Epson Projector Emp 505 User Manual

 Viewing EasyMP files - 79 EMP-715/505E  software.fm
3Press the [ESC] button when the preview is being displayed.
The preview will end and the screen will return to the list of files.
 Functions available on the file list display screen
[Execute] Shows a preview of the selected file. When a folder has been selected, the files con-
tained within that folder will be displayed.
[Preview]
 (see page 80
)When a scenario folder has been selected, a preview of the scenario image files con-
tained in that...

80 - Viewing EasyMP filesEMP-715/505E  software.fm
Po i n t
It is possible to browse through the memory card from a computer that has a USB connec-
tion when the file list is being displayed. (see page 94
)
 List preview for each folder
It is possible to show a preview list of files contained within a folder with the file list display.
1Align the cursor with the required folder, and then press the [Esc] button.
The folder will remain selected and the menu on the left-hand side will be enabled for use....

 Viewing EasyMP files - 81 EMP-715/505E  software.fm
 Setting up the display conditions
This sets up the list preview and scenario playback display conditions.
1Align the cursor with the required folder or scenario, and then press the [Esc] button.
The folder or scenario will remain selected and the menu on the left-hand side will be 
enabled for use.
2Align the cursor with [Options], and then press the [Enter] button.
The display condition setup screen will be displayed.
3Set up the relevant items...

82 - Operating scenariosEMP-715/505E  software.fm

Operating scenarios
It is possible to play back scenarios stored in the memory card.
Playing back scenarios
1Press the [EasyMP] button on the remote control to switch across to EasyMP images.
The projected image will switch across to a list of EasyMP files, and the contents of the 
memory card will be displayed.
Po i n t
·Create scenarios with the special [EasyMP Software] software beforehand on the com-
puter in use. (see page 87
)
·Scenario files that...

 Operating scenarios - 83 EMP-715/505E  software.fm
Po i n t
·The playback conditions must be set at the time of creation, but the playback sequence 
and display/non-display parameters can be amended with the [Edit Scenario] button. (see 
page 83)
·A confirmation message will be displayed when the [Easy/MP] button is pressed during 
scenario playback. Press the [Enter] button one more time to end playback.
Editing scenarios
1Align the cursor with the required scenario file on the file list display, and...

84 - Operating scenariosEMP-715/505E  software.fm
3Perform the following procedure to amend the sequence.
(1) Align the cursor with the screen to be moved, and then press the [Enter] button.
(2) Align the cursor with the place the screen is to be moved to, and then press the [Enter] 
button.
4Perform the following procedure to prevent a selected screen from not being displayed 
during playback.
(1) Align the cursor with the screen that is not to be displayed, and then press the [Esc] 
button.
(2) Align...

 Operating scenarios - 85 EMP-715/505E  software.fm
5Align the cursor with [Return] and then press the [Enter] button.
The results of editing will be automatically saved in the scenario, and the screen will 
return to the list of files.
Select [Cancel] if the details are not to be saved.
Po i n t
The scenario will be played back with the edited conditions when [Execute] is selected.The 
results of editing will be automatically saved in this case.
Select
715_505E.bk  Page 85  Friday, May 25, 2001  10:24 AM 

86 - Creating scenariosEMP-715/505E  software.fm

Creating scenarios
Scenarios are created with the special [EasyMP software] software.
Install the EasyMP Software
 Operating environment
Check to ascertain that this software can be operated on the computer in use.
 Installation
Windows 98 screens are used here for explanatory purposes, but the procedures are the same 
with Windows 95.
1Start up Windows and set the EasyMP Software CD-ROM in place.
The set-up program will automatically start.
Po i n t
If...

 Creating scenarios - 87 EMP-715/505E  software.fm
Creating scenarios
It is possible to create image scenarios that combine several Microsoft PowerPoint (97 or above) 
and image files for presentation purposes with the use of [EasyMP Software].
Po i n t
·Supports both PowerPoint 97 (SR-1 or higher) and PowerPoint 2000 (PowerPoint 2000 is 
recommended).
·Ensure that the PowerPoint data and image files to be used have already been created.
·The animation effects set up with PowerPoint will be disabled. If...

88 - Creating scenariosEMP-715/505E  software.fm
4Specify the document folder to be added to the scenario with the folder window on the 
left.
A list of files will be displayed in the file window at the bottom left-hand side of the 
screen.
When PowerPoint files have been selected, each page will be displayed in thumbnail win-
dows.
Po i n t
Only thumbnails that have been created with PowerPoint 97 or above can be displayed. 
Display is also not possible if PowerPoint has not been installed on the...