Epson Projector BrightLink Pro 1430Wi User Manual

Note:
Monitors that use a refresh rate less than 60 Hz may not be able to display images correctly.
1. Make sure your computer is connected to the projectors Computerport.
2. Connect the external monitors cable to your projectors Monitor Outport.
Note: Only analog RGB signals from the Computer port can be output to an external monitor.
Note: Content you draw using the interactive features is not displayed on an external monitor unless
you draw it using Easy Interactive Tools.
Parent topic: Projector...

2. Locate the appropriate cable to connect your external speakers, such as a stereo mini-jack-to-pin-
jack cable, or another type of cable or adapter.
3. Connect one end of the cable to your external speakers as necessary.
4. Connect the stereo mini-jack end of the cable to your projectors Audio Outport.
Parent topic: Projector Connections
Connecting to External USB Devices Follow the instructions in these sections to connect external USB devices to the projector.
USB Device Projection
Connecting a USB...

Note:
Digital cameras or smartphones must be USB-mounted devices, not TWAIN-compliant devices,
and must be USB Mass Storage Class-compliant.
Note: USB hard drives must meet these requirements:
• USB Mass Storage Class-compliant (not all USB Mass Storage Class devices are supported)
• Formatted in FAT or FAT32
• Self-powered by their own AC power supplies (bus-powered hard drives are not recommended)
• Avoid using hard drives with multiple partitions
You can project slide shows from image files on a...

Connecting a USB Device to the Control Pad or Projector
You can connect your USB device to the USB-Aport on the control pad or projector and use it to project
images and other content.
1. If your USB device came with a power adapter, plug the device into an electrical outlet.
2. Make sure a USB cable is connected between the USB-Aport on the projector and the USB-Bport
on the control pad.
3. Connect the USB cable for the device (or USB flash drive or USB memory card reader) into the USB-A port on the...

1. If the device has a power button, turn off and unplug the device.
2. Disconnect the USB device (or cable) from the control pad or projector.
Parent topic:
Connecting to External USB Devices
Connecting a Printer to the Control Pad You can connect an Epson printer or all-in-one device to the Printerport on the control pad and use it to
print your projected and annotated content from the whiteboard.
Note: Make sure the printer meets the control command requirements.
1. Make sure a USB cable is connected...

Supported Printer Types
You can connect to a printer with the type and command language described here.
Note:Scanning is only supported from Epson All-in-One printers over a USB connection.
Printer type Command language Scanner USB Network
connection connection
Single- ESC/Raster NoYes No
function
printer
Single- ESC/P-R NoYes Yes
function
printer
Multi-function ESC/Raster YesYes No
printer
Multi-function ESC/P-R YesYes Yes
printer
Laser ESC/Page, ESC/Page- No NoYes
Color
Laser PCL6-compatible NoNoYes...

• For the Epson DC-12 document camera, connect it to the projectors
HDMI,Computer, or Videoport
and to the corresponding port on the document camera. See the document camera manual for details.
• For the Epson DC-20 document camera, connect it to the projectors HDMI,Computer, or Videoport
and to the corresponding port on the document camera. See the document camera manual for details.
Note: For additional features supported by software, connect your document camera to your computer
instead of the...

Note:
If you are connecting three or more projectors, connect the projectors in a chain as shown.
2. In the Extended menu, set the Sync of Projectorssetting toWired.
Note: If you are using the projector in the same room as another projector that does not support
cable connection, set the Wired Sync Modesetting toMode 2in the projectors Extended menu. If
you do not have the optional remote control cable, set the Distance of Projectorssetting in the
projectors Extended menu to Mode 2.
Parent topic:...

2. Insert the batteries with the
+and –ends facing as shown.
3. Close the battery cover and press it down until it clicks into place. Warning: Dispose of used batteries according to local regulations. Do not expose batteries to heat
or flame. Keep batteries out of the reach of children; they are choking hazards and are very
dangerous if swallowed.
Parent topic: Setting Up the Projector
Installing Batteries in the Pens Each pen uses one AA battery.
79   

1. Open the battery cover as shown.
2. Insert the battery with the
+and –ends facing as shown.
3. Replace the battery cover and press it down until it clicks into place.
Parent topic: Setting Up the Projector
Installing Batteries in the Control Pad The control pad uses two AA batteries.
80