Epson Projector Emp 505 User Manual

 Menu Operations - 69 EMP-715/505E  menu.fm
Image capture
The image currently being displayed will be saved onto the memory card.
1Displays the images that are to be captured.
2Press the [Menu] button and then select [Capture] - [Image Capture].
A confirmation screen will be displayed.
3Select [Yes] and then press the [Enter].
A screen to reconfirm the image to be registered will be displayed.
4Select [Yes] and then press the [Enter].
The image will be saved. Wait for a moment until the saving completion...

70 - Menu OperationsEMP-715/505E  menu.fm
Po i n t
·A certain amount of time is required for the saving process. Do not operate the projector 
or connected equipment while saving is in progress. Failure to observe this may result in 
defects.
·Images cannot be saved if the memory card has not been inserted.
·Do not remove the memory card while images are being saved.
·A [Capture] folder will be created on the memory card when an image has been captured, 
and the contents of that screen will be saved in...

 Menu Operations - 71 EMP-715/505E  menu.fm
User logo registration
Registers the images currently displayed as the user logo.
1Displays the image that is to be registered as the user logo.
2Press the [Menu] button and select [Capture]-[User ’s Logo Capture].
A confirmation screen will be displayed.
3Select [Yes] and then press the [Enter].
A screen to save will be displayed.
4Adjust the position of the image then press the [Enter].
A confirmation screen will be displayed.
Video
Audio
Effect
Setting...

72 - Menu OperationsEMP-715/505E  menu.fm
5Select [Yes] and then press the [Enter].
The enlargement/reduction screen will be displayed.
6Select the enlargement/reduction rate and then press the [Enter].
A screen to confirm saving will be displayed.
7Select [Yes] and then press the [Enter].
The image will be saved. Wait for a moment until the saving completion screen is dis-
played.
Po i n t
·A certain amount of time is required for the saving process. Do not operate the projector 
or connected equipment...

 Function description - 73 EMP-715/505E  software.fm
Using the EasyMP Function
This section provides explanations on the EasyMP functions that enable the contents of memory cards to be confirmed and scenarios to be created and played back.

Function description
The following functions are available for use with EasyMP
 Image capturing
It is possible to save projected computer 
images and video images onto a memory 
card in the jpg format.
 Browsing memory card files
It is possible to display a list of...

74 - Inser ting the memory cardEMP-715/505E  software.fm

Inserting the memory card
A memory card is required when using the EasyMP functions.
 Memory cards that can be used
The following memory cards which are compatible with the Type II ATA standard can be used.
·Compact flash (a PC card adapter is required during mounting)
·Smart media (a PC card adapter is required during mounting)
·Memory stick (a PC card adapter is required during mounting)
·ATA  f l a s h  c a r d
·Micro drive (a PC card adapter...

 Inser ting the memory card - 75EMP-715/505E  software.fm
 Removing the card
Po i n t
·Do not remove the memory card when the access lamp is illuminated in orange, or when 
scenarios are being played back.
·Replace the memory card with a dummy card to prevent dust and dirt from entering the 
slot.
1Press the button on the left-hand side of the PCMCIA card slot.
The button will protrude.
2Press the button on the left-hand side of the PCMCIA card slot once more time.
The memory card will be pushed out....

76 - Viewing EasyMP filesEMP-715/505E  software.fm

Viewing EasyMP files
It is possible to view the folders and files stored on the memory card with EasyMP.
It is possible to display a list of files contained within the memory card inserted in the projector, 
and enlarge each image for confirmation purposes (preview).
The preview function can be used on the following image formats:
·jpg files saved with the capture function.
·jpg files saved during scenario creation.
·SXGA (1024 x 1280) or lower bitmap...

 Viewing EasyMP files - 77 EMP-715/505E  software.fm
Switching projected images across to EasyMP
1Press the [EasyMP] button on the remote control.
The projected image will switch across to a list of EasyMP files, and the contents of the 
memory card will be displayed.
Po i n t
·A message stating [No Memory Card] will be displayed when no memory card has been 
inser ted. The EasyMP functions cannot be used in this event.
·Scenario files that have been saved on the memory card as auto-run files will be...

78 - Viewing EasyMP filesEMP-715/505E  software.fm
Operations on the file list display
 Basic operations
The contents of folders and files can be verified with the EasyMP file list display function. The 
required folder or file is selected with the [Enter] button on the remote control.
1Align the cursor with the required folder, and then press the [Enter] button.
The files contained within that folder will be displayed.
2Align the cursor with the required file, and then press the [Enter] button.
This...