Epson Projector Emp 1810 User Manual

Part Names and Functions
11
Computer2 input 
port
For video signals from a computer and 
component video
g signals from other video 
sources.
Audio2 input port
Connect to the audio out port of the computer 
connected to the Computer2 input port. 
sQuick Start Guide
Name
Function 

Part Names and Functions
12
Control Panel
Name
Function
A
[Power] button
Turns the projector power on or off. sQuick 
Start Guide
B
[Quick Setup] 
button
Press this button to correct distortion in the 
projected image so that it perfectly matches 
the size of the screen. sp.17
C
[Source Search] 
button
Changes to the next input source that is 
connected to the projector and is sending an 
image. sp.20
H
B
I AJC
DF G
E
D
[Enter] button
If pressed during projection of computer signal 
images, it...

Part Names and Functions
13
Remote Control
Name
Function
A
[E-Zoom]button 
(z ) ( x)
(z ) Enlarges the image without changing the 
projection size.
( x ) Reduces parts of images that have been 
enlarged using the [ z] button.
s p.27
B
V
Y
AK
M
L N QX
D
R ST U
P
OW
HJFG E CI
B
[Page] button
(
[ ) ( ])
When the wireless mouse function or Network 
presentation* is performed, you can change 
the PowerPoint file page by pressing the page 
up/page down buttons.  sp.28 , EasyMP 
Operation Guide
* EMP-1815...

Part Names and Functions
14
M
[Volume] button
(a) (b) 
(a) Decreases the volume.
(b) Increases the volume.
sQuick Start Guide
N
[Auto] button
If pressed during projection of computer signal 
images, it automatically adjusts the tracking, 
synchronization, and position to project the 
optimum image. sp.41
O
[Help] button
Displays and closes the help screen which 
shows you how to deal with problems if they 
occur. sp.60
P
[ID] button
Press this button to check if the projector can 
be operated by the...

Useful FunctionsThis chapter explains useful functions for giving presentations and so on, and the security functions. Correcting Distortion in the Projected Image .. 16
• Automatically Correcting Distortion (Quick Setup)......17
Fitting projected image properly inside the screen ........................ 17
 Aligning the Projected Image to the Screen 
(Quick Corner) ..................................................................18
Changing the Projected Image .......................... 20
...

16
Correcting Distortion in the Projected ImageThere are four ways to correct distortion in projected images as below.Automatic correction• Quick Setup
Press the [Quick Setup] button to fit on the screen at an aspect ratio 
of 4:3. 
 Auto V-Keystone
Tilt the projector vertically to automatically correct distortion in the 
vertical direction.Manual correction Quick Corner
This allows you to manually correct each of the four corners of the 
projected image separately.
 H/V-Keystone
This allows you to...

Correcting Distortion in the Projected Image
17
Automatically Correcting  Distortion (Quick Setup)
Quick Setup automatically corrects dist ortion in the projected image, that 
occurs when the projector is instal led at a tilt to the image projection 
surface, so that the image is projected at  an aspect ratio of 4:3. In the case 
of a screen having an aspect ratio of  4:3, the projected image is corrected 
so that it fits perfectly in the screen.
Refer to  Quick Start Guide  for how to do the operation....

Correcting Distortion in the Projected Image
18
Aligning the Projected Image to the Screen (Quick Corner)
This function independently corrects each of the four corners of the 
projected image to align the image with the screen. 
To operate this function on the projectors control panel, set Setting 
menu - Keystone in the configuration menu to QuickCorner. 
A
Press one of [w], [v], [] on the projector. The Quick Corner screen for selecting the four corners is 
displayed.
B
Select the corner to be...

Correcting Distortion in the Projected Image
19
C
Correct the position of the corner by the [w], [v], 
[] buttons on the projector or the [h] 
button on the remote control.If the screen below is displayed during the correction, this indicates 
that the correction amount limit has been reached.
D
To exit the correction, press the [Esc] button on the 
projector or remote control. 

20
Changing the Projected ImageYou can change the projected image in the following two ways.
 Changing by Source Search
The projector automatically detects signals being input from 
connected equipment, and the image being input from the equipment 
is projected.
 Changing directly
You can use the remote control buttons to change to the target input 
port.Automatically Detect Incoming Signals and Change the Projected Image (Source Search)
You can project the target image quickly as input ports with no...