Epson Projector Emp 5600 User Manual

 Connecting the video equipment - 39
In the case of the digital tuners D output port
·Connect the digital tuner to the projectors Computer2/Component Video port with the 
optional D port cable (ELPKC22).
·Connect the L-Audio2-R ports with the RCA audio cable supplied (red/white) to output 
sound from the projectors speakers.
Point
·Set the Computer2 parameter on the menu to [YCbCr] or [YPbPr], as appropriate for the 
input signal being used, when the connection has been established. (see page 69
)...

40 - Connecting the video equipment
In the case of RGB image signals
·Connect the projectors Computer2/Component Video port to the video equipment with the 
component image cable (available on the open market).
·Connect the L-Audio2-R ports with the RCA audio cable supplied (red/white) to output 
sound from the projectors speakers.
Point
·Purchase the RGB image cable to match the connectors on your equipment.
·Set the Computer2 parameter on the menu to [RGB] when the connection has been 
established....

 Projection - 41
Projecting
This section provides explanations on starting and ending projection, and on the basic func-tions for adjusting projected images.




 
Projection
Images can be projected after all connections have been completed.
Preparations
1Connect the projector to a computer and video equipment. (see page 26, 37)
2Remove the Lens Cover.
3Attach the supplied Power Cord to the projector.
Check to confirm the shape of the projector’s Power Inlet and Power Connector, align the 
connector in...

42 - Projection
4Plug the Power Plug into the power socket.
The Operation Indicator will be illuminated in orange.
Commencing projection
1Press the [Power] button to turn on the power supply.
The Operation Indicator will begin to blink in green, and projection will be started.
The Operation Indicator will change from blinking to being steadily illuminated in green 
after a while.
Point
Button operations are not possible when the Operation Indicator is blinking in green.
Computer
A/V mute
Resize Power...

 Projection - 43
2Select the Port to which the connection has been made when more than one item of
 equipment has been connected.
Press the port button connected to the computer or video equipment to switch the input 
source.
Point
·Even if there is a physical connection, the system will automatically switch to the state 
used immediately before power-off if there is no input signal, or if the connected equip-
ment is not outputting a signal. 
·The Computer #2/Component Video port sources that are...

44 - Projection
3Starting projection.
Switch on the power supply to the computer or video equipment. If the equipment con-
nected is video equipment, then also press the [Playback] or [Play] buttons.
The [No Signal] display will be erased, and projection will commence.
Point
·If [No Signal] remains displayed, check the connections once again.
·Depending on the computer, there are cases when it is necessary to switch the image sig-
nal output destination with the key ( , etc.) or the settings after...

 Ending - 45




 
Ending
End through the following procedure. 
1Turn off the connected equipment.
2Press the [Power] button.
A message to confirm that the power needs to be switched off will be displayed.
3Press the [Power] button once more.
The lamp will be extinguished, the Operation Indicator will blink in orange, and the cool-
down process will commence.
The Operation Indicator will change from blinking to being illuminated in orange once the 
cool-down process has been completed. The amount of time...

46 - Ending
4After cooling (check that the operation indicator is illuminated in orange), unplug the 
Power Plug from the socket. 
5Set the R/C ON OFF switch to [OFF] when using the remote control.
Point
The batteries are being consumed when the [R/C ON OFF] switch on the remote control 
unit is set at [ON]. Ensure that the [R/C ON OFF] switch on the remote control unit is set to 
[OFF] when not in use.
6Restore the Front Foot if it has been extended.
Steady the projector by hand, and then lift the Foot...

 Adjusting the Projection Position - 47




 
Adjusting the Projection Position
The projector can be adjusted into the following vertical projection positions.
Feet adjustments
Adjust the projection angle of the projector. 
1Lift the Foot Adjust Lever with a finger and raise the front part of the projector.
The Front Foot will protrude.
2Remove your finger from the Foot Adjust Lever, and then let go of the projector.
3Rotate the lower part of the Front Foot to minutely adjust the height.
Point
·There are...

48 - Adjusting the Projection Size




 
Adjusting the Projection Size
It is possible to adjust the size of the projection and correct any trapezoid distortion.
Point
A function to resize the screen (see page 56) and an E-Zoom function for enlarging certain 
areas (see page 57) are also available.
Zoom adjustment
1Rotate the Zoom Ring to make the required adjustments (enlargment up to a maximum 
of 1.3x is possible).
The projection distance must also be adjusted when enlarging the screen. (see page 24
)...