Epson Aculaser CX16NF User Manual

Specify the scan type.
❏Resolution
Specify the resolution.
❏Scale
Specify the enlargement or reduction ratio for the selected area.
Note:
If the resolution is set at 1200 
× 1200dpi or higher, a setting larger than 100% cannot be specified.
❏Scanning Mode
Select Auto or Manual. When Manual is selected, a tab appears so that detailed settings can be
specified, for example, for Brightness/Contrast and Filter.
Note:
❏The parameters that can be set differ depending on the scanning mode that is selected.
❏If...

❏AutoCrop icon
Click to automatically detect the scanning position based on the preview image.
❏Zoom icon
Click to rescan the area selected in the preview window and enlarge it to fit the window.
❏Mirror icon
Click to display a mirror image of the preview image.
❏Tone Reversal icon
Click to reverse the colors of the preview image.
❏Clear icon
Click to erase the preview image.
❏Preview window
Displays a preview image. Drag the rectangle over the image to select an area.
❏Before/After (RGB)
Move the...

Select this setting when scanning in grayscale.
❏Black and white picture or text
Select this setting when scanning in black and white.
❏Custom Settings
Select this setting when scanning with Adjust the quality of the scanned picture settings applied.
Note:
If settings have been specified with Adjust the quality of the scanned picture, Custom Settings is
automatically selected.
❏Adjust the quality of the scanned picture
Click this message to display the Advanced Properties dialog box. In the Advanced...

Macintosh TWAIN Driver Settings
❏Load
Load a saved settings file (dat file) for scanning.
❏Save
Save the current settings as a settings file (dat file).
❏Default
Return all settings to their defaults.
❏Help icon
Click to display the Help.
❏About icon
Click to display the software version information.
❏Paper source (AcuLaser CX16NF only)
Select whether documents are placed on the original glass or loaded into the ADF.
❏Original Size
Specify the original size.
❏Scan Type
Specify the scan type.
❏Resolution...

❏Scanning Mode
Select Auto or Manual. When Manual is selected, a tab appears so that detailed settings can be
specified, for example, for Brightness/Contrast and Filter.
Note:
❏The parameters that can be set differ depending on the scanning mode that is selected.
❏If Auto is selected as the scanning mode, scanning from the original glass is performed after a prescan
is performed so that a preview image can be checked.
❏Image size
Shows the data size of the scan image.
❏Rotation
Select the orientation of...

Click to reverse the colors of the preview image.
❏Clear icon
Click to erase the preview image.
❏Preview window
Displays a preview image. Drag the rectangle over the image to select an area.
❏Before/After (RGB)
Move the pointer in the preview window to display the color tones at the pointer’s position before and
after adjustments.
❏Width/Height
Displays the width and height for the selected area in the selected measurement units.
Scanning With the Machine (AcuLaser CX16NF only)
The machine keys can be...

Basic Scanning Operation
1. Position the document to be scanned.
Note:
For details on positioning the document, refer to “Placing a document on the original glass” on page
69 and “Loading a document into the ADF (AcuLaser CX16NF only)” on page 71.
2. Press the Scan key to enter Scan mode.
3. Specify the desired scan settings.
4. To scan color scans, press the Start-Color key. To scan monochrome scans, press the Start-B&W
key.
If the document was loaded in the ADF, scanning begins, and then the data is...

6. Press the u or d key to select the size of the document positioned in step 5, and then press the
Select key.
7. After all document pages have been scanned, press the Start key.
The scanned document is sent to the specified location.
Note:
❏If the Stop/Reset key is pressed while scanning, JOB CANCEL appears. To continue scanning,
select NO. To stop scanning, select YES.
❏To cancel a job where scanning was finished and the data i s  q u e u e d  t o  b e  s e n t, refer to “Deleting a
Queued...

Specifying the Destination Address (Scan to E-mail/FTP/SMB)
Scan data can be sent via the network to a specified address (e-mail address, FTP address or SMB
address). The address can be typed in directly, or an address registered on the machine can be selected.
Note:
❏To send scan data via the network, settings for NETWORK SETTING and E-MAIL SETTING (when
sending to an e-mail address) must be specified.
❏If the size of the scan data sent by e-mail exceeds the size specified with FILE SIZE, the data is...

Selecting From the Favorite List
From the speed dial destinations and group dial destinations registered on this machine, register a
maximum of 20 destinations in the favorite list for convenient access to frequently specified
destinations. Follow the procedure described below to specify an address (e-mail address, FTP address
or SMB address) from the favorite list as the recipient of the scan data.
Note:
For details on registering addresses in the favorite list, refer to “Registering in the Favorite...