Epson Projector Emp 5600 User Manual
Here you can view all the pages of manual Epson Projector Emp 5600 User Manual. The Epson manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 61
![Page 61
Effect Function - 59
4Lower the [Enter] button on the remote control unit to move the cursor to the ending
position.
5Press the [Enter] button to set the end position.
Point
·The decoration will be erased when the [5] button is pressed.
·There are cases where the effect will be difficult to see depending on the color combina-
tion of the images background and box. Amend the color of the box in this event. (see
page 68)
·The mouse cannot be used when the effect function is in progress.
Spotlight
Shines...](http://img.usermanuals.tech/thumb/23/89722/w300_epson-emp-5600-manual_d-60.png "Page 61
Effect Function - 59
4Lower the [Enter] button on the remote control unit to move the cursor to the ending
position.
5Press the [Enter] button to set the end position.
Point
·The decoration will be erased when the [5] button is pressed.
·There are cases where the effect will be difficult to see depending on the color combina-
tion of the images background and box. Amend the color of the box in this event. (see
page 68)
·The mouse cannot be used when the effect function is in progress.
Spotlight
Shines...")
Effect Function - 59 4Lower the [Enter] button on the remote control unit to move the cursor to the ending position. 5Press the [Enter] button to set the end position. Point ·The decoration will be erased when the [5] button is pressed. ·There are cases where the effect will be difficult to see depending on the color combina- tion of the images background and box. Amend the color of the box in this event. (see page 68) ·The mouse cannot be used when the effect function is in progress. Spotlight Shines...
Page 62
![Page 62
60 - Effect Function
Bar
Draws a bar line on the image.
1Press the [4] button on the remote control unit to display the required cursor/stamp.
The selection will switch between three different bars whenever the [4] button is pressed.
2Press the [Enter] button to set the end position.
Point
·The effect function will be canceled and the bar will disappear when the [Esc] button is
pressed.
·There are cases where the effect will be difficult to see depending on the color combina-
tion of the images...](http://img.usermanuals.tech/thumb/23/89722/w300_epson-emp-5600-manual_d-61.png "Page 62
60 - Effect Function
Bar
Draws a bar line on the image.
1Press the [4] button on the remote control unit to display the required cursor/stamp.
The selection will switch between three different bars whenever the [4] button is pressed.
2Press the [Enter] button to set the end position.
Point
·The effect function will be canceled and the bar will disappear when the [Esc] button is
pressed.
·There are cases where the effect will be difficult to see depending on the color combina-
tion of the images...")
60 - Effect Function Bar Draws a bar line on the image. 1Press the [4] button on the remote control unit to display the required cursor/stamp. The selection will switch between three different bars whenever the [4] button is pressed. 2Press the [Enter] button to set the end position. Point ·The effect function will be canceled and the bar will disappear when the [Esc] button is pressed. ·There are cases where the effect will be difficult to see depending on the color combina- tion of the images...
Page 63
![Page 63
P in P Function - 61
P in P Function
The video image (YCbCr or YPbPr) will be displayed as a sub-screen inside the computer
image or component video image.
1Press the [P in P] button.
Operation instructions will be displayed at the bottom left-hand side, and the sub-screen
will be situated at the top right-hand side of the main screen.
2Press the [Enter] button on the remote control to move the position of the sub-screen.
3Press the [E-Zoom] button to change the size of the sub-screen.
4Press...](http://img.usermanuals.tech/thumb/23/89722/w300_epson-emp-5600-manual_d-62.png "Page 63
P in P Function - 61
P in P Function
The video image (YCbCr or YPbPr) will be displayed as a sub-screen inside the computer
image or component video image.
1Press the [P in P] button.
Operation instructions will be displayed at the bottom left-hand side, and the sub-screen
will be situated at the top right-hand side of the main screen.
2Press the [Enter] button on the remote control to move the position of the sub-screen.
3Press the [E-Zoom] button to change the size of the sub-screen.
4Press...")
P in P Function - 61 P in P Function The video image (YCbCr or YPbPr) will be displayed as a sub-screen inside the computer image or component video image. 1Press the [P in P] button. Operation instructions will be displayed at the bottom left-hand side, and the sub-screen will be situated at the top right-hand side of the main screen. 2Press the [Enter] button on the remote control to move the position of the sub-screen. 3Press the [E-Zoom] button to change the size of the sub-screen. 4Press...
Page 64
![Page 64
62 - Volume Adjustment
Adjustments and Settings
This section provides explanations on adjusting the projector volume and on setup menu operations.
Volume Adjustment
The volume can be amended when sound is emitted from the projector speakers.
1Press the [Volume+, -] button while pressing the [Shift] button([Volume+, -]button on
the remote control).
Point
·Adjustment is not possible when no sound signals are being input.
·Adjustment is possible when outputting sound to external speakers.
EscMenu...](http://img.usermanuals.tech/thumb/23/89722/w300_epson-emp-5600-manual_d-63.png "Page 64
62 - Volume Adjustment
Adjustments and Settings
This section provides explanations on adjusting the projector volume and on setup menu operations.
Volume Adjustment
The volume can be amended when sound is emitted from the projector speakers.
1Press the [Volume+, -] button while pressing the [Shift] button([Volume+, -]button on
the remote control).
Point
·Adjustment is not possible when no sound signals are being input.
·Adjustment is possible when outputting sound to external speakers.
EscMenu...")
62 - Volume Adjustment Adjustments and Settings This section provides explanations on adjusting the projector volume and on setup menu operations. Volume Adjustment The volume can be amended when sound is emitted from the projector speakers. 1Press the [Volume+, -] button while pressing the [Shift] button([Volume+, -]button on the remote control). Point ·Adjustment is not possible when no sound signals are being input. ·Adjustment is possible when outputting sound to external speakers. EscMenu...
Page 65
Menu Configuration - 63 Menu Configuration The menu enables the various adjustments and settings to be made. Menu items The menus are split into top menus and sub menus and consist of a hierarchy structure. Also, the image menu will differ in accordance with the input source (connected port). Menu items Point ·The items displayed on the image menu will differ in accordance with the projected input source, and most menus other than that belonging to the projected input source cannot be...
Page 66
64 - Menu Configuration Point The lamp illumination time is displayed as 0H between 0 and 10 hours, and in units of 1 hour above 10 hours. Sound menu Effect menu Setup menu User’s Logo menu Advance settings menu Information menu The information menu displays the setup status of the projected input source All reset menu Volume Treble Bass Reset Execute : : :0 0 0 Video Audio Effect Setting Users Logo Advanced About Reset All :Select :Enter 1 Cursor/Stamp 2 Box 3 Spotlight 4 Bar Cursor Speed...
Page 67
![Page 67
Menu Operations - 65
Menu Operations
The menus can be operated from both the projector and the remote control unit.
Operation method
1Press the [Menu] button.
The top menu will be displayed.
2Select the required item.
Press the [Sync +, -] button on the projector (lower the [Enter] button up or down on the
remote control unit) to select the required item.
3Set the selected item.
Press the [ (Enter)] button on the projector (the [Enter] button on the remote control unit)
to set the selected item....](http://img.usermanuals.tech/thumb/23/89722/w300_epson-emp-5600-manual_d-66.png "Page 67
Menu Operations - 65
Menu Operations
The menus can be operated from both the projector and the remote control unit.
Operation method
1Press the [Menu] button.
The top menu will be displayed.
2Select the required item.
Press the [Sync +, -] button on the projector (lower the [Enter] button up or down on the
remote control unit) to select the required item.
3Set the selected item.
Press the [ (Enter)] button on the projector (the [Enter] button on the remote control unit)
to set the selected item....")
Menu Operations - 65 Menu Operations The menus can be operated from both the projector and the remote control unit. Operation method 1Press the [Menu] button. The top menu will be displayed. 2Select the required item. Press the [Sync +, -] button on the projector (lower the [Enter] button up or down on the remote control unit) to select the required item. 3Set the selected item. Press the [ (Enter)] button on the projector (the [Enter] button on the remote control unit) to set the selected item....
Page 68
![Page 68
66 - Menu Operations
5Select the parameter value.
Press the [Tracking +, -] button on the projector (lower the [Enter] button left or right on
the remote control unit) to select the parameter value.
Point
·(Enter) is attached to the rear of the sub item names that execute the parameters and
continue onto the lower hierarchies. Press the [Enter] button to set this selection, and
then select the parameter setting again.
·Refer to the list of settings for further information on the function of each...](http://img.usermanuals.tech/thumb/23/89722/w300_epson-emp-5600-manual_d-67.png "Page 68
66 - Menu Operations
5Select the parameter value.
Press the [Tracking +, -] button on the projector (lower the [Enter] button left or right on
the remote control unit) to select the parameter value.
Point
·(Enter) is attached to the rear of the sub item names that execute the parameters and
continue onto the lower hierarchies. Press the [Enter] button to set this selection, and
then select the parameter setting again.
·Refer to the list of settings for further information on the function of each...")
66 - Menu Operations 5Select the parameter value. Press the [Tracking +, -] button on the projector (lower the [Enter] button left or right on the remote control unit) to select the parameter value. Point ·(Enter) is attached to the rear of the sub item names that execute the parameters and continue onto the lower hierarchies. Press the [Enter] button to set this selection, and then select the parameter setting again. ·Refer to the list of settings for further information on the function of each...
Page 69
![Page 69
Menu Operations - 67
Setting items
To p
MenuSub MenuFunctionDefault Value
Video Position Moves the images display position up, down, left and right.
Press the [Enter] button to make the required adjustments on
the position adjustment screen displayed.Depends on the
connection
signals
Tracking Adjusts vertical stripes that appear on the Computer image. Depends on the
connection
signals
Sync. Adjusts disturbance, blurring and vertical noise that appears
on the Computer image.
·Disturbance and...](http://img.usermanuals.tech/thumb/23/89722/w300_epson-emp-5600-manual_d-68.png "Page 69
Menu Operations - 67
Setting items
To p
MenuSub MenuFunctionDefault Value
Video Position Moves the images display position up, down, left and right.
Press the [Enter] button to make the required adjustments on
the position adjustment screen displayed.Depends on the
connection
signals
Tracking Adjusts vertical stripes that appear on the Computer image. Depends on the
connection
signals
Sync. Adjusts disturbance, blurring and vertical noise that appears
on the Computer image.
·Disturbance and...")
Menu Operations - 67 Setting items To p MenuSub MenuFunctionDefault Value Video Position Moves the images display position up, down, left and right. Press the [Enter] button to make the required adjustments on the position adjustment screen displayed.Depends on the connection signals Tracking Adjusts vertical stripes that appear on the Computer image. Depends on the connection signals Sync. Adjusts disturbance, blurring and vertical noise that appears on the Computer image. ·Disturbance and...
Page 70
![Page 70
68 - Menu Operations
Video Video Signal Sets the video signal method.
Press the [Enter] button and select the required setting from
the video signal method selection menu displayed.
·The video signal method will be automatically set up in the
[Auto] mode, but do not use the [Auto] mode for the PAL
system (60Hz).Auto
Reset Returns all image menu adjustment values to the default val-
ues.
Press the [Enter] button and then select [Yes] on the confir-
mation screen displayed.
·Select [Reset All] to return...](http://img.usermanuals.tech/thumb/23/89722/w300_epson-emp-5600-manual_d-69.png "Page 70
68 - Menu Operations
Video Video Signal Sets the video signal method.
Press the [Enter] button and select the required setting from
the video signal method selection menu displayed.
·The video signal method will be automatically set up in the
[Auto] mode, but do not use the [Auto] mode for the PAL
system (60Hz).Auto
Reset Returns all image menu adjustment values to the default val-
ues.
Press the [Enter] button and then select [Yes] on the confir-
mation screen displayed.
·Select [Reset All] to return...")
68 - Menu Operations Video Video Signal Sets the video signal method. Press the [Enter] button and select the required setting from the video signal method selection menu displayed. ·The video signal method will be automatically set up in the [Auto] mode, but do not use the [Auto] mode for the PAL system (60Hz).Auto Reset Returns all image menu adjustment values to the default val- ues. Press the [Enter] button and then select [Yes] on the confir- mation screen displayed. ·Select [Reset All] to return...