Epson Projector Emp 505 User Manual

 Safety Precautions - 9 EMP-715/505E  safe.fm
Never look into the lens when the power is switched on.
An extremely strong light is emitted that may cause sight defects. 
Special attention must be paid by households with children.
Take care when handling power plugs and power connectors.
Failure to observe these instructions may result in the outbreak of fire 
or electric shocks.
Observe the following precautions when handling power plugs and 
power connectors.
·Never connect too many appliances to a...

10 - Safety PrecautionsEMP-715/505E  safe.fm
Caution
Never stand on the projector or place any heavy objects on it.
Failure to observe this may result in it dropping over, becoming dam-
aged, or causing injury.
Never place the projector on unstable surfaces, such as wobbly 
tables or slanted surfaces.
Failure to observe this may result in it dropping over, becoming dam-
aged, or causing injury.
Do not place or store the projector within the reach of children’s 
hands. 
Failure to observe this may...

 Safety Precautions - 11EMP-715/505E  safe.fm
Always ensure that the power has been switched off, the plug 
has been disconnected from the power socket, and all other 
cables have been disconnected when moving the projector.
Failure to observe this may result in the outbreak of fire or electric 
shocks.
Never attempt to remove the lamp immediately after the projec-
tor has been used. Wait for the projector to cool down suffi-
ciently by leaving it for at least sixty minutes after the power 
supply has...

12 - Safety PrecautionsEMP-715/505E  safe.fm
Safety Precautions
Using the projector outside of the permissible temperature range (+5C° to +35C°) 
may result in unstable display and excessive loads being placed on the fan, lead-
ing to damage to the equipment.
Storing the projector outside of the permissible temperature range (-10C° to 
+60C°) may result in damage of the case. Take special care to avoid placing the 
equipment in direct sunlight for a long period of time.
Do not use the projector with...

 Parts, Names and Operations - 13EMP-715/505E  intro.fm
Before Using This Equipment
This section provides explanations on parts and part names, and the items that should be verified before operating the remote control.




 
Parts, Names and Operations
Projector
 Front Panel
 1 Operation Panel
 2 Operation Indicator
 3 Lamp Indicator
 4 Temperature Indicator
 5 Air Filter (ventilation inlet)
 6 Speaker
 7 PCMCIA Card Access Lamp
 8 PCMCIA Card Slot
 9 Foot Adjust Lever
10 Front Foot
11 Ventilation...

14 - Parts, Names and OperationsEMP-715/505E  intro.fm
 Rear surface, Side surface
 1 Power Inlet
 2 Mouse/Com Port
 3 USB Port
 4 I/O Port
 Rear Panel
 1 Front Foot
 2 Rear Foot
 3 Lamp Cover
1
2
4
3
12
3
715_505E.bk  Page 14  Friday, May 25, 2001  10:24 AM 

 Parts, Names and Operations - 15EMP-715/505E  intro.fm
 Operation panel (on top of the projector)
 1 [Power] button (see page 37, 40 )
Switches the power supply on and off.
·Press twice to switch off the power supply.
 2 [Help] button (see page 49)
Displays the methods of solving problems. Press this button when trouble occurs.
 3 [Source] (Enter) button (see page 38, 50)
·The projected images will be switched sequentially between Computer (component) --> 
S-Video --> Composite Video --> EasyMP....

16 - Parts, Names and OperationsEMP-715/505E  intro.fm
 I/O Ports
 1 Computer / Component Video Port
Inputs computer analog image signals and AV equipment component image signals.
 2 Audio In Port
Inputs the sound signals from equipment connected to the Computer #1 port. Use a stereo 
mini-jack when making the connection.
 3 Audio Out Port
Outputs the projectors sound signals.
·The sound will no longer be output from the projectors speakers when a stereo mini-jack 
is connected here.
 4 S-Video Port...

 Parts, Names and Operations - 17EMP-715/505E  intro.fm
Remote Control
 Front Panel
 1 Remote control light-receiving area
Outputs the remote control unit’s signals.
 2 Indicator
Illuminated when the remote control unit signals are being output.
·Light will not be emitted when the batteries are getting low or when the [R/C ON OFF] 
switch is set at [OFF].
 3 [Freeze] button (see page 51)
Temporarily freezes the image. Press this button once more to cancel the freeze mode.
 4 [A/V Mute] button (see page...

18 - Parts, Names and OperationsEMP-715/505E  intro.fm
10 [Enter] button (see page 31, 63)
·Sets the menu item when pressed, and then moves onto the lower stage. Becomes a cur-
sor key to select the menu items when moved up, down, left or right.
·This function operates as a left-hand click on the mouse when computer images are being 
projected. The pointer will move when this button is moved up, down, left or right.
11 [Esc] button (see page 31, 64)
·Ends the function being used. Returns to the previous...