Epson AcuLaser CX11NFCT User Manual

Using Epson Status Monitor 331
2. Select Printer Settings from the pop-up menu, then select the Utility tab. 
3. Click your printer’s icon. You see a window like this: 
Click your 
printer’s icon 
 

32Printing
You can monitor printer status and see information on toner levels, paper levels, and 
the remaining life of the photoconductor.
Note: 
This screen may vary depending on your operating system version.
Canceling Printing
If you need to cancel printing, follow the steps for your operating system below. 
Windows
Double-click the   printer icon in your taskbar. Select the print job in the list, then 
open the 
Document menu and click Cancel. 
After the last page is output to the tray, the 
Print...

Network Printing for Macintosh33
Macintosh 
To cancel printing, open the Printer Setup Utility (Mac OS® X 10.3 or 10.4) or 
Print Center (Mac OS X 10.2) and double-click your printer in the print queue. 
Then select 
Delete Job from the jobs menu.
After the last page is output to the tray, the 
Print (green) light turns on. The current 
job is canceled.
You can also cancel the current print job by pressing the 
yCancel button on the 
control panel. Be careful not to cancel print jobs sent by other...

34Printing
6. Select the following: 
■EPSON Scan 
■Printer Driver 
■EPSON Status Monitor 3
■User’s Guide
Then click Install. 
7. Follow the prompts to install the software. 
Note: If you are asked to restart your computer, click No.
8. Open the Applications folder, then open the Utilities folder and double-click 
Printer Setup Utility (OS X 10.3.x or 10.4.x) or Print Center (OS X 10.2.x).
9. Click the 
Add button. 
10. In OS X 10.4.x, select 
AL-CX11.
In OS X 10.2.x to 10.3.x, select 
Rendezvous and...

Copying35
Copying4
This chapter describes how to make basic copies, customize settings for special copy 
jobs, and cancel copying, if necessary. 
Basic Copying
Follow these steps to make a basic copy: 
1. Make sure the product is turned on and paper is loaded. For instructions on 
loading paper, see page 7.
2. Place your original on the document table or in the Auto Document Feeder 
(CX11NF only). For instructions, see page 14. 
3. Press the 
Copy button on the control panel.
The Copy light turns on. The...

36Copying
5. Press the xB&W Start (to make a black-and-white copy) or xColor Start 
button (to make a color copy).
Note: 
If you press 
the xB&W Start button twice quickly, copying starts sooner but 
print quality may be of lower quality than normal. 
Caution: 
Do not turn off the power or press another mode button during copying; 
otherwise your copy may be incorrect. 
Canceling Copying
To cancel a copy job in progress, press the yCancel button. The LCD screen 
displays 
Cancel Print Job and the copy...

Customizing Copy Settings37
Selecting the Paper Size
You can specify the size of paper you loaded in the MP tray or the optional paper 
cassette unit. 
Follow these steps to specify the paper size: 
1. Make sure that the product is in Copy mode. If not, press the 
Copy button to 
enter the Copy mode.
2. Press the 
u or d button several times to select Paper Size.
3. Press the l or r button several times until your desired paper size is displayed.
For the MP tray, you can select a paper size from 
MP A4,...

38Copying
Adjusting the Lightness or Darkness
You can adjust the lightness or darkness of your copy (density) by selecting from 7 
levels (–3 to 3). The higher the level, the darker the image. The default level is 0. 
1. Make sure the product is in Copy mode. If not, press the 
Copy button.
2. Press the 
u or d button several times to select Density.
The current Density value is highlighted. 
3. Press the 
r button to darken the copy. Press the l button to lighten the copy. 
Adjusting the Contrast
You...

Customizing Copy Settings39
Enlarging or Reducing the Copy Size 
You can adjust the copy size by selecting a specific zoom ratio or a specific percentage 
for enlargement or reduction (25 to 400%). The default zoom ratio is 100%.
1. Make sure the product is in Copy mode. If not, press the 
Copy button.
2. Press the 
u or d button several times to select Zoom. The current Zoom value is 
highlighted. 
3. Press the 
l or r button to select a zoom ratio. The following zoom ratios are 
available:
Or specify...

40Copying
Copying 2 Pages on One Sheet 
You can copy two pages of a single-sided document and the CX11N automatically 
reduces them to fit on one sheet.
Note: When you use 2 Pages per Sheet you must set the Zoom to 100%.
1. Make sure that the product is in Copy mode. If not, press the Copy button.
2. Place the first page of your original on the document table or place your entire 
original document in the Auto Document Feeder (CX11NF only). For 
instructions, see page 14. 
3. Press the 
Menu button. The...