Epson Projector Emp 1810 User Manual

41
List of FunctionsImage Menu
Items that can be set vary depending on the image signal currently being projected as shown in the following screen shots. Setting details are saved for each 
image signal.
Sub Menu
Function
Color Mode
You can select the quality of the image to suit your surroundings. sp.22
Brightness
You can adjust the image brightness. 
Contrast
g
You can adjust the difference between light and shade in the images. 
Color Saturation
You can adjust the colour saturation for the images....

List of Functions
42
Signal Menu
Items that can be set vary depending on the image signal currently being projected as shown in the following screen shots. Setting details are saved for each 
image signal.
Sub Menu
Function
Auto Setup
You can select whether, when the input signal changes, the image is automatically adjusted to the optimum state (On) or not (Off). sp.67
Tracking
g
You can adjust computer images when vertical stripes appear in the images. sp.67
Sync.
g
You can adjust computer images when...

List of Functions
43
Settings Menu
Sub Menu
Function
Keystone
You can correct keystone distortion in images. 
H/V Keystone : Corrects horizontal and vertical keystone distortion. Select one of V-Keystone, H-Keystone and Auto V-Keystone. If Auto 
V-Keystone is selected and set to On, vertical tilt of the projector is detected and automatically corrected. When set to Off, correct manually 
by the [w], [v], [] buttons on the control panel.
V-Keystone and H-Keystone are for performing correction manually....

List of Functions
44
Extended Menu
Sub Menu
Function
Display
You can make settings related to the projectors display. 
Messages: You can set whether to display (On) or not display (Off) the source name when you change the input source, the colour mode name when 
you change the colour mode, a message when no image signal is input, and so on. 
Display Background
*: You can set the screen status for when no image signal is available to Black, Blue, or Logo. 
Startup Screen
*: You can set if the startup...

List of Functions
45
Operation
Direct Power On: You can set whether Direct Power On is enabled (On) or disabled (Off). 
When it is set to On and the projector power cable is connected to an electrical outlet, be aware that sudden surges of electricity when power 
comes back on after a power outage may cause the projector to turn on automatically. 
Sleep Mode: You can set whether projection stops automatically (On) or not (Off) when no operations are carried out for about 30 minutes while no 
image signal...

List of Functions
46
Network Menu (EMP-1815 Only)
When Network Protect is set to On in Password Protect, a message is displayed and the settings cannot be changed. You can make changes after 
setting Network Protect to Off. sp.35
Sub Menu
Function
To  N e t w o r k  
Configuration
The display changes to the Network menu so that you can make network settings. 
The following menus are available for network settings: Basic, Wireless LAN menu, Security Menu, Wired LAN Menu, Mail notification 
menu, SNMP...

List of Functions
47
fOperations in the Network Menu
Selection from the top menu, selection of submenus, and changing of 
selected items are the same as operations in the configuration menu. 
However, to exit, the following operation is needed. Go to Complete 
menu, and select one of Yes, No or Cancel.The screen returns to the configuration menu. 
fSoft keyboard operations
The network menu contains items that require input of alphanumerics 
during setup. In this case, the following software keyboard is...

List of Functions
48
fBasic Menu
Sub Menu
Function
Projector name
You can enter a name for the projector. When connected to a network, this name is used to identify the projector. The initial value is EMPxxxxxx 
(where xxxxxx are the last six digits of the MAC Address). You can enter up to 16 single-byte alphanumeric characters.
PJLink Password
Enter a password to use when you access the projector using compatible PJLink software. sp.91
You can enter up to 32 single-byte alphanumeric characters.
Web...

List of Functions
49
fWireless LAN Menu
Sub Menu
Function
Connection mode
Sets the connection mode. 
Set Quick to establish a quick wireless connection in a 1:1 configuration. Set Advanced to connect to the network system via an access point. 
Antenna level
Displays the wireless LAN wave strength. 
Wireless LAN 
system
Sets the wireless LAN system. 
ESSID
g
Enter an ESSID. When an ESSID is provided for the wireless LAN system in which the projector participates, enter the ESSID. The initial value is...

List of Functions
50
fSecurity Menu
Type of securityWhen connecting and communicating in wireless LAN mode, you can select one of the following encryption and authentication methods.
WEP
Data is encrypted with a code key (WEP key)
This mechanism prevents communication unless the encrypted keys for the access point and the projector match.
WPA
This is an encryption standard that improves security which is a weak point of WEP. Although there are several kinds of WPA encryption methods, this 
projector...