Epson Projector Emp 505 User Manual

 When the Indicators Provide No Help - 99EMP-715/505E  trouble.fm




 
When the Indicators Provide No Help
Refer to each relevant item if the following situations arise but the indicators provide no help.
·The image is not projected page 99
·No sound page 106
·The image is unclear page 103
·The remote control will not work page 106
·The image is cut up (Large)/Small page 104
·Cannot end page 107
·The image color is bad page 105
·The image is dark page 105
The image is not projected
 Nothing is...

100 - When the Indicators Provide No HelpEMP-715/505E  trouble.fm
 Messages
[Not Supported] 
will be displayed
[No Signal]
will be displayed
Is the resolution of the image signal output from the computer 
higher than UXGA (1,600 x 1,200)?
see page 26
Check to ensure that the mode supports the frequency of the image 
signals output from the computer.
Refer to the computer’s instruction manual to discover how to amend 
the resolution and frequency of the image signals output from the 
computer.
see page...

 When the Indicators Provide No Help - 101EMP-715/505E  trouble.fm
A message stating 
[No displayable 
files] will be 
displayed.
Have displayable files be saved onto the memory card?
The files that can be displayed with EasyMP are scenario files (.sit), 
jpeg files (.jpg) and bitmap files (,bmp). Other files will not be 
recognized.
·Although files with a log extension of .jpeg are recognized on the 
Widows platform as jpeg files, they are not recognized by EasyMP. 
Amend the log extension to .JPG or...

102 - When the Indicators Provide No HelpEMP-715/505E  trouble.fm
A message stating 
[File cannot be 
saved] will be 
displayed.
Is the memory card full?
If there is no more space left to save files, increase the capacity of the 
memory card by deleting other files.
A message stating 
[Capture failed] 
will be displayed.
Was an image captured while the computer was connected with a 
USB connection?
It is not possible to capture images when a USB connection is in use. 
Disconnect the USB cable....

 When the Indicators Provide No Help - 103EMP-715/505E  trouble.fm
The image is unclear
·The screen is 
blurred.
·Focus can only be 
attained in certain 
areas.
Has the lens been stored in the projector?
Images will be out of focus if the position of the zoom lever is outside 
of the [W] to [T] range. Ensure that the lever is set within the [W] to 
[T] range.
Has the focus been set correctly?
see page 46
Has the projection angle been increased by adjusting the feet?
There are cases where the vertical...

104 - When the Indicators Provide No HelpEMP-715/505E  trouble.fm
The image is cut up (Large)/Small
·The image is 
disturbed.
·Noise appears
Has the cable been connected correctly?
see page 25, 32Is the selected resolution correct?
Align the computer with the signals supported by the projector. Refer 
to the computer’s instruction manual for details on how to amend the 
signals.
see page 26
Have the [Synchronization *, Tracking *, Display Position] settings 
been correctly adjusted.
Press the [Auto]...

 When the Indicators Provide No Help - 105EMP-715/505E  trouble.fm
The image color is bad
The image is dark
Has the image brightness been correctly adjusted?
see page 65
Have the cables been connected correctly?
see page 25, 32
Has the contrast been correctly adjusted?
see page 65
Has the color setting been correctly adjusted?
see page 68
Have the color density and tint been correctly adjusted?
(The display on the computer monitor or  the liquid crystal screen will 
not always match up with the tint...

106 - When the Indicators Provide No HelpEMP-715/505E  trouble.fm
No sound
The remote control will not work
Has the sound input been connected correctly?
see page 28
, 32Has the image for which sound is required been selected?
see page 38
Has the volume been set to the minimum?
see page 60
Is sound being emitted from connected equipment?
Confirm the sound from connected equipment, etc.
Has the volume been turned right down?
Has the [A/V Mute] function been left on?
There is a possibility that the...

 When the Indicators Provide No Help - 107EMP-715/505E  trouble.fm
The projector will not switch off (after the [Power] button has 
been pressed)
Problems with EasyMP images
Problems when using the EasyMP Software
Po i n t
If an abnormality remains after checking the results of the above inspections, disconnect 
the Power Plug from the socket and contact your dealer or nearest address provided at 
page 121.
Is the Operation Indicator illuminated in orange?
The projector has been designed so that the...

108 - Cleaning the Projector, Cleaning the Lens, Cleaning the Air FilterEMP-715/505E  mainte.fm
Maintenance
This section provides explanations on taking care of the projector, replacing consumable items and other maintenance procedures.




 
Cleaning the Projector, Cleaning the Lens, 
Cleaning the Air Filter
Clean the projector if it becomes soiled or if the quality of the projected images deteriorate. 
Please clean the air filter about every 100 hours of operation.
Switch off the power supply and...