Epson Projector Emp 505 User Manual

 Connecting the projector to a computer - 29EMP-715/505E  Connections.fm
Connecting external audio equipment
It is possible to enjoy dynamic sound by connecting the Audio Out port on the projector to a 
PA system, an active speaker system, or other speakers equipped with built-in amplifiers.
Use audio connection cables available on the open market (pin plug  3.5mm stereo mini-
jack plug).
Po i n t
·The sound will be output externally if a stereo mini-jack is inserted into the Audio Out port. 
The sound...

30 - Connecting the projector to a computerEMP-715/505E  Connections.fm
Connecting up the mouse (wireless mouse function)
This enables the computer’s mouse pointer to be operated with the remote control in the same 
way as a wireless mouse.
Connect the computers mouse port to the projectors Mouse/Com port or USB mouse port 
with the mouse cable.
PS/2 mouse connection
USB mouse connention
Refer to the above table before making your selection.
Po i n t
·Only the USB standard mounted model suppor ts USB...

 Connecting the projector to a computer - 31EMP-715/505E  Connections.fm
Perform the following mouse operations after the connection has been established:
Left click  - - - - - - - - - - - - - - - Press the [Enter] button.
Right click  - - - - - - - - - - - - - - Press the [Esc] button.
Mouse pointer movement - - - Lower the remote control [Enter] button.
Po i n t
·The operations will be reversed if the left/right button functions of the mouse pointer have 
been amended with the computer.
·The mouse...

32 - Connecting the video equipmentEMP-715/505E  Connections.fm




 
Connecting the video equipment
Switch off the power supply to the projector and video equipment prior to attempting to 
make the connection.
Po i n t
The sound for the selected image will be output.
In the case of composite image signals
·Connect the video port, the projectors video port and the L-Audio-R port with the RCA 
Audio Cable (red/white/yellow) supplied.
In the case of S image signals
·Connect the projector’s S-Video port to...

 Connecting the video equipment - 33EMP-715/505E  Connections.fm
In the case of component (color differential*) image signals
·Connect the video equipment to the projectors Computer/Component Video port with the 
optional component video cable (ELPKC19.)
·Connect the L-Audio-R ports with the RCA audio cable supplied (red/white/yellow) to out-
put sound from the projectors speakers.
Po i n t
Set the input signal parameter on the image menu to [YCbCr] or [YPbPr] in accordance 
with the equipments signals...

34 - Connecting the video equipmentEMP-715/505E  Connections.fm
In the case of the digital tuners D output port
·Connect the digital tuner to the projectors Computer/Component Video port with the 
optional D port cable (ELPKC22).
·Connect the L-Audio-R ports with the RCA audio cable supplied (red/white/yellow) to out-
put sound from the projectors speakers.
Po i n t
·Set the image menus input signals to either [YCbCr] or [YPbPr] in accordance with the 
equipment being used when establishing the...

 Projection - 35 EMP-715/505E  projection.fm
Projecting
This section provides explanations on starting and ending projection, and on the basic functions for adjusting projected images.




 
Projection
Images can be projected after all connections have been completed.
Preparations
1Connect the projector to a computer and video equipment. (see page 25, 32)
2Rotate the zoom lever to the central position to extend the lens.
Images will be out of focus when projected if the zoom lever is not moved to the...

36 - ProjectionEMP-715/505E  projection.fm
4Attach the supplied Power Cord to the projector.
Check to confirm the shape of the projector’s Power Inlet and Power Connector, align the 
connector in the correct direction, and then insert it as far as it will go.
5Plug the Power Plug into the power socket.
The Operation Indicator will be illuminated in orange.
Po i n t
Button operations are not possible when the Operation Indicator is blinking in orange.
Power Inlet
Power Connector
Power Cord
Illuminated in...

 Projection - 37 EMP-715/505E  projection.fm
Commencing projection
1Press the [Power] button to turn on the power supply.
The Operation Indicator will begin to blink in green, and projection will be started.
The operation indicator will change from blinking to being illuminated in green after a 
while.
Po i n t
Button operations are not possible when the Operation Indicator is blinking in green.
2Open the remote control cover when a remote control is to be used.
Power
Freeze
A/V MuteE-ZoomR/C ON
OFF3...

38 - ProjectionEMP-715/505E  projection.fm
3Select the Port to which the connection has been made when more than one item of
 equipment has been connected.
Press the port button connected to the computer or video equipment to switch the input 
source.
Po i n t
·Projection will take place without pressing the button if only one item of equipment is con-
nected.
·It is not possible to switch across to S-Video with the [Source] button when no S-Video 
input exists.
·It is not possible to switch across to...