Epson Aculaser CX16NF User Manual

Note:
If no paper is loaded in Tray 2, EMPTY appears to the right of the media size.
Making Advanced Copies
This section contains descriptions on setting 2in1 copying, ID card copying, repeat copying, poster
copying, duplex (double-sided) copying and collated (Sort) copying.
Note:
❏2in1 copying, duplex (double-sided) copying, and collated (Sort) copying are only for AcuLaser
CX16NF.
❏ID card copying, repeat copying or poster copying cannot be set at the same time that 2in1 copying,
duplex (double-sided)...

2in1 Copying From the Original Glass
1. In the main screen (Copy mode), press the u or d key to select the current page layout setting, and
then press the Select key.
2. Press the u or d key to select 2in1, and then press the Select key.
The zoom ratio is automatically set according to the specified media size. Change the zoom ratio if
necessary.
3. Position the first page of the document on the original glass.
Note:
For details on positioning the document on the original glass, refer to “Placing a...

❏ID card copying, repeat copying and poster copying can only be performed with the original glass.
Position the document pages to be scanned so that they are aligned in the upper-left corner of the
original glass. Since the image is printed 4 mm from the top and left side, adjust the position of the
document as necessary. For details on positioning the document on the original glass, refer to
“Placing a document on the original glass” on page 69.
ID Card Copying
With ID card copying, the back and front...

2. In the main screen (Copy mode), press the u or d key to select the current copy function setting,
and then press the Select key.
3. Press the u or d key to select ID CARD COPY, and then press the Select key.
4. To print color copies, press the Start-Color key. To print monochrome copies, press the Start-
B&W key.
Scanning of the document begins.
5. When NEXT PAGE? appears, position the back side of the document at the same location as the
front side, and then press the Select key.
After the back side...

5. To print color copies, press the Start-Color key. To print monochrome copies, press the Start-
B&W key.
6. Use the keypad to type in the document length, and then press the Select key.
Note:
To change the document size, press the Back key to delete the current size, and then use the keypad to
specify the desired size.
7. Use the keypad to type in the document width, and then press the Select key.
After the document has been scanned, printing automatically begins.
Note:
To change the document size,...

3. Press the u or d key to select POSTER COPY, and then press the Select key.
4. To print color copies, press the Start-Color key. To print monochrome copies, press the Start-
B&W key.
After the document has been scanned, printing automatically begins.
Setting Duplex (Double-Sided) Copying (AcuLaser CX16NF only)
In order to perform double-sided copying, the duplex option must be installed on the machine.
Note:
For details on installing the duplex option, refer to “Duplex Unit with Attachment (Duplex...

Duplex (Double-Sided) Copying From the Original Glass
Duplex (double-sided) copying can also be performed by placing the document on the original glass.
1. Position the document on the original glass.
Note:
For details on positioning the document on the original glass, refer to “Placing a document on the
original glass” on page 69.
2. In the main screen (Copy mode), press the u or d key to select the current duplex setting, and then
press the Select key.
3. Press the u or d key to select LONG EDGE or...

Setting Collated (Sort) Copying (AcuLaser CX16NF only)
With collated (Sort) copying, multiple copies of multi-page documents can be printed in order and
sorted by copy set.
Collated (Sort) Copying From the ADF
1. In the main screen (Copy mode), press the u or d key to select the current Sort setting, and then
press the Select key.
2. Press the u or d key to select SORT, and then press the Select key.
The main screen (Copy mode) appears again.
Collated (Sort) Copying From the Original Glass
1. Position...

Chapter 6
Using the Scanner
Scanning From a Computer Application
Documents can be scanned from a computer connected to this machine with a USB cable or via a
network (AcuLaser CX16NF only). Scanning settings can be specified and the scanning operation can
be performed from TWAIN- or WIA-compatible applications. From the scanner driver, a preview
can be displayed and various adjustments, such as the size of the scan area, can be specified.
Install Desktop Experience in advance to use the scanner driver on...

Note:
For details on positioning the document, refer to “Placing a document on the original glass” on page
69 and “Loading a document into the ADF (AcuLaser CX16NF only)” on page 71.
2. Start the application to be used for scanning.
3. Start the scanner driver according to the application settings.
4. Specify the necessary scanner driver settings.
5. Click the Scan button in the scanner driver.
Windows TWAIN Driver Settings
❏Load
Load a saved settings file (dat file) for scanning.
❏Save
Save the current...