Epson Projector Emp 62 User Manual

36
List of FunctionsSettings Menu
Sub-menu
Function
Keystone
Corrects vertical keystone distortion in images. sp.i
Auto 
Keystone 
(EMP-82/62 
only)
Sets the function for automatically detecting the projector angle and correcting keystone On or Off when the projector is tilted vertically.
This function is only enabled when the Projection command in the Extended menu is set to Front. If it is set to something other than 
Front, this menu cannot be selected.
Operation 
Lock
When set to On, the operation of...

37
List of FunctionsExtended Menu
Sub-menu
Function
Display
This lets you make settings related to the projectors display.
Message:
Sets whether the input source name or colour mode name or a message is displayed on the screen (On) or not displayed (Off) at times such 
as when the input source or colour mode is changed or when no image signals are being input.
Display Background:
Sets the screen status to Black, Blue, or Logo when no image signals are being input.
Startup Screen:
The startup screen (the...

38
List of FunctionsOperation
Direct Power On:Sets whether direct power on is enabled (On) or disabled (Off).
When you set to On and leave the power cable connected to a wall socket, be aware of that sudden surges of electricity that m ay occur when 
power comes back on after a power outage may cause the projector to turn on automatically.
Sleep Mode: Sets whether projection stops automatically (On) or not (Off) when no operations are carried out for approximately 30 minut es while no 
image signals are...

39
List of FunctionsInfo Menu
Lets you check the status of the image signals being projected and the status of the projector. (Display only)Sub-menu
Function
Lamp Hours
Shows the cumulative lamp operating time.
If it reaches the lamp warning time, the characters are displayed in yellow. The cumulative operating time from 0 to 10 hours will be displayed as 
0H. From 10H onwards, the display will be in units of 1 hour.
Source
Displays the input source which is currently being projected.
Input Signal...

40
List of FunctionsReset Menu
Sub-menu
Function
Reset All
Resets all items in all menus to their default settings.
The Computer Input, Computer1 Input, Computer2 Input, User’s Logo, Lamp Hours and Language settings will not be reset to their 
defaults.
Reset Lamp 
Hours
Clear the cumulative lamp operating time and reset to 0H. Perform this procedure when you replace the lamp. 

TroubleshootingThis chapter describes how to identify problems and what to do if a problem is found.Using the Help ..................................................... 42
Problems Solving................................................ 44
 Reading the Indicators........................................................ 44 Power indicator lights red .......................................................... 44
 Lamp or Temp indicator flashes orange .................................... 45 When the...

42
Using the HelpIf a problem occurs with the projector, the Help function uses on-screen 
displays to assist you in solving the problem. It uses a series of menus in a 
question and answer format.
PROCEDUREA
Display the Help menu.
B
Select a menu item.
C
Confirm the selection.
Using the control panel
Using the remote control
Using the control panel
Using the remote controlUsing the control panel
Using the remote control 

43
Using the HelpD
Repeat the operations in steps 2 and 3 to proceed 
through the menu to more detailed items.
E
Press the [Help] button to exit the help menu.
If the Help function does not provide a solution to the 
problem, refer to Problem Solving sp.44  

44
Problems SolvingIf you are having a problem with the projector, first check the projectors indicators and refer to Reading the Indicators below.
If the indicators do not show clearly what the problem might be, refer to When the Indicators Provide No Help. sp.47Reading the Indicators
The projector is provided with the following three indicators which indicate the operating status of the projector.
The following tables show what the indicators mean and how to remedy problems that they indicate.
If all...

45
Problems Solving
High temperature error
(overheating)
The lamp will turn off automatically and projection will stop. Wait for about 5 minutes. After 
about 5 minutes the projector will switch to standby mode, so check the following two points. 
After checking, press the [Power] button to turn the power back on.
 Check that the air filter and air exhaust vent are clear, and that the projector is not positioned 
against a wall.
 If the air filters are blocked, clean or replace them. sp.57, p.63If this...