Home > Epson > Printer > Epson AcuLaser C2900DN User Manual

Epson AcuLaser C2900DN User Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Epson AcuLaser C2900DN User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1734 Epson manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							Toner Refresh
    Purpose:
    To clean the toner in each toner cartridge.
    Values:
    Yellow CrtrdgCleans the toner in the yellow toner cartridge.
    Magenta CrtrdgCleans the toner in the magenta toner cartridge.
    Cyan CrtrdgCleans the toner in the cyan toner cartridge.
    Black CrtrdgCleans the toner in the black toner cartridge.
    Drum Refresh
    Purpose:
    To clean the surface of the drum cartridge.
    Initialize NVM
    Purpose:
    To initialize the non-volatile (NV) memory. After executing this function and rebooting the printer,
    all the menu parameters are reset to their default values.
    See Also:
    “Resetting to Factory Defaults” on page 140.
    Init Print Meter
    Purpose:
    To initialize the print meter of the printer. When the print meter is initialized, the meter count is reset
    to zero.
    Reset Fuser
    Purpose:
    To initialize the Machine Control Unit life counter.
    Clear Storage
    Note:
    Clear Storage feature is available only when the 512 MB additional memory module is installed.
    Epson AcuLaser C2900 Series     User’s Guide
    Using the Operator Panel Menus     131
     
    						
    							Purpose:
    To clear all files stored as Secure Print, Sample Print, and Stored Print in the RAM disk.
    Values:
    All ClearDeletes all files stored as Secure Print and Sample Print in the RAM disk.
    Secure DocumentDeletes all files stored as Secure Print in the RAM disk.
    Stored DocumentDeletes all files stored as Stored Print in the RAM disk.
    Non-Genuine
    Purpose:
    To use toner cartridge of another manufacturer.
    Note:
    Using a non-Epson toner cartridge may severely damage your printer. The warranty does not cover
    damages caused by using non-Epson toner cartridges.
    Values:
    Toner Off*Does not use toner cartridge of another manufacturer.
    OnUses toner cartridge of another manufacturer.
    Adjust Altitude
    Purpose:
    To specify the altitude of the location where the printer is installed.
    The discharge phenomenon for charging the photo conductor varies with barometric pressure.
    Adjustments are performed by specifying the altitude of the location where the printer is being used.
    Note:
    An incorrect altitude adjustment setting leads to problems such as poor printing quality and incorrect
    indication of remaining toner.
    Epson AcuLaser C2900 Series     User’s Guide
    Using the Operator Panel Menus     132
     
    						
    							Values:
    0m*Sets the altitude of the location where the printer is installed.
    1000m
    2000m
    3000m
    Secure Settings
    Use the Secure Settings menu to set a password to limit access to the menus. This prevents items
    from being changed accidentally.
    Note:
    Values marked by an asterisk (*) are the factory default menu settings.
    Panel Lock
    Purpose:
    To set a limited access to Admin Menu with a password, and to set or change the password.
    See Also:
    “Panel Lock Function” on page 139
    Values:
    Panel Lock Set Disable*Disables password protection for Admin Menu.
    EnableEnables password protection for Admin Menu.
    Change Password
    *10000–9999Sets or changes the password required to access Admin Menu.
    *1This item is available only when Panel Lock Set is set to Enable.
    Login Error
    Note:
    Login Error feature is available only when Panel Lock Set is set to Enable.
    Purpose:
    To specify the number of error entry attempts allowed when you log in as an administrator in the
    Admin Menu and Report/List menu.
    Epson AcuLaser C2900 Series     User’s Guide
    Using the Operator Panel Menus     133
     
    						
    							Values:
    Off*Does not allow an administrator to log in after one error entry attempt.
    On 5 times*Sets the number of error entry attempts allowed when an administrator logs
    in.
    1-10
    Tray Settings
    Use the Tray Settings menu to define the print media loaded in the standard 250-sheet tray and the
    optional 250-sheet paper cassette unit.
    Note:
    Values marked by an asterisk (*) are the factory default menu settings.
    Tray 1
    Purpose:
    To specify the paper loaded in the standard 250-sheet tray.
    Epson AcuLaser C2900 Series     User’s Guide
    Using the Operator Panel Menus     134
     
    						
    							Values:
    Paper Size
    mm seriesA4 - 210x297*
    A5 - 148x210
    B5 - 182x257
    Letter - 8.5x11
    US Folio-8.5x13
    Legal - 8.5x14
    Executive
    Monarch Env.
    Monarch Env. L
    DL Env- 110x220
    DL Env. L
    C5 Env- 162x229
    #10Env- 4.1x9.5
    New Custom Size Portrait (Y)297 mm* Specifies the length
    of the custom size
    paper. 127 - 355 mm
    Landscape (X)210 mm* Specifies the width
    of the custom size
    paper. 77 - 215 mm
    Epson AcuLaser C2900 Series     User’s Guide
    Using the Operator Panel Menus     135
     
    						
    							inch series
    Letter - 8.5x11*
    US Folio-8.5x13
    Legal - 8.5x14
    A4 - 210x297
    A5 - 148x210
    B5 - 182x257
    Executive
    Monarch Env.
    Monarch Env. L
    DL Env- 110x220
    DL Env. L
    C5 Env- 162x229
    #10Env- 4.1x9.5
    New Custom Size Portrait (Y)11.7 inch* Specifies the length
    of the custom size
    paper. 5.0-14.0 inches
    Landscape (X)8.3 inch* Specifies the width
    of the custom size
    paper. 3.0-8.5 inches
    Epson AcuLaser C2900 Series     User’s Guide
    Using the Operator Panel Menus     136
     
    						
    							Paper Type Plain*
    Light Card
    Heavy Card
    Envelope
    Labels
    Letterhead
    LW Gloss Card
    HW Gloss Card
    Hole Punched
    Colored
    Special
    Display Screen OffDoes not display a popup menu that prompts to set Paper Type and
    Paper Size when paper is loaded in the standard 250-sheet tray.
    On*Displays a popup menu that prompts to set Paper Type and Paper
    Size when paper is loaded in the standard 250-sheet tray.
    *1The default for Paper Size varies depending on country-specific factory default.
    Note:
    For more information on supported paper sizes, see also “Usable Print Media” on page 69.
    Tray 2
    Note:
    Tray 2 feature is available only when the optional 250-sheet paper cassette unit is installed.
    Purpose:
    To specify the paper loaded in the optional 250-sheet paper cassette unit.
    Epson AcuLaser C2900 Series     User’s Guide
    Using the Operator Panel Menus     137
     
    						
    							Values:
    Paper Size
    mm seriesA4 - 210x297*1
    A5 - 148x210
    B5 - 182x257
    Letter - 8.5x11
    US Folio - 8.5x13
    Legal - 8.5x14
    Executive
    inch series
    Letter - 8.5x11
    *1
    US Folio - 8.5x13
    Legal - 8.5x14
    A4 - 210x297
    A5 - 148x210
    B5 - 182x257
    Executive
    Paper Type Plain*
    Letterhead
    Hole Punched
    Colored
    Display Screen OffDoes not display a popup menu that prompts to set Paper Type and
    Paper Size when paper is loaded in the optional 250-sheet paper
    cassette unit.
    On*Displays a popup menu that prompts to set Paper Type and Paper
    Size when paper is loaded in the optional 250-sheet paper cassette
    unit.
    *1The default for Paper Size varies depending on country-specific factory default.
    Note:
    For more information on supported paper sizes, see also “Usable Print Media” on page 69.
    Epson AcuLaser C2900 Series     User’s Guide
    Using the Operator Panel Menus     138
     
    						
    							Panel Lock Function
    This feature prevents unauthorized users from changing settings made by the administrator.
    However, you can select settings for individual print jobs using the print driver.
    Enabling the Panel Lock
    1. Press the  (Menu) button.
    2. Select Admin Menu, and then press the 
     button.
    3. Select Secure Settings, and then press the 
     button.
    4. Select Panel Lock, and then press the 
     button.
    5. Select Panel Lock Set, and then press the 
     button.
    6. Select Enable, and then press the 
     button.
    7. Enter the new password, and then press the 
     button.
    8. Re-enter the password to confirm the password that you entered, and then press the 
     button.
    Note:
    ❏The factory-default panel password is 0000.
    ❏If you forget your password, turn off the printer. Then, while holding the 
     (Menu) button, turn on
    the printer. Continue to hold the 
     (Menu) button until the display indicates to enter the new
    password. Enter the new password, and then press the 
     button. Re-enter the password, and then
    press the 
     button. The display will briefly indicate the password has been initialized.
    ❏If you change the password, perform steps 1 to 2. Enter the current password, and then press the 
    button. Perform steps 3 to 4. Select Change Password, and then press the  button. Enter the
    current password, and then press the 
     button. Perform steps 7 and 8. This will change the
    password.
    Disabling the Panel Lock
    1. Press the  (Menu) button.
    2. Select Admin Menu, and then press the 
     button.
    Epson AcuLaser C2900 Series     User’s Guide
    Using the Operator Panel Menus     139
     
    						
    							3. Enter the password, and then press the  button.
    4. Select Secure Settings, and then press the 
     button.
    5. Select Panel Lock, and then press the 
     button.
    6. Select Panel Lock Set, and then press the 
     button.
    7. Select Disable, and then press the 
     button.
    8. Enter the current password, and then press the 
     button.
    Setting the Power Saver Time Option
    You can set the power saver time for the printer. The printer switches to the Power Saver mode after
    the specified time.
    1. Press the 
     (Menu) button.
    2. Select Admin Menu, and then press the 
     button.
    3. Select System Settings, and then press the 
     button.
    4. Select Power Saver Time, and then press the 
     button.
    5. Select Low Power Timer or Sleep Timer, and then press the 
     button.
    6. Press the 
     or  button or enter the desired value, and then press the  button.
    You can select from 3–60 minutes for Low Power Timer or 1–6 minutes for Sleep Timer.
    7. To return to the previous screen, press the 
     (Back) button.
    Resetting to Factory Defaults
    After executing Initialize NVM and rebooting the printer, all the menu parameters or data are reset to
    their default values.
    1. Press the 
     (Menu) button.
    Epson AcuLaser C2900 Series     User’s Guide
    Using the Operator Panel Menus     140
     
    						
    All Epson manuals Comments (0)

    Related Manuals for Epson AcuLaser C2900DN User Manual