Epson Projector Emp 505 User Manual
Here you can view all the pages of manual Epson Projector Emp 505 User Manual. The Epson manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 91
![Page 91
Creating scenarios - 89 EMP-715/505E software.fm
6Follow the same procedure to add required items to the scenarios.
When it is necessary to switch across to other source images, such as computer images or
video images, during the scenario playback, click on the right-hand mouse button at the
relevant line and specify [Source Control] to insert a control line that will switch the dis-
play. The PC (computer images) will be displayed when inserted, but this can be amended
with the [Cell Property]...](http://img.usermanuals.tech/thumb/23/89183/w300_epson-emp-505-manual_d-90.png "Page 91
Creating scenarios - 89 EMP-715/505E software.fm
6Follow the same procedure to add required items to the scenarios.
When it is necessary to switch across to other source images, such as computer images or
video images, during the scenario playback, click on the right-hand mouse button at the
relevant line and specify [Source Control] to insert a control line that will switch the dis-
play. The PC (computer images) will be displayed when inserted, but this can be amended
with the [Cell Property]...")
Creating scenarios - 89 EMP-715/505E software.fm 6Follow the same procedure to add required items to the scenarios. When it is necessary to switch across to other source images, such as computer images or video images, during the scenario playback, click on the right-hand mouse button at the relevant line and specify [Source Control] to insert a control line that will switch the dis- play. The PC (computer images) will be displayed when inserted, but this can be amended with the [Cell Property]...
Page 92
![Page 92
90 - Creating scenariosEMP-715/505E software.fm
Po i n t
·It is possible to select the switching source when control lines have been inserted with the
source switching function.
·It is possible to set effect functions to be enabled during playback by clicking on the right-
hand mouse button and specifying [Cell Effect]. The effect functions are activated with
buttons [1] to [5] on the remote control.
·When rearranging the order of the scenario, drag the relevant lines on the scenario win-
dow.
·When...](http://img.usermanuals.tech/thumb/23/89183/w300_epson-emp-505-manual_d-91.png "Page 92
90 - Creating scenariosEMP-715/505E software.fm
Po i n t
·It is possible to select the switching source when control lines have been inserted with the
source switching function.
·It is possible to set effect functions to be enabled during playback by clicking on the right-
hand mouse button and specifying [Cell Effect]. The effect functions are activated with
buttons [1] to [5] on the remote control.
·When rearranging the order of the scenario, drag the relevant lines on the scenario win-
dow.
·When...")
90 - Creating scenariosEMP-715/505E software.fm Po i n t ·It is possible to select the switching source when control lines have been inserted with the source switching function. ·It is possible to set effect functions to be enabled during playback by clicking on the right- hand mouse button and specifying [Cell Effect]. The effect functions are activated with buttons [1] to [5] on the remote control. ·When rearranging the order of the scenario, drag the relevant lines on the scenario win- dow. ·When...
Page 93
![Page 93
Creating scenarios - 91 EMP-715/505E software.fm
Transmitting scenarios
It is necessary to transmit created scenarios to the memory card for projection purposes.
1Set the memory card in the computer.
Set the memory card in a card adapter if necessary.
2Specify [Scenario Option] - [Send Scenario].
The forward scenario dialog box will be displayed.
3Specify the drive in which the memory card is set, and then click on the [OK] button.
A confirmation message will be displayed.
4Click on the [OK] button....](http://img.usermanuals.tech/thumb/23/89183/w300_epson-emp-505-manual_d-92.png "Page 93
Creating scenarios - 91 EMP-715/505E software.fm
Transmitting scenarios
It is necessary to transmit created scenarios to the memory card for projection purposes.
1Set the memory card in the computer.
Set the memory card in a card adapter if necessary.
2Specify [Scenario Option] - [Send Scenario].
The forward scenario dialog box will be displayed.
3Specify the drive in which the memory card is set, and then click on the [OK] button.
A confirmation message will be displayed.
4Click on the [OK] button....")
Creating scenarios - 91 EMP-715/505E software.fm Transmitting scenarios It is necessary to transmit created scenarios to the memory card for projection purposes. 1Set the memory card in the computer. Set the memory card in a card adapter if necessary. 2Specify [Scenario Option] - [Send Scenario]. The forward scenario dialog box will be displayed. 3Specify the drive in which the memory card is set, and then click on the [OK] button. A confirmation message will be displayed. 4Click on the [OK] button....
Page 94
![Page 94
92 - Creating scenariosEMP-715/505E software.fm
5Click on the [Yes] button.
Click on the [Yes] button and proceed onto the following procedures if the auto-run and
repeat functions are to be set.
Click on [No] if these function do not need to be set. Operations will be ended if [No] is
clicked.
6Amend the settings and then click on the [OK] button.
When the auto-run parameter is to be set, select the relevant scenario from the box on the
left-hand side, and then click on the [>>] button.
The...](http://img.usermanuals.tech/thumb/23/89183/w300_epson-emp-505-manual_d-93.png "Page 94
92 - Creating scenariosEMP-715/505E software.fm
5Click on the [Yes] button.
Click on the [Yes] button and proceed onto the following procedures if the auto-run and
repeat functions are to be set.
Click on [No] if these function do not need to be set. Operations will be ended if [No] is
clicked.
6Amend the settings and then click on the [OK] button.
When the auto-run parameter is to be set, select the relevant scenario from the box on the
left-hand side, and then click on the [>>] button.
The...")
92 - Creating scenariosEMP-715/505E software.fm 5Click on the [Yes] button. Click on the [Yes] button and proceed onto the following procedures if the auto-run and repeat functions are to be set. Click on [No] if these function do not need to be set. Operations will be ended if [No] is clicked. 6Amend the settings and then click on the [OK] button. When the auto-run parameter is to be set, select the relevant scenario from the box on the left-hand side, and then click on the [>>] button. The...
Page 95
Connecting up computer with USB cables - 93EMP-715/505E software.fm Connecting up computer with USB cables By connecting the computer and projector together with an USB cable, it is possible to view the contents of the memory card inserted in the projector from the computer. Po i n t The computers that can be connected to the projector with a USB connection and used are restricted to those that operate on the Windows 98, Me and 2000 platforms. Install the USB driver into the computer to be used if...
Page 96
![Page 96
94 - Connecting up computer with USB cablesEMP-715/505E software.fm
3The [Add New Hardware Wizard] and the setup program can be ended with [Cancel].
4Open the [Specify and Execute File Name] dialog box with [Start] - [Specify and Exe-
cute File Name].
5Enter [CD-ROM drive name:\USB-Driver\Win98\language\Disk1\Setup] in the
[Open] field, and then click on [OK].
Installation will commence. Proceed with all subsequent procedures by observing the on-
screen instructions.
Po i n t
Execute [Program Files\EMP...](http://img.usermanuals.tech/thumb/23/89183/w300_epson-emp-505-manual_d-95.png "Page 96
94 - Connecting up computer with USB cablesEMP-715/505E software.fm
3The [Add New Hardware Wizard] and the setup program can be ended with [Cancel].
4Open the [Specify and Execute File Name] dialog box with [Start] - [Specify and Exe-
cute File Name].
5Enter [CD-ROM drive name:\USB-Driver\Win98\language\Disk1\Setup] in the
[Open] field, and then click on [OK].
Installation will commence. Proceed with all subsequent procedures by observing the on-
screen instructions.
Po i n t
Execute [Program Files\EMP...")
94 - Connecting up computer with USB cablesEMP-715/505E software.fm 3The [Add New Hardware Wizard] and the setup program can be ended with [Cancel]. 4Open the [Specify and Execute File Name] dialog box with [Start] - [Specify and Exe- cute File Name]. 5Enter [CD-ROM drive name:\USB-Driver\Win98\language\Disk1\Setup] in the [Open] field, and then click on [OK]. Installation will commence. Proceed with all subsequent procedures by observing the on- screen instructions. Po i n t Execute [Program Files\EMP...
Page 97
Connecting up computer with USB cables - 95EMP-715/505E software.fm 3Select the added drive. All subsequent operations are the same as Windows file operations. Po i n t ·You cannot connect to Macintosh. Do not transfer or connent to Macintosh, as it might cause a data crush. ·Projector memory card operations from a connected computer are only possible when the projector display is displayed as a file list. ·Operations are not possible when the projectors memory card is being accessed. Pay attention...
Page 98
96 - TroubleshootingEMP-715/505E trouble.fm Troubleshooting This section provides explanations on potential problems and the methods of taking care of them. Troubleshooting When you think you have a problem, first of all check the Indicators on the projector. The projector is fitted with Operation Indicator, Lamp Indicator and Temperature Indicator to advise the user of the projector’s status. Operation Indicator Indicator StatusCauseRecovery or StatusReference Page Illuminated in...
Page 99
Troubleshooting - 97 EMP-715/505E trouble.fm Lamp Indicator Blinking in GreenWa r m - u p i n progress(Not an error) ·Wait for a moment. ·The green lamp will stop blinking and become illuminated once the warm-up procedure has been completed.37 Blinking in Red Internal error Cease operations, remove the Power Plug from the socket and contact your dealer or nearest address provided at page 121 and request repairs. Extinguished The power is not switched onThe power is not switched on. ·Check...
Page 100
![Page 100
98 - TroubleshootingEMP-715/505E trouble.fm
Temperature Indicator
Po i n t
·Refer to the section on [When the Indicators Provide No Help] on the following page if the
Indicators appear normal but the projected image is defective.
·Contact your dealer or nearest address provided at page 121 if an Indicator status not
covered by the above table is apparent.
Indicator StatusCauseRecovery and StatusReference
Page
Illuminated in
RedExcessive internal
temperature
(overheating)The lamp goes off...](http://img.usermanuals.tech/thumb/23/89183/w300_epson-emp-505-manual_d-99.png "Page 100
98 - TroubleshootingEMP-715/505E trouble.fm
Temperature Indicator
Po i n t
·Refer to the section on [When the Indicators Provide No Help] on the following page if the
Indicators appear normal but the projected image is defective.
·Contact your dealer or nearest address provided at page 121 if an Indicator status not
covered by the above table is apparent.
Indicator StatusCauseRecovery and StatusReference
Page
Illuminated in
RedExcessive internal
temperature
(overheating)The lamp goes off...")
98 - TroubleshootingEMP-715/505E trouble.fm Temperature Indicator Po i n t ·Refer to the section on [When the Indicators Provide No Help] on the following page if the Indicators appear normal but the projected image is defective. ·Contact your dealer or nearest address provided at page 121 if an Indicator status not covered by the above table is apparent. Indicator StatusCauseRecovery and StatusReference Page Illuminated in RedExcessive internal temperature (overheating)The lamp goes off...