Epson Projector Emp 54 User Manual

50
Using the Configuration Menu FunctionsThe configuration menus can be used to carry out a variety of settings and adjustments.
The menus have a hierarchical structure, with a main menu that  is divided into sub-menus, which are further divided into other sub-menus.
The remote control is used to operate the me nus. Refer to Using the Configuration Menus    p.66 for details on using the menus.
Main menu Sub-menu (Image) 

51
Using the Configuration Menu Functions
Using the Configuration Menu FunctionsList of Functions
 The functions in the Image menu apart from Input Signal, Auto Setup and Video  Signal cannot be adjusted while no image signal is being input.
 The functions which appear in the Image menu will change de pending on the type of input source being used for the image signal. Functions which are not 
available in the Image menu for a partic ular input source cannot be adjusted.Image MenuComputer...

52
Using the Configuration Menu Functions
Using the Configuration Menu Functions
Color 
Mode
Corrects the vividness of the image colour. The settings can 
be saved separately for each type of source (computer or 
video source). You can select from six different quality 
settings depending on the surroundings. Dynamic : Brightness is emphasised, so that images are 
fresher and have greater modulation than in 
Presentation mode.
Presentation : Brightness is emphasised to produce images 
that are ideal...

53
Using the Configuration Menu Functions
Using the Configuration Menu Functions
Reset
Resets all adjustment values for the Image menu functions 
except for the Input Signal setting to their default settings. Press the [Enter] button on the remote control to reset the  settings.
 Select Reset All to return all settings for menus such as  Image and Audio to  their default settings. 
 p.65
-
Sub-menu
Function
Default 

54
Using the Configuration Menu Functions
Using the Configuration Menu Functions
Component video
 (YCbCr
, YPbPr
)
Video ( Composite video
, S-Video
)
Sub-menu
Function
Default
Position
Moves the image display positi on vertically and horizontally.
 Press the [Enter] button and make the adjustment using the  display position adjustment  sub-menu that appears.
Depends on 
connection
Brightness
Adjusts the image brightness.
Median value 
(0)
Contrast
Adjusts the difference between light and shade in the...

55
Using the Configuration Menu Functions
Using the Configuration Menu Functions
Color 
Mode
Corrects the vividness of the image colour. The settings can 
be saved separately for each type of source (computer or 
video source). You can select from six different quality 
settings depending on the surroundings. Dynamic : Brightness is emphasised, so that images are 
fresher and have greater modulation than in 
Presentation mode.
Presentation : Brightness is emphasised to produce images 
that are ideal...

56
Using the Configuration Menu Functions
Using the Configuration Menu Functions
Vi d e o  
Signal
(Adjustment is only possible when composite video/S-Video 
signals are being input.)
Sets the video signal format.  Press the [Enter] button on the remote control, and choose  the setting from the video signal format selection sub-menu 
which appears.
 When set to Auto, the video signal format is set  automatically.
Auto
Aspect Ratio
Sets the aspect ratio for projected images.
Depends on 
connection...

57
Using the Configuration Menu Functions
Using the Configuration Menu Functions
Audio Menu
Sub-menu
Function
Default
Volume
Adjusts the volume.
Median value 
(10)
Audio 
Input
Selects the input source (port) for audio signals at the rear of 
the projector.
The default setting varies de pending on the type of signal 
being input (for computer, RGB video and component video 
input signals: Audio1; for vide o and S-Video input signals: 
Audio2) Therefore, if audio  signals are being input to a 
different...

58
Using the Configuration Menu Functions
Using the Configuration Menu Functions
Setting Menu
Sub-menu
Function
Default
Keystone
Corrects vertical keystone distortion in images. When keystone correction is carried out, the projected  image will become smaller.
 If the images become uneven in appearance after keystone  correction is carried out, decrease the sharpness setting.
Median value 
(0)
Auto 
Keystone
Sets the function for automatically detecting the projector 
angle and correcting keystone ON...

59
Using the Configuration Menu Functions
Using the Configuration Menu Functions
Reset
Resets all adjustment values for the Setting menu functions 
to their default settings.
However, if Background Color has been set to Logo, the 
setting cannot be returned to the default setting if the User’s 
Logo Protect function of Passwo rd Protect has been set to 
ON.  Press the [Enter] button on the remote control to reset the  settings.
 Select Reset All to return all settings for menus such as  Image and Audio...