Epson AcuLaser CX11NFCT User Manual

Accessing the Setup Menu71
To go back a level, press the l button.
An 
✽ asterisk appears next to the selected value. 
You can select the following settings from the Setup menu. 
4. To exit Setup mode:
■Press the Copy,  Fax, or Scan button to switch to the 
corresponding mode.
■Press the Setup button again to switch to Print mode.
Menu Descriptions
Note: 
Some menus and items appear only when an optional device is installed or another 
setting has been selected.
Information
This menu lets you check the...

72Using the Control Panel
Press the u or d button to select an item. Press the r button to print a sheet or font 
sample.
1 Appears only when the network interface board is installed
2 Display only 
Tray Menu
This menu lets you specify the size and type of paper you loaded in the MP tray and 
the type of paper you loaded in the optional Paper Cassette. It also displays the size of 
paper in the cassette. 
ItemSettings Description 
Status Sheet – Prints a status sheet, showing current printer 
settings...

Accessing the Setup Menu73 Setup Menu
This menu lets you select various basic configuration settings and select the LCD 
screen language.
MP Type Plain, SemiThk (Semi-thick), 
Letterhead, Recycled, Color, 
Trnsprncy (Transparency), LabelsSelect the paper type you loaded in the 
MP tray.
LC1 Type Plain, SemiThk (Semi-thick), 
Letterhead, Recycled, ColorSelect the paper type you loaded in the 
standard and optional paper cassettes.
ItemSettings Description 
Lang (Display 
Language)English, French, German,...

74Using the Control Panel
Reset Menu
This menu lets you cancel printing and reset the printer settings.
LCD Contrast 0 to 15 Adjusts the contrast of the LCD screen. Use 
the u and d buttons or the numeric keypad to 
set the contrast between 0 (lowest contrast) 
and 15 (highest contrast.)
Time Setting 
(CX11NF only)MM/DD/YY, HH/MM Specifies the date and time used in fax 
communications. The letters MM, DD, YY, 
HH, and MM indicate the Month, Date, Year, 
Hour, and Minute respectively. To specify the 
date...

Accessing the Setup Menu75 USB Menu
These settings control communication between the CX11N and the computer when 
they are connected using a USB interface. Some items may not appear unless 
corresponding devices are installed.
After these settings are changed, the new settings don’t take effect until after a reset or 
after the power is turned off and on again, even though it is shown on the Status 
Sheet. 
Network Menu
These settings control communication with the CX11N when it is connected to a...

76Using the Control Panel
Copy Settings
To access this menu, press the Setup button, press the u or d button to select 
Copy Settings, then press the r button. 
This menu lets you reset just the copy settings to their default or factory settings.  
Printing a Status Sheet
To confirm the current status of the CX11N and verify that options are installed 
correctly, you may want to print a status sheet.
1. Make sure the CX11N is turned on. 
2. Press the 
Setup button. The Setup light turns on and the Setup...

Canceling Printing, Scanning, or Copying77
Canceling Printing, Scanning, or Copying
You can cancel printing, scanning, or copying, using the yCancel button or the 
Reset menu. 
Using the Cancel Button
The yCancel button is the quickest and easiest way to cancel printing, scanning, or 
copying. Press the button once to cancel the current job. Press and hold the button 
for more than three seconds to delete all jobs from memory, including jobs the 
CX11N is currently receiving or printing.
Using the Reset...

78Using the Control Panel
 

Maintenance79
Maintenance 7
This chapter describes the parts of the product, how to replace the toner cartridges 
and photoconductor, how to clean the CX11N, and how to order more toner. 
Identifying the Product Parts
Auto Document 
Feeder 
(CX11NF only)
Cover 
(CX11NF only)Paper stopper 
(CX11NF only)
Output tray
Extension tray
Control panel
Cover A
MP trayCover C
Cover B
Option cover
Power switch
 

80Maintenance
Cover F
Handle
AC inlet
Cover E
USB connector
Network interface 
connector  Telephone interface connectors 
(CX11NF only)
Cleaner cover
Fuser 
Paper guides 
(MP tray)
Photoconductor access 
lever
Photoconductor 
Cleaning knob access 
lever 
Toner cartridge