Epson Projector Emp 54 User Manual

							50
Using the Configuration Menu FunctionsThe configuration menus can be used to carry out a variety of settings and adjustments.
The menus have a hierarchical structure, with a main menu that  is divided into sub-menus, which are further divided into other sub-menus.
The remote control is used to operate the me nus. Refer to Using the Configuration Menus    p.66 for details on using the menus.
Main menu Sub-menu (Image) 
						

							51
Using the Configuration Menu Functions
Using the Configuration Menu FunctionsList of Functions
 The functions in the Image menu apart from Input Signal, Auto Setup and Video  Signal cannot be adjusted while no image signal is being input.
 The functions which appear in the Image menu will change de pending on the type of input source being used for the image signal. Functions which are not 
available in the Image menu for a partic ular input source cannot be adjusted.Image MenuComputer (Analogue-RGB)/RGB video
Sub-menu
Function
Default
Position
Moves the image display position vertically and horizontally.
 Press the [Enter] button on the remote control and make the  adjustment using the display position adjustment screen that 
appears.
Depends on 
connection
Tracking
Adjusts computer images when vertical stripes appear in the 
images.
Depends on 
connection
Sync.
Adjusts computer images when flickering, fuzziness or 
interference appear in the images. Flickering and fuzziness may also appear when the  brightness,  contrast
, sharpness or keystone settings are 
adjusted.
 You can obtain the best results if you adjust the tracking  first and then adjust the sync.
Depends on 
connection
Brightness
Adjusts the image brightness.
Median value 
(0)
Contrast
Adjusts the difference between light and shade in the images.
Median value 
(0)
Sharpness
Adjusts the image sharpness.
Median value 
(0) 
						

							52
Using the Configuration Menu Functions
Using the Configuration Menu Functions
Color 
Mode
Corrects the vividness of the image colour. The settings can 
be saved separately for each type of source (computer or 
video source). You can select from six different quality 
settings depending on the surroundings. Dynamic : Brightness is emphasised, so that images are 
fresher and have greater modulation than in 
Presentation mode.
Presentation : Brightness is emphasised to produce images 
that are ideal for presentations.
Theatre : Images are optimised using natural tints. It  emphasises colour gradations (differences 
between light and dark) when projecting 
images that are very dark or very light and 
bright, to make such images easier to see.
Living Room: Brightness is  emphasised to produce images 
that are ideal for projecting TV images, etc. 
in bright rooms.
 sRGB
: Images conform to the sRGB standard.
If set to sRGB, the  Abs. Color Temp.
 for 
the Color Adjustment command in the 
Advanced menu will be set to 6500K.
Blackboard : Images with natural tints can be obtained  when projecting onto a blackboard (green).
Presentation
Input 
Signal
Selects the input signal in accordance with the source being 
used.
The default setting varies according to the signal input 
source.
If signals from the [Computer1/Component Video1] port are 
being input: Computer1
If signals from the [Computer2/Component Video2] port are 
being input: Computer2 When projecting computer or RGB video images, select  Computer1 or Computer2.
Depends on 
input source
Auto Setup
Selects whether the automatic adjustment function for 
automatically optimising images when the input source is 
changed is turned ON or OFF.
ON
Sub-menu
Function
Default 
						

							53
Using the Configuration Menu Functions
Using the Configuration Menu Functions
Reset
Resets all adjustment values for the Image menu functions 
except for the Input Signal setting to their default settings. Press the [Enter] button on the remote control to reset the  settings.
 Select Reset All to return all settings for menus such as  Image and Audio to  their default settings. 
 p.65
-
Sub-menu
Function
Default 
						

							54
Using the Configuration Menu Functions
Using the Configuration Menu Functions
Component video
 (YCbCr
, YPbPr
)
Video ( Composite video
, S-Video
)
Sub-menu
Function
Default
Position
Moves the image display positi on vertically and horizontally.
 Press the [Enter] button and make the adjustment using the  display position adjustment  sub-menu that appears.
Depends on 
connection
Brightness
Adjusts the image brightness.
Median value 
(0)
Contrast
Adjusts the difference between light and shade in the images.
Median value 
(0)
Color
(Not available for RGB video)
Adjusts the colour intensity for the images.
Median value 
(0)
Tint
(Not available for RGB video)
(Adjustment is only possible when  component video
 or 
NTSC signals are being input.) 
Adjust the image tint.
Median value 
(0)
Sharpness
Adjusts the image sharpness.
Median value 
(0) 
						

							55
Using the Configuration Menu Functions
Using the Configuration Menu Functions
Color 
Mode
Corrects the vividness of the image colour. The settings can 
be saved separately for each type of source (computer or 
video source). You can select from six different quality 
settings depending on the surroundings. Dynamic : Brightness is emphasised, so that images are 
fresher and have greater modulation than in 
Presentation mode.
Presentation : Brightness is emphasised to produce images 
that are ideal for presentations.
Theatre : Images are optimised using natural tints. It  emphasises colour gradations (differences 
between light and dark) when projecting 
images that are very dark or very light and 
bright, to make such images easier to see.
Living Room: Brightness is  emphasised to produce images 
that are ideal for projecting TV images, etc. 
in bright rooms.
 sRGB
: Images conform to the sRGB standard.
If set to sRGB, the  Abs. Color Temp.
 for 
the Color Adjustment command in the 
Advanced menu will be set to 6500K.
Blackboard : Images with natural tints can be obtained  when projecting onto a blackboard (green).
Dynamic
Input 
Signal
(Adjustment is only possible when component video signals 
are being input.) 
Selects the input signal in accordance with the source being 
used.
The default setting varies according to the signal input 
source.
If signals from the [Computer1/Component Video1] port are 
being input: Computer1
If signals from the [Computer2/Component Video2] port are 
being input: Computer2
Depends on 
input source
Sub-menu
Function
Default 
						

							56
Using the Configuration Menu Functions
Using the Configuration Menu Functions
Vi d e o  
Signal
(Adjustment is only possible when composite video/S-Video 
signals are being input.)
Sets the video signal format.  Press the [Enter] button on the remote control, and choose  the setting from the video signal format selection sub-menu 
which appears.
 When set to Auto, the video signal format is set  automatically.
Auto
Aspect Ratio
Sets the aspect ratio for projected images.
Depends on 
connection 
Reset
Resets all adjustment values for the Image menu functions 
except for the Input Signal and Video Signal setting to 
their default settings. Press the [Enter] button on the remote control to reset the  settings.
 Select Reset All to return all settings for menus such as  Image and Audio to  their default settings.    p.65
-
Sub-menu
Function
Default 
						

							57
Using the Configuration Menu Functions
Using the Configuration Menu Functions
Audio Menu
Sub-menu
Function
Default
Volume
Adjusts the volume.
Median value 
(10)
Audio 
Input
Selects the input source (port) for audio signals at the rear of 
the projector.
The default setting varies de pending on the type of signal 
being input (for computer, RGB video and component video 
input signals: Audio1; for vide o and S-Video input signals: 
Audio2) Therefore, if audio  signals are being input to a 
different port from the default port, you will need to select 
the audio signal input source.
Depends on 
connection 
Reset
Resets all adjustment values  for the Audio menu functions 
to their default settings.  Press the [Enter] button on the remote control to reset the  settings.
 Select Reset All to return all settings for menus such as  Image and Audio to  their default settings.    p.65
-
TIP
The Audio menu settings are saved individually for each input signal source. 
						

							58
Using the Configuration Menu Functions
Using the Configuration Menu Functions
Setting Menu
Sub-menu
Function
Default
Keystone
Corrects vertical keystone distortion in images. When keystone correction is carried out, the projected  image will become smaller.
 If the images become uneven in appearance after keystone  correction is carried out, decrease the sharpness setting.
Median value 
(0)
Auto 
Keystone
Sets the function for automatically detecting the projector 
angle and correcting keystone ON or OFF when the 
projector is tilted vertically.
This function is only enabled when the Projection 
command in the Advanced menu is set to Front. If it is 
set to something other than Front, this menu cannot be 
selected.
ON
Message
Sets whether display of the following messages is turned 
ON or OFF. Signal name when the video signal is switched
 Colour mode name when th e colour mode is switched
 When no image signals are being input
 When an incompatible signal is input
 When the air filter needs replacing
ON
Back-
ground 
Color
Sets the screen status when the [A/V Mute] button on the 
remote control is being pressed or when no image signals are 
being input to Black, Blue or Logo.  To change the users logo, you need to record your own  logo.   p.90
 If the Users Logo Protect function of Password Protect  has been set to ON, the Logo setting cannot be changed 
from Logo to Black or Blue, or from Black or 
Blue to Logo. Cancel the Password Protect function 
before changing these settings.    p.29
Blue
Sleep 
Mode
Sets the energy saving operation when no signal is being 
input.
 When set to ON, projection stops automatically and then  after the  cool-down
 period is finished, the projector 
changes to sleep mode if no operations are carried out for 
30 minutes while the No Signal. message is being 
displayed. (The Power indicator lights orange.)
 Projection starts again when the [Power] button is pressed.
OFF 
						

							59
Using the Configuration Menu Functions
Using the Configuration Menu Functions
Reset
Resets all adjustment values for the Setting menu functions 
to their default settings.
However, if Background Color has been set to Logo, the 
setting cannot be returned to the default setting if the User’s 
Logo Protect function of Passwo rd Protect has been set to 
ON.  Press the [Enter] button on the remote control to reset the  settings.
 Select Reset All to return all settings for menus such as  Image and Audio to  their default settings. 
 p.65
-
Sub-menu
Function
Default