Epson Projector Emp 1810 User Manual

1
User’s Guide 

2
Notations Used in This Guide
Attention
Indicates procedures which may result in damage or injury if sufficient care is not taken. 
q
Indicates additional information and points which may be useful to know regarding a topic. 
s
Indicates a page where detailed information regarding a topic can be found. 
g
Indicates that an explanation of the underlined word or words in front of this symbol appears in the glossary of terms. See 
the Glossary section of the Appendices. sp.88Indicates operating methods and...

3
ContentsProjector Features ......................................................................................5
EMP-1815/1810 Common Features .................................................................... 5
EMP-1815 Features ............................................................................................. 6
Part Names and Functions ........................................................................7...

Contents
4
Connecting a LAN Cable..........................................................................86
Optional Accessories and Consumables ...............................................87
Glossary ....................................................................................................88
ESC/VP21 Commands ..............................................................................90
Command List...

5
Projector FeaturesEMP-1815/1810 Common Features
The following introduces features common to the EMP-1815 and the 
EMP-1810. 
fQuick Setup
This feature corrects distortion in the projected image by a simple one-
touch operation. Images can be corrected and matched to the size of the 
screen to simplify preparations. 
fThe A/V mute slide makes it 
easy to project and store
You can stop and resume projection 
easily by opening and closing the A/V 
mute slide which makes giving clear 
presentations...

Projector Features
6
EMP-1815 Features
The EMP-1815 can be connected to a computer by a wired or wireless 
LAN connection. The situations in which this projector can be used 
increase as shown below if you use the PC applications supplied.
fComputer and wireless connection
Use a wireless LAN to connect 
easily to your computer in a 1:1 
configuration.  sWireless LAN 
Quick Connection Guide
You can also connect to the access 
point. sEasyMP Operation Guide
fConnect using a USB cable 
(USB display)
Simply...

7
Part Names and FunctionsFront/Top
Name
Function
A
Control panel
sp.12
B
USB access 
indicator
(EMP-1815 Only)
Whether they are flashing or lit indicates the 
access status of USB Type A.
When the indicator is off, this indicates that no 
USB devices are inserted. 
When the light is orange, this indicates that a 
USB device is inserted. 
When the light is red, this indicates that an 
error has occurred. 
C
Lamp cover
Open this cover when replacing the projectors 
lamp. sp.75
F D C AK
I
B
JH
G
EL
D
Air...

Part Names and Functions
8
Side (EMP-1815 Only)
Name
Function
A
Wireless LAN unit
Install this before using the projector. Connects 
the projector to a computer by a wireless 
connection. sWireless LAN Quick 
Connection Guide
B
Card slot
This slot is for inserting a CompactFlash card 
when the PC Free function in EasyMP is used. 
You can also write to the CompactFlash card 
from a computer connected to the projector via 
a network. sp.83
C
Card slot access 
indicator
Indicates the access status of the...

Part Names and Functions
9
Base
Name
Function
A
Suspension 
bracket fixing 
points (3 points)
Attach the optional ceiling mount here when 
suspending the projector from a ceiling. 
sp.72, 87
B
Security cable 
installation point
Pass a commercially available anti-theft wire 
lock through here when you want to secure the 
projector to a fixed object. sp.38
C
Rear foot
Turn to extend and retract to adjust the 
horizontal tilt. sQuick Start Guide
D
Screw hole to fix 
wireless LAN unit
This hole is for a...

Part Names and Functions
10
Rear
Name
Function
A
Monitor Out port
Outputs the image signal from the computer 
connected to the Computer1 input port to an 
external monitor. This is not available for 
component video 
g signals or other signals 
being input to any port other than the 
Computer1 input port.
Audio Out port
Outputs the sound of the image currently being 
projected to external speakers.
sp.85
B
Power inlet
Connects to the power cable. sQuick Start 
Guide
C
S-Video input 
port
For S-video
g...