Epson P 600 Manual

							

4.
Select Wi-FiSetup Wizard .
 Note:
Ifyou need todisable thewireless networktoset upyour product onanEthernet network,
 press
thedown arrow button, selectDisable Wi-Fi,and press theOK button. Thenfollow the
 instructions
onchanging toawired network connection.
 5.
Select thename ofyour wireless networkorenter thename manually.
 Note:
Toenter thewireless networknamemanually, selectOther Networks andselect the
 Network
(SSID)field.Usethedisplayed keypadtoenter yournetwork name.
 6.
Select thePassword fieldandenter yourwireless password usingthedisplayed keypad.
 Note:
Thenetwork nameandpassword arecase sensitive. Besure tocorrectly enteruppercase and
 lowercase
letters,andnumeric orspecial characters.
 •
Press ortomove thecursor.
 •
Press tochange thecase ofletters.
 •
Press todelete theprevious character.
 •
Press toenter numbers andsymbols.
 •
Press toenter aspace.
 31 
						

							

7.
Press whenyoufinish entering yourpassword andselect Proceed .
 8.
Confirm thedisplayed networksettingsandselect OKtosave them.
 Note:
Ifyou need tochange asetting, pressthebackbutton.
 9.
Ifyou want toprint anetwork setupreport, selectPrint.(Otherwise, selectDone.)
 10.
Press the homebutton toexit.
 Your
product shouldnowbeconnected tothe network.
 Note:
Ifthe WiFi connection symboldoesnotappear liton the touch screen, youmay have selected
 the
wrong network nameorentered thepassword incorrectly. Repeatthesestepstotry again.
 Parent
topic:Wi-FiInfrastructure ModeSetup
 Wi-Fi
Direct ModeSetup
 You
cansetupyour product tocommunicate directlywithyour computer oranother devicewithout
 requiring
awireless routeroraccess point.
 1
 Epson
product
 2
 Computer
withawireless interface
 3
 Other
wireless device
 32    
						

							

You
canselect oneofthese modes tocommunicate withyour computer ordevice:
 Access
pointmode
 The
product itselfactsasthe network accesspointforupto4devices. Whenoperating inthis mode,
 your
product displays anAP connection symbolonthe LCD screen.
 Peer-to-peer
mode
 The
product communicates one-to-onewithanother Wi-FiDirect capable device.Whenoperating in
 this
mode, yourproduct displays aDirect orDconnection symbolonthe LCD screen.
 To
disconnect apeer-to-peer modeconnection, releasetheconnection toyour product fromyour
 computer
orother device.
 To
enable peer-to-peer mode,youmust select itfrom theWeb Config Utility,underWiFi/Network
 Settings
>Services >Wi-Fi Direct .
 Enabling
Wi-FiDirect Mode
 Parent
topic:Wi-FiorWired Networking
 Enabling
Wi-FiDirect Mode
 You
canenable Wi-FiDirect modetoallow direct communication betweenyourproduct andacomputer
 or
other devices withoutawireless routeroraccess point.
 Note:
Youmay need toenable theWi-Fi Direct setting inthe Advanced Setupmenubefore youcan
 enable
Wi-FiDirect mode.
 1.
Press the homebutton, ifnecessary.
 2.
Press the network statusicon.
 3.
Select Wi-FiSetup .
 33   
						

							

You
seeascreen likethis:
 4.
Scroll downandselect Wi-FiDirect Setup.
 5.
Select Connection Setup.
 6.
Select Change Password andselect Yes.
 Note:
Ifyou have already connected devicesorcomputers toyour product viaWi-Fi Direct, theyare
 disconnected
whenyouchange thepassword.
 7.
Enter yournewWi-Fi Direct password.
 34 
						

							

Note:
Yourpassword mustbeatleast 8and nomore than22characters long.
 •
Press ortomove thecursor.
 •
Press tochange thecase ofletters.
 •
Press todelete theprevious character.
 •
Press toenter numbers andsymbols.
 •
Press toenter aspace.
 8.
Press whenyoufinish entering yourpassword.
 You
seeascreen likethis:
 9.
Scroll downtoview theSSID (Wi-Fi network name)andpassword.
 10.
Use your computer orwireless devicetoselect theWi-Fi network name(SSID) displayed onthe
 LCD
screen, thenenter thepassword shown.
 11.
Press the homebutton toexit.
 You
seeeither anAP orDirect connection symbolonthe LCD screen andshould beable toprint
 directly
toyour product fromyourcomputer ordevice.
 Note:
Ifthe APorDirect connection symbolisnot displayed onthe LCD screen, Wi-FiDirect mode
 is
not enabled. Repeatthesestepstotry again.
 35  
						

							

Parent
topic:Wi-FiDirect ModeSetup
 Wi-Fi
Protected Setup(WPS)
 If
your network usesaWPS-enabled wirelessrouteroraccess point,youcanquickly connect your
 product
tothe network usingWi-FiProtected Setup(WPS).
 Note:
Tocheck ifyour router isWPS-enabled, lookforabutton labeled WPSonyour router oraccess
 point.
Ifthere isno hardware button,theremaybeavirtual WPSbutton inthe software forthe device.
 Check
yournetwork productdocumentation fordetails.
 Using
WPStoConnect toaNetwork
 Parent
topic:Wi-FiorWired Networking
 Using
WPStoConnect toaNetwork
 If
you have aWPS-enabled wirelessrouteroraccess point,youcanuseWi-Fi Protected Setup(WPS) to
 connect
yourproduct tothe network.
 1.
Press the homebutton, ifnecessary.
 2.
Press the network statusicon.
 3.
Select Wi-FiSetup .
 You
seeascreen likethis:
 4.
Select PushButton Setup(WPS) andselect Proceed .
 36   
						

							

5.
Follow theinstructions onthe LCD screen tocomplete WPSsetup.
 6.
Press the homebutton toexit.
 Your
product shouldnowbeconnected tothe network.
 Parent
topic:Wi-FiProtected Setup(WPS)
 Printing
aNetwork StatusSheet
 You
canprint anetwork statussheettohelp youdetermine thecauses ofany problems youmay have
 using
yourproduct onanetwork.
 1.
Press the homebutton, ifnecessary.
 2.
Press thesetupbutton.
 3.
Select Network Status.
 4.
Select Wi-Fi/Network Status.
 You
seeascreen likethis:
 Note:
Ifyou areconnected toawireless network, thesignal strength isalso displayed.
 5.
Select Print.
 6.
Select Printagain toprint thenetwork statussheet.
 Examine
thesettings shownonthe network statussheettodiagnose anyproblems youhave.
 Parent
topic:Wi-FiorWired Networking
 37    
						

							

Changing
orUpdating NetworkConnections
 See
these sections tochange orupdate howyour product connects toanetwork.
 Accessing
theWeb Config Utility
 Changing
aUSB Connection toaWi-Fi Connection
 Changing
aWi-Fi Connection toaWired Network Connection
 Connecting
toaNew Wi-Fi Router
 Disabling
Wi-FiFeatures
 Parent
topic:Wi-FiorWired Networking
 Accessing
theWeb Config Utility
 You
canselect yourproducts networksettingsandconfirm itsoperating statususingaweb browser.
 You
dothis byaccessing yourproducts built-inWebConfig utilityfromacomputer orother device thatis
 connected
tothe same network asyour product.
 1.
Print anetwork statussheet.
 2.
Locate theIPAddress foryour product thatislisted onthe network statussheet.
 3.
Onacomputer orother device connected tothe same network asyour product, openaweb
 browser.

4.
Enter yourproducts IPaddress intotheaddress bar.
 You
seetheavailable WebConfig utilityoptions.
 Parent
topic:Changing orUpdating NetworkConnections
 Related
tasks
 Printing
aNetwork StatusSheet
 Changing
aUSB Connection toaWi-Fi Connection
 If
you have already connected yourproduct toyour computer usingaUSB connection, youcanchange
 to
aWi-Fi connection.
 1.
Disconnect theUSB cable fromyourproduct.
 2.
Uninstall yourproduct software.
 3.
Download andinstall yourproduct software fromtheEpson website usingtheinstructions onthe
 Start
Here sheet.
 Parent
topic:Changing orUpdating NetworkConnections
 38 
						

							

Changing
aWi-Fi Connection toaWired Network Connection
 If
you have already connected yourproduct toyour computer wirelessly, youcanchange toawired
 network
connection ifnecessary.
 1.
Disable yourproducts Wi-Fifeatures.
 2.
Connect oneendofan Ethernet networkcabletothe products LANport.
 3.
Connect theother endtoany available LANportonyour router oraccess point.
 4.
Uninstall yourproduct software.
 5.
Download andinstall yourproduct software fromtheEpson website.
 6.
Follow theon-screen instructions toinstall thesoftware.
 7.
When youseetheSelect YourConnection screen,selectWired network connection .
 8.
Ifyou seeaSelect SetupOption screen, selectSetupprinter forthe first time.
 9.
Continue followingtherest ofthe on-screen instructions.
 Parent
topic:Changing orUpdating NetworkConnections
 Related
tasks
 Disabling
Wi-FiFeatures
 Connecting
toaNew Wi-Fi Router
 If
you change thewireless routeryouhave been using onyour network, youneed toupdate your
 products
Wi-Ficonnection tothe new router.
 Note:
Ifyou switch toa5GHz wireless router,setthe router tooperate indual band (2.4GHz and5
 GHz)
mode. Seeyour router documentation forinstructions.
 1.
Doone ofthe following:
 •
Windows :Uninstall yourproduct software.
 •
OS X:Go tothe next step.
 2.
Download andinstall yourproduct software fromtheEpson website usingtheinstructions onthe
 Start
Here sheet.
 Parent
topic:Changing orUpdating NetworkConnections
 Related
tasks
 Uninstalling
PrintingSoftware -Windows
 39 
						

							

Disabling
Wi-FiFeatures
 You
may need todisable yourproducts Wi-Fifeatures ifyou change yournetwork connection typeor
 need
tosolve aproblem withyour network connection.
 Note:
Before disabling Wi-Fifeatures, makeanote ofyour products SSID(network name)and
 password,
andanynetwork settingsselected forthe Epson Connect servicesyoumay use.
 1.
Press the homebutton, ifnecessary.
 2.
Press the network statusicon.
 3.
Select Wi-FiSetup .
 You
seethisscreen:
 4.
Scroll downandselect Disable Wi-Fi.
 5.
Select Yestodisable Wi-Fi.
 Parent
topic:Changing orUpdating NetworkConnections
 40