Epson Projector BrightLink 475Wi User Manual

							

3.
Select theinput source thatyouwant tocontrol inthe Sources Listbox. Youcanscroll through
 available
sourcesusingtheupand down arrows inthe box.
 4.
Tocontrol projection remotely,clicktheon-screen buttonsthatcorrespond tothe projectors remote
 control
buttons. Youcanscroll through buttonoptions atthe bottom ofthe screen.
 Note:
These on-screen buttonsdonot directly correspond tothe projectors remotecontrolbuttons:
 •
OK acts asthe Enter button
 •
Menu displays theConfiguration menu
 5.
Toview information abouttheprojector, clicktheInfo tab.
 6.
Tochange projector, Crestron,andpassword settings,clicktheTools tab,select settings onthe
 displayed
screen,andclick Send .
 7.
When youfinish selecting settings,clickExittoexit theprogram.
 Parent
topic:Crestron RoomView Support
 71  
						

							

Using
BasicProjector Features
 Follow
theinstructions inthese sections touse your projectors basicfeatures.
 Turning
Onthe Projector
 Turning
Offthe Projector
 Selecting
theLanguage forthe Projector Menus
 Adjusting
theImage Height
 Image
Shape
 Resizing
theImage withtheWide andTele Buttons
 Adjusting
theImage Position
 Focusing
theImage
 Remote
ControlOperation
 Selecting
anImage Source
 Projection
Modes
 Image
Aspect Ratio
 Color
Mode
 Controlling
theVolume withtheVolume Buttons
 Projecting
aSlide Show
 Turning
Onthe Projector
 Turn
onthe computer orvideo equipment youwant touse before youturn onthe projector soitcan
 display
theimage source.
 72 
						

							

1.
Connect thepower cordtothe projectors powerinlet.
 2.
Plug thepower cordintoanelectrical outlet.
 The
projectors powerlightturns orange. Thisindicates thattheprojector isreceiving power,butis
 not
yetturned on(itisin standby mode).
 Note:
WithDirect Power Onturned on,theprojector turnsonassoon asyou plug itin.
 3.
Press thepower button onthe projector orthe remote controltoturn onthe projector.
 The
projector beepsandthepower lightflashes greenasthe projector warmsup.After about 30
 seconds,
thepower lightstops flashing andturns green.
 Warning:
Neverlookintotheprojector lenswhen thelamp ison. This candamage youreyes andis
 especially
dangerous forchildren andpets.
 73  
						

							

If
you donot see aprojected imagerightaway, trythe following:
 •
Turn onthe connected computerorvideo device.
 •
Insert aDVD orother video media, andpress theplay button (ifnecessary).
 •
Press theSource Searchbuttononthe projector orremote controltodetect thevideo source.
 Parent
topic:UsingBasicProjector Features
 Turning
Offthe Projector
 Before
turning offthe projector, shutdown anycomputer connected toitso you canseethecomputer
 display
duringshutdown.
 Note:
Turnoffthis product whennotinuse toprolong thelifeofthe projector. Lamplifewill vary
 depending
uponmode selected, environmental conditions,andusage. Brightness decreasesovertime.
 1.
Press thepower button onthe projector orthe remote control.
 The
projector displaysashutdown confirmation screen.
 2.
Press thepower button again.(Toleave iton, press anyother button.)
 The
projector beepstwice,thelamp turns off,and thepower lightturns orange.
 Note:
WithEpsons InstantOfftechnology, thereisno cool-down periodsoyou canpack upthe
 projector
fortransport rightaway (ifnecessary).
 Caution:
Donot turn theprojector onimmediately afterturning itoff. Turning theprojector onand off
 frequently
mayshorten thelifeofthe lamp.
 74 
						

							

3.
Totransport orstore theprojector, makesurethepower lightisorange (butnotflashing), then
 unplug
thepower cord.
 Caution:
Toavoid damaging theprojector orlamp, never unplug thepower cordwhen thepower
 light
isgreen orflashing orange.
 Parent
topic:UsingBasicProjector Features
 Related
references
 Projector
SetupSettings -Extended Menu
 Selecting
theLanguage forthe Projector Menus
 If
you want toview theprojectors menusandmessages inanother language, youcanchange the
 Language
setting.
 1.
Turn onthe projector.
 2.
Press theMenu button.
 3.
Select theExtended menuandpress Enter.
 4.
Select theLanguage settingandpress Enter.
 5.
Select thelanguage youwant touse and press Enter.
 6.
Press Menu orEsc toexit themenus.
 Parent
topic:UsingBasicProjector Features
 75 
						

							

Adjusting
theImage Height
 If
you areprojecting fromatable orother flatsurface, andtheimage istoo high orlow, youcanadjust
 the
image heightusingtheprojectors adjustablefeet.Make surethefeet have been installed.
 Caution:
Tiltingtheprojector willdistort theimage shape andmay cause difficulty focusing theimage.
 For
interactive use,make suretheprojector isnot tilted ananangle ofmore than±3º vertically or
 horizontally.

1.
Turn onthe projector anddisplay animage.
 2.
Toraise theimage, extend therear feetbyrotating them.
 3.
Tolower theimage, extend thefront footbyrotating it.
 76   
						

							

4.
Ifthe image istilted, rotate therear feettoadjust theirheight.
 If
the projected imageisunevenly rectangular, youneed toadjust theimage shape.
 Parent
topic:UsingBasicProjector Features
 Related
concepts
 Image
Shape
 Related
references
 Projector
FeatureSettings -Settings Menu
 Image
Shape
 You
canproject anevenly rectangular imagebyplacing theprojector directlyinfront ofthe center ofthe
 screen
andkeeping itlevel. Ifyou place theprojector atan angle tothe screen, ortilted upordown, oroff
 to
the side, youmay need tocorrect theimage shape forthe best display quality.
 Note:
Forinteractive use,theimage mustbeevenly rectangular, withoutdistortion.
 Correcting
ImageShape withtheKeystone Buttons
 Correcting
ImageShape withQuick Corner
 Parent
topic:UsingBasicProjector Features
 77  
						

							

Correcting
ImageShape withtheKeystone Buttons
 You
canusetheprojectors keystonecorrection buttonstocorrect theshape ofan image thatis
 unevenly
rectangular onthe sides.
 Note:
Forinteractive use,make surethedegree ofhorizontal andvertical keystone correction isno more
 than
±6º.
 1.
Turn onthe projector anddisplay animage.
 Note:
Youcandisplay apattern toaid inadjusting theprojected imageusingtheSettings menu.
 2.
Press oneofthese keystone buttonsonthe control paneltodisplay theKeystone adjustment
 screen.

78  
						

							

3.
Press akeystone buttononthe projectors controlpaneltoadjust theimage shape.
 Note:
Thehorizontal keystoneadjustment buttonsarelabeled WideandTele .
 After
correction, yourimage isslightly smaller.
 Note:
Ifthe projector isinstalled outofreach, youcanalso correct theimage shape usingthe
 Keystone
settingsinthe projector menus.
 Parent
topic:Image Shape
 79   
						

							

Related
references
 Projector
FeatureSettings -Settings Menu
 Correcting
ImageShape withQuick Corner
 You
canusetheprojectors QuickCorner settingtocorrect theshape andsize ofan image thatis
 unevenly
rectangular onallsides.
 1.
Turn onthe projector anddisplay animage.
 Note:
Youcandisplay apattern toaid inadjusting theprojected imageusingtheSettings menu.
 2.
Press theMenu button.
 3.
Select theSettings menuandpress Enter.
 4.
Select theKeystone settingandpress Enter.
 5.
Select theQuick Corner settingandpress Enter.Then press Enter again.
 You
seetheQuick Corner adjustment screen.
 80