Epson Projector Emp 62 User Manual

6
Part Names and FunctionsFront/Top•Control panel sp.7
•Remote control light-receiving 
area sp.iReceives signals from the remote control.
•Front adjustable foot
sp.iiiExtend and retract to adjust the projection 
angle when the projector is placed on a 
surface such as a shelf.
•Lens coverAttach when not using the projector to 
prevent the lens from becoming dirty or 
damaged.•Focus ring sp.iiiAdjusts the image focus.
•Foot adjust lever
sp.iiiPull out the foot lever to extend and 
retract the front...

7
Part Names and FunctionsControl Panel•[Power] button sp.iiiTurns the projector power on or off.
•[Help] button sp.42Displays and closes the help, which shows 
solutions if a problem occurs.
•[Menu] button sp.32Displays and closes the configuration 
menu.
•[Esc] button sp.32Stops the current function.
Displays the previous 
screen or menu while 
viewing a configuration 
menu. 
•[Source Search] button sp.18The input source is automatically searched for in the 
following order, and the input image from...

8
Part Names and FunctionsRear (EMP-X3)
•Remote control light-receiving 
area sp.iReceives signals from the remote control.
•Power inlet sp.iiiConnects to the power cable.•Computer port sp.iInputs analogue RGB video signals from a 
computer and RGB video signals and 
component video
g signals from other video 
sources.
•Video port 
sp.iiInputs composite video
g signals to 
the projector from 
other video sources.
•S-Video port 
sp.iiInputs S-Video
g 
signals to the 
projector from other 
video sources....

9
Part Names and FunctionsRear (EMP-82/62)
•Remote control 
light-receiving area sp.iReceives signals from the remote 
control.
•Power inlet sp.iiiConnects to the power cable.
•Computer2 port sp.iiInputs analogue RGB video signals 
from a computer and RGB video 
signals and component video
g 
signals from other video sources.
•Video port sp.iiInputs composite video
g signals to the projector from 
other video sources.
•S-Video port sp.iiInputs S-Video
g signals to the projector from other 
video...

10
Part Names and FunctionsBase
•Air filter (air intake vent) 
 sp.57, p.63This prevents dust and other foreign particles 
from getting inside the projector when air is 
drawn in. It should be cleaned and replaced 
periodically.
•Suspension bracket fixing points (3 points) sp.56, p.67Attach the optional ceiling mount here when suspending the projector from a ceiling.
•Front adjustable foot
•Lens cover string attaching stayRemove this when suspending the projector 
from a ceiling.
•Foot adjust lever
•Air...

11
Part Names and FunctionsRemote Control
The following explains the functions shown in the illustration of the EMP-82/62 remote control.
If you position the   over the button icon or button name, a description of that button will appear.•[Video] button sp.18•[S-Video] button  sp.18
•Numeric buttons  sp.26•Remote control light-emitting area  sp.i
•[A/V Mute] button  sp.20•[E-Zoom] button ( ) ( )  sp.22•[Enter] button  sp.24 , p.32•[Esc] button  sp.24 , p.32•[Auto] button  sp.13
•[Menu] button...

Adjusting and changing the imageThis chapter explains how to adjust the quality of the image, the volume, the colour mode selection and so on, and also how to change the image.Adjusting the Image Quality .............................. 13
 Adjusting Computer Images and RGB Video Images .....13 Automatic Setup ........................................................................ 13
 Adjusting the Tracking .............................................................. 13
 Adjusting the...

13
Adjusting the Image QualityAdjusting Computer Images and RGB Video Images
Automatic setup detects analogue RGB signals coming from a connected 
computer, and automatically adjusts these signals so that the optimum 
images can be obtained.
Automatic setup involves adjustment of the following three items:
Tracking
g, Position and Sync (synchronisation)
g.
If Auto Setup in the Signal menu is set to Off, automatic setup is not 
carried out. In this case, press the [Auto] button on the remote control or...

14
Adjusting the Image QualityB
Adjust the tracking until the vertical stripes disappear 
from the image. 
The tracking value increases or decreases each time a button is 
pressed.
C
Press the [Menu] button to exit the configuration 
menu.
If flickering, fuzziness or interference appear in 
computer or RGB video images, and this cannot 
be fixed using automatic setup, you will need to 
adjust the Sync (synchronisation)
g manually 
using the following procedure.
PROCEDUREA
Select Signal from the...

15
Adjusting the Image QualityB
Adjust the synchronization until the horizontal noise 
disappears from the image.
The sync value increases or decreases each time a button is 
pressed.
C
Press the [Menu] button to exit the configuration 
menu.
Selecting the Projection Quality (Color Mode)
The following seven preset colour modes are available for use depending 
on the characteristics of the images that are being projected. You can easily 
obtain the optimum image quality simply by selecting the colour mode...