Epson Projector Emp 5600 User Manual
Here you can view all the pages of manual Epson Projector Emp 5600 User Manual. The Epson manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 71
![Page 71
Menu Operations - 69
Effect Bar Sets the color, direction and width of the bar allocated to the
[4] button on the remote control unit.
Press the [Enter] button and select the required item from the
bar setup menu. The color, direction and width can be
selected independently for each of the settings between 1
and 3.
·The [4] button executes the bar function. The bar types will
be switched between 1 and 3 sequentially for each time the
[4] button is pressed. (see page 60
)Individual
settings...](http://img.usermanuals.tech/thumb/23/89722/w300_epson-emp-5600-manual_d-70.png "Page 71
Menu Operations - 69
Effect Bar Sets the color, direction and width of the bar allocated to the
[4] button on the remote control unit.
Press the [Enter] button and select the required item from the
bar setup menu. The color, direction and width can be
selected independently for each of the settings between 1
and 3.
·The [4] button executes the bar function. The bar types will
be switched between 1 and 3 sequentially for each time the
[4] button is pressed. (see page 60
)Individual
settings...")
Menu Operations - 69 Effect Bar Sets the color, direction and width of the bar allocated to the [4] button on the remote control unit. Press the [Enter] button and select the required item from the bar setup menu. The color, direction and width can be selected independently for each of the settings between 1 and 3. ·The [4] button executes the bar function. The bar types will be switched between 1 and 3 sequentially for each time the [4] button is pressed. (see page 60 )Individual settings...
Page 72
![Page 72
70 - Menu Operations
Set-
tingSleep Mode Sets the energy-saving function for when no image signals
are being input. When this is set at [ON], projection will be
automatically ended and the projector will enter the sleep
mode if no image signals are input and no operations are
performed for a period of thirty minutes (the operation indi-
cator will be illuminated in orange).
Press the [Power] button to restart projection.ON
Reset Returns all setting menu adjustment values to the default
values.
Press...](http://img.usermanuals.tech/thumb/23/89722/w300_epson-emp-5600-manual_d-71.png "Page 72
70 - Menu Operations
Set-
tingSleep Mode Sets the energy-saving function for when no image signals
are being input. When this is set at [ON], projection will be
automatically ended and the projector will enter the sleep
mode if no image signals are input and no operations are
performed for a period of thirty minutes (the operation indi-
cator will be illuminated in orange).
Press the [Power] button to restart projection.ON
Reset Returns all setting menu adjustment values to the default
values.
Press...")
70 - Menu Operations Set- tingSleep Mode Sets the energy-saving function for when no image signals are being input. When this is set at [ON], projection will be automatically ended and the projector will enter the sleep mode if no image signals are input and no operations are performed for a period of thirty minutes (the operation indi- cator will be illuminated in orange). Press the [Power] button to restart projection.ON Reset Returns all setting menu adjustment values to the default values. Press...
Page 73
![Page 73
Menu Operations - 71
· The image menu and information displayed will differ in accordance with the projected input
source, and Menus other than that belonging to the projected input source cannot be adjusted.
·The information menu displays the status of the input source settings being projected.
Adva
ncedRear Proj. Set at [ON] to project images onto a half-transparent screen
from the rear. The projected image will be inverted.OFF
Ceiling Set at [ON] to project images when suspended from the ceil-
ing....](http://img.usermanuals.tech/thumb/23/89722/w300_epson-emp-5600-manual_d-72.png "Page 73
Menu Operations - 71
· The image menu and information displayed will differ in accordance with the projected input
source, and Menus other than that belonging to the projected input source cannot be adjusted.
·The information menu displays the status of the input source settings being projected.
Adva
ncedRear Proj. Set at [ON] to project images onto a half-transparent screen
from the rear. The projected image will be inverted.OFF
Ceiling Set at [ON] to project images when suspended from the ceil-
ing....")
Menu Operations - 71 · The image menu and information displayed will differ in accordance with the projected input source, and Menus other than that belonging to the projected input source cannot be adjusted. ·The information menu displays the status of the input source settings being projected. Adva ncedRear Proj. Set at [ON] to project images onto a half-transparent screen from the rear. The projected image will be inverted.OFF Ceiling Set at [ON] to project images when suspended from the ceil- ing....
Page 74
![Page 74
72 - Menu Operations
User logo registration
Registers the images currently displayed as the user logo.
1Displays the image that is to be registered as the user logo.
2Press the [Menu] button and select [User ’s Logo] - [Execute].
The confirmation screen will be displayed.
3Select [Yes] and then press the [ (Enter)] button on the main unit (the [Enter] button
on the remote control).
The image to be registered will be displayed.
4Adjust the position of the image with the [Sync +/-] and [Tracking +/-]...](http://img.usermanuals.tech/thumb/23/89722/w300_epson-emp-5600-manual_d-73.png "Page 74
72 - Menu Operations
User logo registration
Registers the images currently displayed as the user logo.
1Displays the image that is to be registered as the user logo.
2Press the [Menu] button and select [User ’s Logo] - [Execute].
The confirmation screen will be displayed.
3Select [Yes] and then press the [ (Enter)] button on the main unit (the [Enter] button
on the remote control).
The image to be registered will be displayed.
4Adjust the position of the image with the [Sync +/-] and [Tracking +/-]...")
72 - Menu Operations User logo registration Registers the images currently displayed as the user logo. 1Displays the image that is to be registered as the user logo. 2Press the [Menu] button and select [User ’s Logo] - [Execute]. The confirmation screen will be displayed. 3Select [Yes] and then press the [ (Enter)] button on the main unit (the [Enter] button on the remote control). The image to be registered will be displayed. 4Adjust the position of the image with the [Sync +/-] and [Tracking +/-]...
Page 75
![Page 75
Menu Operations - 73
5Select [Yes] and then press the [ (Enter)] button on the main unit (the [Enter] button
on the remote control).
The enlargement setup screen will be displayed.
6Select the enlargement rate and then press the [ (Enter)] button on the main unit (the
[Enter] button on the remote control).
The screen to confirm saving will be displayed.
7Select [Yes] and then press the [ (Enter)] button on the main unit (the [Enter] button
on the remote control).
The image will be saved. Wait until...](http://img.usermanuals.tech/thumb/23/89722/w300_epson-emp-5600-manual_d-74.png "Page 75
Menu Operations - 73
5Select [Yes] and then press the [ (Enter)] button on the main unit (the [Enter] button
on the remote control).
The enlargement setup screen will be displayed.
6Select the enlargement rate and then press the [ (Enter)] button on the main unit (the
[Enter] button on the remote control).
The screen to confirm saving will be displayed.
7Select [Yes] and then press the [ (Enter)] button on the main unit (the [Enter] button
on the remote control).
The image will be saved. Wait until...")
Menu Operations - 73 5Select [Yes] and then press the [ (Enter)] button on the main unit (the [Enter] button on the remote control). The enlargement setup screen will be displayed. 6Select the enlargement rate and then press the [ (Enter)] button on the main unit (the [Enter] button on the remote control). The screen to confirm saving will be displayed. 7Select [Yes] and then press the [ (Enter)] button on the main unit (the [Enter] button on the remote control). The image will be saved. Wait until...
Page 76
74 - Troubleshooting Troubleshooting This section provides explanations on potential problems and the methods of taking care of them. Troubleshooting When you think you have a problem, first of all check the Indicators on the projector. The projector is fitted with Operation Indicator, Lamp Indicator and Temperature Indicator to advise the projector’s status. Operation Indicator Indicator StatusCauseRecovery or StatusReference Page Illuminated in OrangeStand-by status (Not an error) Projection...
Page 77
Troubleshooting - 75 Lamp Indicator Blinking in Green Warm-up in progress(Not an error) ·Wait for a moment. ·The green lamp will stop blinking and become illuminated once the warm-up procedure has been completed.42 Illuminated in Red Internal error Cease operations, remove the Power Plug from the socket and contact your dealer or nearest address provided at page 97 and request repairs. Extinguished The power is not switched onThe power is not switched on. ·Check the power cord connection....
Page 78
![Page 78
76 - Troubleshooting
Temperature Indicator
Point
·Refer to the section on [When the Indicators Provide No Help] on the following page if the
Indicators appear normal but the projected image is defective.
·Contact your dealer if an Indicator status not covered by the above table is apparent.
Indicator StatusCauseRecovery and StatusReference
Page
Illuminated in Red Excesive internal
temperature
(overheating)·Use the projector within the permissible
temperature range of between 5 degrees
Celsius and 40...](http://img.usermanuals.tech/thumb/23/89722/w300_epson-emp-5600-manual_d-77.png "Page 78
76 - Troubleshooting
Temperature Indicator
Point
·Refer to the section on [When the Indicators Provide No Help] on the following page if the
Indicators appear normal but the projected image is defective.
·Contact your dealer if an Indicator status not covered by the above table is apparent.
Indicator StatusCauseRecovery and StatusReference
Page
Illuminated in Red Excesive internal
temperature
(overheating)·Use the projector within the permissible
temperature range of between 5 degrees
Celsius and 40...")
76 - Troubleshooting Temperature Indicator Point ·Refer to the section on [When the Indicators Provide No Help] on the following page if the Indicators appear normal but the projected image is defective. ·Contact your dealer if an Indicator status not covered by the above table is apparent. Indicator StatusCauseRecovery and StatusReference Page Illuminated in Red Excesive internal temperature (overheating)·Use the projector within the permissible temperature range of between 5 degrees Celsius and 40...
Page 79
When the Indicators provide No Help - 77 When the Indicators provide No Help Refer to each relevant item if the following situations arise but the indicators provide no help. ·The image is not projected page 77 ·No sound page 82 ·The image is unclear page 79 ·The remote control will not work page 83 ·The image is cut up (Large)/Small page 81 ·Cannot end page 83 ·The image color is bad page 81 ·The image is dark page 82 The image is not projected Nothing is displayed Nothing is displayed Is the...
Page 80
![Page 80
78 - When the Indicators provide No Help Messages
[Not Supported]
will be displayed
[No Signal]
will be displayed
Is the resolution of the image signals being output from the
computer higher than the displayable resolution (ELP-7600: 1600 x
1200, ELP-5600: 1440 x 1080)?
see page 26
Check to ensure that the mode supports the frequency of the image
signals output from the computer.
Refer to the computer’s instruction manual to discover how to amend
the resolution and frequency of the image signals...](http://img.usermanuals.tech/thumb/23/89722/w300_epson-emp-5600-manual_d-79.png "Page 80
78 - When the Indicators provide No Help Messages
[Not Supported]
will be displayed
[No Signal]
will be displayed
Is the resolution of the image signals being output from the
computer higher than the displayable resolution (ELP-7600: 1600 x
1200, ELP-5600: 1440 x 1080)?
see page 26
Check to ensure that the mode supports the frequency of the image
signals output from the computer.
Refer to the computer’s instruction manual to discover how to amend
the resolution and frequency of the image signals...")
78 - When the Indicators provide No Help Messages [Not Supported] will be displayed [No Signal] will be displayed Is the resolution of the image signals being output from the computer higher than the displayable resolution (ELP-7600: 1600 x 1200, ELP-5600: 1440 x 1080)? see page 26 Check to ensure that the mode supports the frequency of the image signals output from the computer. Refer to the computer’s instruction manual to discover how to amend the resolution and frequency of the image signals...