Epson Projector Emp 62 User Manual

26
Security functionsPreventing theft (Password Protect)
When the Password Protect function is activated, people who do not know 
the password will not be able to use the projector to project images, if the 
power has been disconnected since the password was last entered correctly. 
Furthermore, the users logo that is displayed on the background of the 
screen cannot be changed. This is effective against theft. At the time of 
purchase, the password protection function is not enabled.
 When Power On...

27
Security functions
 When Password Timer is set to On and Timer is used
The password entry screen will not be displayed at all when the power is 
turned on until the length of time that has been set has elapsed. When the 
set length of time has elapsed, the password entry screen will be displayed 
each time the power is turned on. The length of time referred to here is the 
total illumination time for the projectors lamp from the point when the 
projectors menu is closed.
If Password Timer is set to...

28
Security functionsC
Turn Password Timer on.
If you dont use this setting, proceed to step 4.
(1) Select Password Timer, and then press the [Enter] 
button.
(2) Select On, and then press the [Enter] button.
(3) Press the [Esc] button.
(4) Select Timer and then press the [Enter] button.
(5) While holding down the [Num] button, use the numeric 
keypad buttons to enter the setting time within the range of 
1 to 9999 hours and then press the [Enter] button.
If you make a mistake entering the time, press...

29
Security functionsOperation Button Lock Function
This function locks the buttons on the projectors control panel.
This function is useful at times such as during show events so that only 
projection is carried out deactivating all buttons operation, or in places 
such as schools to limit the range of buttons that can be operated.PROCEDUREA
From the configuration menu, select Settings - 
Operation Lock.
For details on this operation, refer to 
Using the Configuration 
Menu
. sp.32
Check the buttons you...

30
Security functionsC
When the confirmation message is displayed, select 
Yes.
The control panel buttons will be locked in accordance with the 
selected setting.
There are two methods to cancel the projectors control 
panel lock.
 Using remote control, change the Settings - 
Operation Lock in the configuration menu to Off .
 Hold down the projectors [Enter] button continuously 
for about 7 seconds, a message will be displayed and the 
lock will be cancelled. 

Configuration MenuThis chapter explains how to use the configuration menu and its functions.Using the Configuration Menu........................... 32
List of Functions ................................................. 33
 Image Menu.....................................................................33
 Signal Menu.....................................................................34
 Settings Menu.................................................................. 36
 Extended Menu...

32
Using the Configuration MenuA
Selecting from 
the top menu
C
Changing the 
selected item
B
Selecting from 
the sub menu
Top menu
Sub menu (Settings) guide
Using the remote controlUsing the control panel
Select the setting to change.
Buttons used 

33
List of FunctionsImage Menu
The items that can be set will vary depending on the input source that is currently being projected. Setting details are saved separately for each source.Sub-menu
Function
Color Mode
Select the quality of the image to suit your surroundings. sp.15
Brightness
Adjusts the image brightness.
Contrast
g
Adjusts the difference between light and shade in the images.
Color Saturation
Adjusts the colour saturation for the images.
Tint
(Adjustment is only possible when component...

34
List of FunctionsSignal Menu
The items that can be set will vary depending on the input source that is currently being projected. Setting details are saved separately for each source.
Sub-menu
Function
Auto Setup
Selects whether the automatic adjustment function for automatically optimising images when the input source is changed is turned On or 
Off. sp.13
Tracking
g
Adjusts computer images when vertical stripes appear in the images. sp.13
Sync.
g
Adjusts computer images when flickering, fuzziness or...

35
List of FunctionsVideo Signal
(Adjustment is only possible when composite video/S-Video signals are being input.)
Sets the video signal format.
With the Auto function, image signals are recognized automatically. If interference appears in the projected images or no images appear when 
you select Auto, select the appropriate signal manually.
Resize
Sets the aspect ratio
g for projected images. sp.21
Reset
Resets all adjustment values on the Signal menu to their default settings, except Computer Input,...