Epson Projector Emp 5600 User Manual

 Connecting the projector to a computer - 29
In the case of the Computer1 port (mini D-sub 15-pin)
·Connect the computer’s monitor port to the Computer #1 mini D-Sub 15 Port on the projector 
with the computer cable supplied.
·Set the switch to the analog setting (left-hand side) with the tip of a ballpoint pen or other 
pointed object.
 When the monitor port is the D-Sub 15 pin.
Caution
·Switch off the power supply to the projector and computer before attempting to make the con-
nection. Failure to...

30 - Connecting the projector to a computer When the monitor port is the 5BNC
Point
·Do not bind the Power Cable and the Computer Cable together. Failure to observe this 
may result in video noise and malfunctions.
·An adapter may be required when making the connection depending on the stand of the 
computer’s port. Refer to the computer instruction manual for further details.
·There are cases where the optional Mac Desktop Adapter (ELPAP01) is required when 
connecting up to a Macintosh.
·It is...

 Connecting the projector to a computer - 31
In the case of the Computer2/Component Video port
Connect the computers monitor port to the projectors Computer #2 port with the computer 
cable supplied, or with an optional computer cable (ELPKC02, ELPKC09, ELPKC10).
Point
·Set the Computer2 parameter in the menu to [RGB] when establishing the connection. 
(see page 69
)
·Connections can be made to both computer #1 port and computer #2 port when two com-
puters are to be connected.
Computer #2 Port 
Monitor...

32 - Connecting the projector to a computer
In the case of DVI-D*
Digital signals are output to the projector without amendment if a digital video card for liquid 
crystal displays and output port are mounted onto the computer.
·Connect the Computer’s digital output port to the projector’s Computer #1 DVI-D port with 
the optional digital video cable (ELPKC20/21).
·Set the switch to the digital setting (right-hand side) with the tip of a ballpoint pen or other 
pointed object.
Point:
·There are cases...

 Connecting the projector to a computer - 33
Sound connection
The projector is equipped with two built-in speakers capable of outputing a maximum of 3W, 
and it is also possible to output computer sound from the projector’s speakers.
 Connecting the computer to Computer #1
Connect the projector’s Audio1 Port (stereo mini jack) to the computer’s audio output port  
with the Audio Cable supplied.
 Connecting the computer to Computer #2
Connect the computers audio output port to the projectors L-Audio2-R...

34 - Connecting the projector to a computer
Connecting external audio equipment
It is possible to enjoy dynamic sound by connecting the Audio Out port on the projector to a 
PA system, an active speaker system, or other speakers equipped with built-in amplifiers.
Use audio connection cables available on the open market (pin plug  3.5mm stereo mini-
jack plug).
Point
·The sound is output externally when the stereo mini-jack is inserted into the Audio Out 
port. Sound will not be output from the projectors...

 Connecting the projector to a computer - 35
Connecting the mouse (wireless mouse function)
This enables the computer’s mouse pointer to be operated with the remote control in the same 
way as a wireless mouse.
Connect the computers mouse port to the projectors Mouse ports with the use of a mouse 
cable.
Point
·Only the USB standard mounted model supports USB Mouse Cable connections. In the 
case of Windows, only the Windows 98/2000 preinstalled model is supported.
Operations cannot be guaranteed on...

36 - Connecting the projector to a computer
Perform the following mouse operations after the connection has been established:
Left click  - - - - - - - - - - - - - - - - - Press the [Enter] button.
Right click  - - - - - - - - - - - - - - - - Press the [Esc] button.
Mouse pointer movement - - - - - Lower the remote control [Enter] button.
Point
·The operations will be reversed if the left/right button functions of the mouse pointer have 
been amended with the computer.
·The mouse cannot be used when the...

 Connecting the video equipment - 37




 
Connecting the video equipment
Switch off the power supply to the projector and video equipment prior to attempting to 
make the connection.
In the case of composite image signals
·Connect the projector’s Video Port to the video equipment with the supplied RCA Video 
Cable (Yellow).
·Connect the L-Audio2-R ports with the RCA audio cable supplied (red/white) to output 
sound from the projectors speakers.
In the case of S image signals
·Connect the projector’s...

38 - Connecting the video equipment
In the case of component (color differential*) image signals
·Connect the video equipment to the projectors Computer 2/Component Video port with an 
optional component video cable (ELPKC19).
·Connect the L-Audio2-R ports with the RCA audio cable supplied (red/white) to output 
sound from the projectors speakers.
Point
Set the Computer2 parameter on the menu to [YCbCr] or [YPbPr], as appropriate for the 
input signal being used, when the connection has been established....