Electrohome Vistagraphx 10k Roadie Users Manual

23(5$7,21
9LVWD*5$3+;#43.#8VHU*V#0DQXDO6047
displayed, the arrow
  keys still operate any current slidebar or pull-down list in
view, such as Brightness or Color Temperature.
From presentation level, press 
+HOS to
access General Help information.
Press 
([L W to return to presentation
level.
Whenever the projector is not at presentation level, such as when there is a
slidebar, menu, message or test pattern displayed, you have limited time in which
to make a keypad entry before the projector returns to...

23(5$7,21
9LVWD*5$3+;#;3343.HU*V#0DQXDO6048
slidebars, such as pixel tracking/pixel phase or horizontal/vertical position, press
(QWHU to select, then 21 or 2)) to adjust the second slidebar setting (see below).
Press 
(QWHU when done. For fast adjustment, hold down the desired arrow key.
´LUHFWµ#6OLGHEDUV#0 For quick access, you can go directly to a slidebar (or
double slidebar) without using the menu system. For example, simply press 
&RQW
to immediately display the same contrast slidebar accessed with...

23(5$7,21
9LVWD*5$3+;#43.#8VHU*V#0DQXDO6049
NOTES: 1) Press  or  to jump between “pages” in a long pull-down
list. 2) Press 
([L W while in a pull-down list to cancel any change.
To enter or edit text (such as a channel name), highlight the desired parameter
and press 
(QWHU to bring up an edit window. Current text is displayed in the text
box at the top of the menu. Selectable characters for editing are displayed in a
large central character box, and other function buttons appear at the bottom.
Navigate...

23(5$7,21
9LVWD*5$3+;#;3343.HU*V#0DQXDO604:
Enter numbers directly from the keypad in order to specify numbers representing
projectors, sources (channels), switchers or slots.
NOTES: 1) Once you enter the first digit, the digit replaces all old digits. 2) If
you press any non-numbered key, the number entered up to that point is
accepted and updated as the new value. 3) Press 
([L W to cancel editing.
NOTE: See 
Section 2, Installation and Setup, for a full explanation of how to
connect sources to the...

23(5$7,21
9LVWD*5$3+;#43.#8VHU*V#0DQXDO604;
&+$11(/#0 A channel is a collection of measurements and settings that tailor a
display to your specific needs. Since source types and applications vary greatly,
you will likely want to adjust and define a wide variety of parameters, such as
brightness, contrast, tint, etc., in order to customize and maximize the display
coming from that source. For example, the display settings you choose for a
VCR source may be very different from those you choose for a high...

23(5$7,21
9LVWD*5$3+;#;3343.HU*V#0DQXDO604<
Use the scroll bar to see and work with any additional channels not visible in the
table.
)LJXUH#60;1#&KDQQHO#/LVW#0HQX
Beneath the Channel List window, select the New button, which will store the
current signal as a channel with the following defaults assigned:
· channel number = the lowest unassigned number (up to 99).
· switcher (SW) number = 0 (represents the projector itself). Or, if the input
source is connected to a switcher, the default will be the...

23(5$7,21
9LVWD*5$3+;#43.#8VHU*V#0DQXDO6053
You can edit the setup information assigned to a channel. For example, you can
change its number or name (such as VHS#1 or My PC), or you can change
the switcher number, slot number, etc. pertaining to a specific source, or you can
add the channel to your 
&KDQ key list.
From the presentation level press 
0HQX to bring up the main menu. Enter
  or
move the highlight to the Channel List icon and press (QWHU to call up the Channel
List menu.
Highlight and select...

23(5$7,21
9LVWD*5$3+;#;3343.HU*V#0DQXDO6054
channel is locked, a confirmation box will appear to remind you that the channel
is currently locked and to ask if you are sure you want to delete it (OK or
Cancel).
To delete all channels, select the on-screen
Delete All button and press 
(QWHU on keypad. A
confirmation box will appear to ensure that you
really want to delete all channels (select OK,
Unlocked Only, or Cancel). Select OK
only if you really want to delete
all channels, regardless of whether
they...

23(5$7,21
9LVWD*5$3+;#43.#8VHU*V#0DQXDO6055
Select any of the following slidebars or pull-down lists to alter your image. Refer
to Using Slidebars and Other Controls (earlier in this section) if you need help
in selecting options and accepting changes. Changes made to the Size / Position
menu will be saved when you exit the menu (press 
([L W or 0HQX ).
)LJXUH#60

23(5$7,21
9LVWD*5$3+;#;3343.HU*V#0DQXDO6056
sampled. Proper pixel tracking ensures that the image is of the correct proportion
and not stretched or compressed from left-to-right.
NOTE:  By default, the projector samples at the correct frequency for a given
source. For best results, it is recommended that this default not be overridden.
Pixel tracking is adjusted most effectively using a good test pattern, such as a
smooth gray image made up of a clear pattern of tiny black and white dots, or a
similar...