Eizo Coloredge Cg211 Users Manual

							
7.Horizontal bars of 
distortion appear.[ ]Decrease the horizontal bars using the 
<
Phase>. 
8. Letters and lines appear 
blurred.[ ]Adjust the blurred lines using .
9. Distortion appears like the 
figure below.[ ]This happends when both composite (X-OR) 
input signal and separate vertical 
synchronizing signal are input. Please select 
one of the two.
10. The screen is too bright 
or too dark.[ ]Adjust the  (The backlight of 
the LCD monitor has a fixed life span. When 
the screen becomes dark or begins to flicker, 
please consult your dealer.)
11. Afterimages appear.[ ]When the screen image is changed after 
displaying the same image for a long period, 
an afterimage may appear. The Afterimage 
can be removed gradually by changing the 
displayed image. Use the <
Off Timer> 
function and avoid keeping the screen on all 
the time.
12. The screen has defective 
pixels (e.g. slightly light 
or dark).[ ]This is due to the characteristics of the panel 
itself, and not the LCD product.
13. Fingerprints remain on 
the screen.[ ]Leaving the screen white may solve the 
problem.  
14. The noise appears on the 
screen.[ ]Change the mode in  in the 
 menu.
 
						

							
15.The  cannot 
be selected.[ ] is disabled when the screen is 
displayed in the 1600 x 1200.
[ ]  is disabled when Normal is 
selected in the  menu.
[ ] The image size is doubled both in 
horizontally and vertically to (i.e. 1600 x 
1200 enlarged from 800 x 600) provide clear 
focus which does not require this function.
16. The Main menu of 
ScreenManager does not 
operate.[ ]The adjustment lock is probably on. To 
unlock: switch the LCD monitor off. Then, 
while pressing the Autadjustment button 
switch, the power on. 
17. The FineContrast mode 
does not operate.[ ]Check that the Main menu of ScreenManager 
is not activated.
18. The Auto adjustment 
button does not operate.[ ]The Auto adjustment button does not operate 
when the digital signal is input.
[ ] The adjustment lock is probably on. 
To 
unlock: switch the LCD monitor off. Then, 
while pressing the Auto adjustment button, 
switch the power on.
19. USB function cannot be 
setup.[ ]Check that the USB cable is correctly 
connected.
[ ] Check that the PC and OS are USB 
compliant. (For verification of USB support, 
consult the manufacturer of each system.)
[ ] Check the PCs BIOS setting for USB. ( For 
details, refer to the manual of the PC.)
20. PC is hung up. / The 
peripherals connected to 
the downstream ports do 
not operate.[ ]Check that the USB cable is correctly 
connected.
[ ] Check the downstream ports by connecting 
the peripherals to other downstream ports. If 
the problem is solved by doing this, contact 
an EIZO dealer. (For details, refer to the 
manual of the PC.)
[ ] Try executing the following method.
l     Restarting the PC - Restarting the PC 
l     Connecting the PC and peripherals 
directly
 
If the problem is solved by doing this, 
contact an EIZO dealer.
 
						

							
Periodic cleaning is recommended to keep the monitor looking new and to \
prolong its 
operation lifetime.
 
*Never use thinner, benzene, alcohol (ethanol, methanol, or isopropyl al\
cohol), 
abrasive cleaners, or other strong solvents, as these may cause damage t\
o the 
cabinet or LCD panel.
 
Cabinet
To remove stains, wipe the cabinet with a soft, lightly moistened cloth \
using a mild 
detergent. Do not spray wax or cleaner directly into the cabinet. (For \
details, refer to 
the manual of the PC.)
 
LCD Panel
l     The LCD surface can be cleaned with a soft cloth, such as cotton or lens\
 paper. 
l     If necessary, stubborn stains can be removed by using the provided 
ScreenCleaner, or moistening part of a cloth with water to enhance its c\
leaning 
power.
 
 
 
						

							
LCD Panel54 cm (21.3 inch), TFT color LCD panel with Anti-Glare Hard 
Coating
Viewing Angle: H: 170°, V: 170° (at contrast ratio 1:5)
Response Time: approx.30 ms
Dot Pitch 0.270 mm 
Horizontal Scan 
Frequency Analog: 24 - 100 kHz (Automatic)
Digital: 31 - 100 kHz
Vertical Scan 
Frequency Analog: 49 - 86 Hz (Automatic)
(1600 x 1200: 49 - 76 Hz)
Digital: 59 Hz - 61Hz, (VGA Text : 69 - 71 Hz)
Resolution  1600 dots x 1200 lines
Dot Clock (Max.)  Analog: 202.5 MHz, Digital: 162 MHz
Display Colors 16 million colors (max.)
Display Area 432 mm (H) x 324 mm (V) (17.0 (H) x 12.8 (V)) (Viewable 
image size: 540 mm (21.2))
Power Supply 100-120VAC±10% 50/60 Hz, 0.75A
200-240 VAC±10%, 50 Hz, 0.4 A 
Power 
Consumption Min.: 65 W
Max: 75 W (With USB)
Power Saving Mode : Less than 2 W ( for single signal input 
without USB )
Power off : Less than 1 W
Recommended 
Brightness 100cd/m
2 or less
(with color temperature of between 5,000K to 6,500K)
Input Connector  DVI-I × 2
Analog Input 
Signal (Sync) a) Separate, TTL, Positive/Negative
b) Composite, TTL, Positive/Negative
Analog Input 
Signal (Video) 0.7Vp-p/75 ohms, Positive
Input Signal 
(Digital)  TMDS (Single Link) 
Signal registration Analog : 45 
Digital : 10 
Plug & Play VESA DDC 2B / EDID structure 1.3
Dimensions 472 mm (W) x 459 - 541 mm (H) x 208.5 mm (D)
(18.6(W) x 18.1- 21.3(H) x 8.2(D))
Dimensions 
(without stand) 472 mm (W) x 373 mm (H) x 69 mm (D)
(15.7(W) x 14.7(H) x 2.7(D))
Dimensions 
(with hood) 483.8 mm (W) x 464.3 - 546.3 mm (H) x 323mm (D)
(19(W) x 18.3- 21.5(H) x 12.7(D))
 
						

							
Weight10.2 kg (22.5 lbs.)
Weight 
(without stand) 7.0 kg (15.4 lbs.)
Weight 
(with hood) 10.8 kg (24 lbs.)
Temperature  Operating: 0 °C - 35 °C (32 °F - 95 ° F)
Storage: -20 °C - 60 °C (-4 °F - 140 ° F)
Humidity 30% to 80% R.H. Non-condensing
USB standard USB Specification Revision 2.0
USB ports Upstream port x 1, Downstream port x 2 
Default settings
Analog inputDigital input
Brightness 55%55%
Smoothing 3
Temperature 5,000K
FineContrast Mode Custom
PowerManager VESA DPMSDVI DMPM
Screen Size Full Screen
Input Priority Signal 1
Off Timer Disable
Menu Settings Menu Size
Normal
Menu Off Timer 45 seconds
ActievRotationII  Enable
Beep On
Language English
Input Selection Standard
 
 
						

							
Beeper settings
Short beepScreenManager item selected. 
ScreenManager parameter adjusted to minimum or maximum 
limit. 
Input Signal Selection button pressed.
Long beep Auto Adjustment button pressed. 
ScreenManager data-save executed.
4 short beeps Monitor not connected correctly. 
PC turned off. 
Monitor received unsupported signal frequency.
2 short beeps 
every 15 sec. Monitor is in the advance notice mode of the Off Timer. The 
power will be off within fifteen minutes.
Dimensions
Unit mm (inches)
 
 
						

							
Pin Assignment
DVI-I Connector
Pin No. Signal Pin 
No. Signal Pin 
No. Signal
1 TMDS Data 2- 11TMDS Data 
1/3 Shield 21
NC
2 TMDS Data 2+ 12NC 22TMDS Clock 
Shield
3 TMDS Data 
2/4 Shield 13
NC 23TMDS Clock+
4 NC* 14+5V Power 24TMDS Clock-
5 NC 15Ground 
(return for 
+5V, Hsync  and Vsync)  C1
Analog Red
6 DDC Clock 
(SCL) 16Hot Plug 
Detect C2
Analog Green
7 DDC Data 
(SDA) 17
TMDS Data0- C3Analog Blue
8 Analog 
Vertical Sync 18
TMDS Data0+ C4Analog Horizontal 
Sync
9 TMDS Data1- 19TMDS 
Data0/5 Shield C5Analog Ground 
(analog R, G, & B  return)
10 TMDS Data1+ 20NC
(*NC: No Connection)
USB Ports
No. Signal Remarks
1 VCC Cable power
2 -Data Serial data
3 +Data Serial data
4 Ground  Cable Ground
 
 
						

							
Afterimage
The Afterimage is particular to LCD monitors when the monitor screen is \
left on for a 
long period without use. The Afterimage can be removed gradually by ch\
anging the 
displayed image.
 
Clock
With the analog input signal display, the analog signal is converted to \
a digital signal 
by the LCD circuitry. To convert the signal correctly, the LCD monitor n\
eeds to 
produce the same number clock pulse as the dot clock of the graphics sys\
tem. When 
the clock pulse is not correctly set, some vertical bars of distortion a\
re displayed on the 
screen.
 
Color Temperature (Temperature)
Color Temperature is a method to measure the white color tone, generally\
 indicated in 
degrees Kelvin. At high temperatures the white tone appears somewhat blu\
e, while at 
lower temperatures it appears somewhat red. Computer monitors generally \
give best 
performance at high temperature settings.
5,000 K: Slightly reddish white.
6,500 K: Warm-white tone, similar to white paper or daylight.
9,300 K: Slightly bluish white.
 
 
 
						

							
DVI (Digital Visual Interface)
A digital flat panel interface. DVI can transmit digital data from the P\
C directly 
without loss with the signal transition method TMDS.
There are two kinds of DVI connectors. One is DVI-D connector for digita\
l signal 
input only. The other is DVI-I connector for both digital and analog sig\
nal inputs.
 
DVI DMPM (DVI Digital Monitor Power Management)
The Power management system for the digital interface. The Monitor ON \
status 
(operation mode) and the Active Off status (power-saving mode) are\
 indispensable 
for the DVI-DMPM as the monitors power mode.
 
Gain Adjustment
Adjusts each color parameter for red, green and blue. The color of the L\
CD monitor is 
displayed through the color filter of the LCD panel. Red, green and blue\
 are the three 
primary colors. The colors on the monitor are displayed by combining the\
se three 
colors. The color tone can change by adjusting the illumination amount p\
assed through 
each colors filter.
 
Gamma
Generally, the relationship that the light intensity values of a monitor\
 change 
nonlinearly to the input signal level is called Gamma Characteristic. \
On the monitor, 
low gamma values display the whitish images and high gamma values displa\
y the high 
contrast images.