Epson AcuLaser C1750N User Manual

MessageWhat You Can Do
Insert
Yellow CartridgeRe-install the specified toner cartridge.
See also:
“Replacing Toner Cartridges” on page 201
Insert
MagentaCartridge
Insert
Cyan Cartridge
Insert
Black Cartridge
MACaddress Error
Restart Printer
Error 116-314
Restart PrinterTurn off the printer, and then on. If this does not solve the problem, contact the
Epson local representative office or an authorised dealer.
See also:
“Contacting Epson Support” on page 216
RAM Error
Restart Printer
Error 116-315
Restart...

MessageWhat You Can Do
ASIC Error
Restart Printer
Error 116-343
Restart PrinterTurn off the printer, and then on. If this does not solve the problem, contact the
Epson local representative office or an authorised dealer.
See also:
“Contacting Epson Support” on page 216
Network Error
Restart Printer
Error 116-350
Restart Printer
Network Error
Restart Printer
Error 116-351
Restart Printer
Network Error
Restart Printer
Error 116-352
Restart Printer
Network Error
Restart Printer
Error 116-355
Restart...

MessageWhat You Can Do
Error 191-310
Restart PrinterThe printer has reached the end of its service life, which is defined by the number of
sheets printed out, and printing is not possible. The printing may leak toner or the
image quality of the printouts may be degraded after this error occurs.
See also:
“Contacting Epson Support” on page 216
(Printer Status)
Non-GenuineTonerThis message indicates the printer is in the Non GenuineToner mode.
Contacting Service
When you call for printer service, be...

 Status Monitor Alerts
The Status Monitor is a tool that is included on the Software Disc. It automatically checks the printer
status when you send a print job. If the printer is unable to print your job, the Status Monitor
automatically displays an alert on your computer screen to let you know that the printer needs
attention.
Non Genuine Toner Mode
When toner within a toner cartridge is end of its service life, the Replace XXXX Cartridge or Empty
XXXX Cartridge (XXXX: Yellow, Magenta, Cyan, or Black)...

6. Press the  button until the top page is displayed.
The printer switches to the Non-GenuineToner mode.
The Printer Setting Utility
The following procedure uses Windows XP as an example.
1. Click start — All Programs — EPSON — EPSON Printer Software — EPSON AL-C1750N /
EPSON AL-C1750W — Printer Setting Utility.
Note:
The Select Printer window appears in this step, when multiple print drivers are installed on your
computer. In this case, click the name of the desired printer listed in Printer Name.
The...

Chapter 8
Maintenance
Cleaning the Printer
This section describes how to clean the printer in order to maintain it in good condition and print
clean printouts all the time.
w
Warning:
When cleaning this product, use the designated cleaning materials exclusive to it. Other cleaning
materials may result in poor performance of the product. Never use aerosol cleaners, or it may
catch fire and cause explosion.
c
Caution:
When cleaning this product, always switch off and unplug it. Access to a live machine...

3. Pinch the toner cartridge firmly as shown in the illustration.
4. Pull the toner cartridge out.
Important:
Always pull the toner cartridge out slowly so you do not spill any toner.
5. Pull the other three toner cartridges out as well.
Epson AcuLaser C1750 Series     User’s Guide
Maintenance     197
 

6. Pull the print head cleaning rod out.
7. Insert the print head cleaning rod fully into the hole beside the arrow on the printer until its tip
reaches the interior of the printer as illustrated below, and then pull it out.
8. Repeat the same procedure for the other three holes.
9. Return the print head cleaning rod to its original location.
Epson AcuLaser C1750 Series     User’s Guide
Maintenance     198
 

10. Replace the black toner cartridge by adjusting it to the associated cartridge holder, and then insert
it firmly by pressing near the center of the label until the toner cartridge clicks.
11. Replace the other three toner cartridges as well.
12. Close the toner access cover.
Cleaning the Color Toner Density (CTD) Sensor
Clean the CTD sensor only when an alert for the CTD sensor is shown on the Status Monitor window
or operator panel.
1. Ensure that the printer is turned off.
Epson AcuLaser C1750...

2. Push the rear cover handle and open the rear door.
3. Clean the CTD sensor inside the printer with a clean dry cotton swab.
4. Close the rear door.
Epson AcuLaser C1750 Series     User’s Guide
Maintenance     200