Epson Projector Emp 1810 User Manual

Remote Control of Two or More Projectors
31
C
Press the [Menu] button to close the configuration 
menu.When this setting is completed, only operations from a remote 
control having a matching ID or whose ID is set to 0 are 
accepted.
Setting the Remote Control ID
You need to set the remote control ID every time you turn on the 
projector.
Point the remote control at the remote receiver on the projector you want 
to operate. A
Press the [ID] button.
B
Press the numeric button of the same number as the 
ID...

32
Adjusting Colour for Several Projectors (Multi-Screen Colour Adjustment)When several projectors are lined up and projecting images, you can 
adjust the brightness and colour tone of each projectors image with 
multi-screen colour adjustment so that the colours of images from 
each projector match closely.
In some cases the brightness and colour tone may not match 
completely even after adjustment.Summary of Adjustment Procedure
Make adjustments according to the following procedure.
1. Setting the...

Adjusting Colour for Several Projectors (Multi-Screen Colour Adjustment)
33
Image Correction Method
After setting up the projectors, adjust the brightness and tone for each 
image.A
Press the [Menu] button and select Extended - 
Multi-screen from the configuration menu. 
sUsing the Configuration Menu p.40
B
Select the level to be adjusted in Adjustment 
Level. Each time a level is selected, the pattern of the level selected is 
displayed.
 You can start adjusting from any level, usually you can make it...

34
Security FunctionsThe projector has the following enhanced security functions.
 Password protect
You can limit who can use the projector.
 Operation Lock
You can prevent people changing the settings on the projector 
without permission.
 Anti-Theft Lock
The projector is equipped with various types of anti-theft security 
devices.Managing Users (Password Protect)
When Password Protect is activated, people who do not know the 
password cannot use the projector to project images even if the projector...

Security Functions
35
fSetting Password Protect
Use the following procedure to set Password Protect. A
Hold down the [Freeze] button for about five 
seconds. The password protect setting menu is displayed. 
B
Turn on Power On Protect. (1) Select Power On Protect, and then press the [Enter] button. 
(2) Select On, and then press the [Enter] button. 
(3) Press the [Esc] button. 
C
Turn on Users Logo Protect.  (1) Select Users Logo Protect, and then press the [Enter] button.
(2) Select On, and then press...

Security Functions
36
E
Set the password. (1) Select Password, and then press the [Enter] button.
(2) The message Change the password? is displayed, select 
Yes and then press the [Enter] button. The default setting for 
the password is 0000. Change this to your own desired 
password. If you select No, the screen shown in step 1 is 
displayed again.
(3) While holding down the [Num] button, enter a four digit 
number using the numeric buttons. The number entered is 
displayed as * * * *. When you enter...

Security Functions
37
Restricting Operation (Operation Lock)
Do one of the following to lock the operation buttons on the control panel.
Full lock
All of the buttons on the control panel are locked. You cannot perform 
any operations from the control panel, including turning the power on or 
off.
 Partial lock
All of the buttons on the control panel, except for the [Power] button, 
are locked.
This is useful at events or shows when you want to deactivate all buttons 
and only project, or at schools...

Security Functions
38
Anti-Theft Lock
As the projector is often setup on ceiling mounts and left in rooms 
unattended, it is possible that someone may try and take the projector, so 
the projector includes the following security devices.
Security slot
The security slot is compatible with the Microsaver Security System 
manufactured by Kensington. You can find details about the Microsaver 
Security System on the Kensington homepage http://www.kensington.com/
.
Security cable installation point
A...

Configuration MenuThis chapter explains how to use the configuration menu and its functions.Using the Configuration Menu .......................... 40
List of Functions ................................................. 41
 Image Menu .......................................................................41
 Signal Menu .......................................................................42
 Settings Menu ....................................................................43
 Extended Menu...

40
Using the Configuration Menu
A
Selecting from the 
top menu
C
Changing the 
selected item
B
Selecting from the 
sub menu
Top menu
Sub menu (Settings) Guide
Select the setting to change
Using the remote controlUsing the control panel
Buttons used
D
Exit