Epson Projector BrightLink Pro 1430Wi User Manual

Note:
If you have the optional remote control cable set (ELPKC28), you can use it instead of batteries to
power the control pad.
1. Remove the top cover of the control pad by prying it off as shown.
2. Insert the batteries with the +and –ends facing as shown.
81   

3. Replace the cover and press it down until it clicks into place.
Parent topic:
Setting Up the Projector
82  

Using the Projector on a Network
Follow the instructions in these sections to set up your projector for use on a network.
Wired Network Projection
Wireless Network Projection
Setting Up Projector Network E-Mail Alerts
Setting Up Monitoring Using SNMP
Controlling a Networked Projector Using a Web Browser
Creating an Address Book
Adding Templates from a Web Browser
Crestron RoomView Support
Wired Network Projection You can send images to your projector through a wired network. To do this, you connect the...

Note:
If your projector is connected via a LAN cable to a network that includes a wireless access point,
you can connect to the projector wirelessly through the access point using the EasyMP Network
Projection software.
Connecting to a Wired Network
Selecting Wired Network Settings
Parent topic: Using the Projector on a Network
Connecting to a Wired Network To connect the projector to a wired local area network (LAN), use a 100Base-TX or 10Base-T network
cable. To ensure proper data transmission, use a...

3. Select the
Networkmenu and press Enter.
4. Select Network Configuration and pressEnter.
5. Select the Basicmenu and press Enter.
85 

6. Select the following basic options as necessary:
•Projector Name lets you enter a name up to 16 alphanumeric characters long to identify the
projector over the network.
• PJLink Password lets you enter a password up to 32 alphanumeric characters long for using the
PJLink protocol for projector control.
• Web Control Password orWeb Remote Password lets you enter a password up to 8
alphanumeric characters long for accessing the projector over the web. (Default user name is
EPSONWEB; default password is...

• If you must set addresses manually, turn off
DHCPand enter the projectors IP Address,Subnet
Mask, DNS server, WINS server,and Gateway Address as needed. When manually entering IP
Settings, you cannot use restricted IP addresses.
Note: To highlight the numbers you want from the displayed keyboard, press the arrow buttons on
the remote control. To select a highlighted number, press Enter. Or, press and hold theNumbutton
on the remote control while entering the desired numbers.
10. To prevent display of...

Setting
Restricted IP addresses
WINS Server 0.0.0.0
192.0.2.x
224.0.0.0 to 255.255.255.255
If you are not setting a WINS server, use 0.0.0.0.
Parent topic: Selecting Wired Network Settings
Wireless Network Projection You can send images to your projector through a wireless network. To do this, you must install the
Epson 802.11b/g/n wireless LAN module, and then set up your projector and computer for wireless
projection.
Note:If your projector is connected via a LAN cable to a network that includes a...

Using Quick Wireless Connection (Windows Only)
Selecting Wireless Network Settings Manually
Selecting Wireless Network Settings in Windows
Selecting Wireless Network Settings in OS X
Enabling WPA or EAP Security
Parent topic:
Using the Projector on a Network
Installing the Wireless LAN Module To use the projector over a wireless network, install the Epson 802.11b/g/n wireless module in the
projector. Do not install any other type of wireless module.
Caution:Never remove the module while its indicator...

2. Unscrew and remove the cable cover if it is attached (screwdriver not included).
3. Insert the wireless LAN module into the port shown here.
90