEILING
    Mirrors the projected images vertically (top-bottom) and horizontally
    (left-right). Selecting ON turns mir roring on, while OFF turns it of f
    (for a normal image). Turn this option on when hanging the projec-
    tor upside-down from the ceiling.
    BLANK
    Selects what should be projected when the projectorÕs Blank button is
    pressed to blank the screen. You can select either a black screen or a
    user logo. A user logo can be created using the ELP Link II software
    that comes with the projector.
    VIEW CHANGE
    Specifies the view change to use when the input source is changed.
    OFF: No visual effects, simply cut to new source.
    Diagonal: Original source screen shrinks from upper left to lower
    right, and new source screen expands from upper left to lower
    right.
    Left ® Right: Original source screen shrinks from left to right, and
    new source screen expands from left to right.
    Fade: Original source screen shrinks from outside in, and new source
    screen expands from inside out. 
    						
    							41
    LANGUAGE
    Selects the menu language in the sequence: Japanese, English,
    German, French, Italian, Spanish and Portuguese.
    LAMP
    Displays the number of hours the current projector lamp has been
    used. The color of this display turns r ed when the projector lamp is
    near the end of its normal life. When this happens, replace the
    projector lamp with a new one as soon as possible.
    Changing Menu Settings 
    						
    							423 ¥ Using the Menus
    Using Custom Functions
    You can use the Custom Menu to assign the Zoom, Preview or
    Strobe function to the remote controlÕs Custom button.
    You can assign the following functions:
    1. Zoom
    Zooms in or out on the center of the displayed image.
    2. Preview
    Displays the projection images currently being entered by each of
    the input sources. The screen is divided into four quadrants.
    3. Strobe
    Displays images on the screen in sequence. You can preset the
    number of images to be displayed and the amount of time each
    image is displayed.
    To customize the functions:
    1. Press the [Menu] button on the projector or remote control.
    2. The main menu appears.
    3. Select [Custom] by using the Sync+/Ð buttons on the projector
    or the Pointer on the remote control.
    4. Press [
     (Enter)] or the Left/Right Click buttons on the
    remote control to call the Custom menu.
    5. The Custom menu appears.
    6. Select the function you want to assign to the [Custom] button on
    the remote control.
    7. Press [
     (Enter)] or the Left/Right Click buttons on the
    remote control to enter your selection. 
    						
    All Epson manuals Comments (0)

    Related Manuals for Epson Projector Emp 7100 User Manual