Epson Projector Emp 54 User Manual

60
Using the Configuration Menu Functions
Using the Configuration Menu Functions
User’s Logo Menu
Sub-menu
Function
Default
Execute
Records a users logo.   p.90
 Press the [Enter] button on the remote control and follow  the procedure appearing on the screen.
 A users logo cannot be recorded if the User’s Logo  Protect function of Password Protect has been set to ON. 
Cancel the Password Protect function before recording a 
users logo.
EPSON logo 

61
Using the Configuration Menu Functions
Using the Configuration Menu Functions
Advanced Menu
Sub-menu
Function
Default
Brightness 
Control
This lets you set the lamp brightness to one of two settings.
Select Low if the images being projected are too bright 
such as when projecting images in a dark room or onto a 
small screen.
When Low is selected, the brightness of the images is 
reduced, the amount of electricity consumed and noise 
produced during projection are reduced and the lamps 
operating life...

62
Using the Configuration Menu Functions
Using the Configuration Menu Functions
Color 
Adjustment
Adjusts the absolute Abs. Color Temp.
 and intensity of 
each RGB (red, green, blue) colour for each input source. Abs. Color Temp.: Lets you adjust bright colours within a 
range from reddish tinges to bluish 
tinges. 
If the colour temperature is lower, 
colours appear reddish and color tones 
appear softer. 
If the colour temperature is higher, 
colours appear bluish and colour tones 
appear sharper....

63
Using the Configuration Menu Functions
Using the Configuration Menu Functions
COM Port
This can be set to either RS-232C or USB, depending on 
the port that is being used for communication with a 
computer.
When this setting is changed, turn off the power 
momentarily, and when the cool-down
 period has finished, 
turn the power back on again. The new setting will be 
applied after the power turns back on.
RS-232C
Language
Sets the language for message displays.  Press the [Enter] button on the...

64
Using the Configuration Menu Functions
Using the Configuration Menu Functions The Info menu shows the setting details for the current image source.
 The Lamp Hours item appears as 0H for 0–10 hours,  and after that, it appears in units of 1 hour.
Info MenuComputer (Analogue-RGB)/RGB Video/
Component video
 (YCbCr
, YPbPr
)
Video ( Composite video
, S-Video
)
Sub-menu
Function
Default
Lamp 
Hours
Displays the cumulative lamp operating time for both High 
and Low brightness operation.
 When the lamp...

65
Using the Configuration Menu Functions
Using the Configuration Menu Functions
Reset All Menu
Sub-menu
Function
Default
Execute
Resets all items in all menus to their default settings. Press the [Enter] button on the remote control to reset the  settings.
 Select Reset in an individual sub-menu such as the  Image or Audio menu to reset only the settings for the 
items in each sub-menu.
 The Input Signal, User’s Logo, Lamp Hours and  Language settings will not retu rn to their default values.
 If...

66
Using the Configuration Menu FunctionsUsing the Configuration Menus
The configuration menus can be operated using the remote control only.PROCEDURE
Press the [Menu] button.
The configuration menu appears.Select a menu item.
Press the [ ] or [ ] button to move to an item to be selected.
Confirm the selection.Press the [Enter] button to confirm the selection of a menu item.The selected sub-menu will then be displayed. 
1
Remote control
2
3 

67
Using the Configuration Menu Functions
Select a sub-menu item.
Press the [ ] and [ ] buttons to select the sub-menu item to be 
set, and then press the [Enter] button.
The items appearing in the Image menu and the Info menu 
will vary depending on the type of input source being projected.
Change the setting.
 Press the [ ], [ ], [ ] and [ ] buttons to change the setting. : Current setting value
 : Currently-selected setting item
 If you press the [Enter] button at items with a   displayed, the...

TroubleshootingThis chapter describes how to identify problems and what to do if a problem is found.Using the Help ..................................................... 69
Problem Solving.................................................. 71
 Reading the Indicators........................................................ 71 Power Indicator .......................................................................... 71
    (Warning) Indicator ........................................................... 72...

69
Using the HelpIf a problem occurs with the projector, the Help function uses on-screen 
displays to assist you in solving the problem. It uses a series of menus in a 
question and answer format.
PROCEDURE
Press the [Help] button.
The help menu will be displayed.Select a menu item.
If using the control panel, the [ Select ] buttons function as 
the up and down keys.
If using the remote control, press the [ ] and [ ] buttons to 
select an item.
Confirm the selection.
Press the [Enter] button to confirm...