Eizo Coloredge Cg211 Users Manual

							
 
 
SAFETY SYMBOLS
PRECAUTIONS
1. INTRODUCTION
1-1.Features
1-2.Package Contents
1-3.Controls & Connectors
2. CABLE CONNECTION
2-1.Before Connecting
2-2.Connecting the Signal 
Cable (D-Sub or DVI)
2-3.Connecting the Signal 
Cable (ADC)
2-4.Connecting Two PCs to 
the Monitor
2-5.How to install the Hood
2-6.How to remove the Tilt 
Stand
3. ScreenManager
3-1.How to use the 
ScreenManager
3-2.ScreenManager 
Adjustments and Settings
3-3.FineContrast
3-4.Useful Functions
4. ADJUSTMENT
4-1.Screen Adjustment
4-2.Displaying a low 
resolution
4-3.Color Adjustment
4-4.Power-save Setup
5. ActiveRotationII Function
6. MAKING USE OF USB 
(Universal Serial Bus)

This manual is checked under the browser settings shown 
below. Text size can change for another one through browser 
setting.
Microsoft Internet Exproler:
Text size: Medium
Encoding: Western European
 
						

							
7. TROUBLESHOOTING
8. CLEANING
9. SPECIFICATION
10. GLOSSARY
APPENDIX/ ANHANG/ 
ANNEXE
About TCO03 
FCC Declaration of 
Conformity
Hinweis zur Ergonomie/
Recycling Information/
Hinweise zur Auswahl des 
richtigen Schwenkarms für 
Ihren Monitor
 
						

							
This manual uses the safety symbols below. They denote critical informat\
ion. Please read them 
carefully.
 
WARNING
Failure to abide by the information in a WARNING may result in serious 
injury and can be life threatening.
CAUTION
Failure to abide by the information in a CAUTION may result in moderate \
injury and/or property or product damage.
Indicates a prohibited action.
Indicates to ground for safety.
 
Copyright© 2006 EIZO NANAO CORPORATION All rights reserved.
 No part of this manual may be reproduced, stored in a retrieval system,\
 or transmitted, in any 
form or by any means, electronic, mechanical, or otherwise, without the \
prior written 
permission of EIZO NANAO CORPORATION.
EIZO NANAO CORPORATION is under no obligation to hold any submitted mate\
rial or 
information confidential unless prior arrangements are made pursuant to \
EIZO NANAO 
CORPORATIONs receipt of said information Although every effort has been\
 made to ensure 
that this manual provides up-to-date information, please note that EIZO \
monitor specifications 
are subject to change without notice. 
ENERGY STAR is a U.S. registered mark.
Apple, Macintosh, Power Macintosh and Power Mac are registered trademark\
s of Apple 
Computer, Inc.
VGA is a registered trademark of International Business Machines Corpora\
tion.
DPMS is a trademark and VESA is a registered trademark of Video Electron\
ics Standards 
Association.
Windows is a registered trademark of Microsoft Corporation.
 
						

							
PowerManager is a trademark of EIZO NANAO CORPORATION.
ScreenManager, ColorEdge and EIZO are registered trademarks of EIZO NANA\
O 
CORPORATION in Japan and other countries. 
As an ENERGY STAR® Partner, EIZO NANAO CORPORATION has 
determined that this product meets the ENERGY STAR guidelines for 
energy efficiency.
Product specifications may vary depending on the region. Confirm the spe\
cifications in the 
manual written in the language of the region of purchase.
 
 
						

							
IMPORTANT!
l     This product has been adjusted specifically for use in the region to whi\
ch it 
was originally shipped. If operated outside the region to which it was o\
riginally 
shipped, the product may not perform as stated in the specifications. 
l     To ensure personal safety and proper maintenance, please read this secti\
on and 
the caution statements on the unit (refer to the figure below). 
[Location of the Caution Statements]
 
If the unit begins to emit smoke, smells like something is burning, or 
makes strange noises, disconnect all power connections immediately 
and contact your dealer for advice.
Attempting to use a malfunctioning unit may result in fire, electric sho\
ck, 
or equipment damage.
Do not open the cabinet or modify the unit.
Opening the cabinet or modifying the unit may result in fire, electric s\
hock, 
or burn.
 
						

							
Refer all servicing to qualified service personnel.
Do not attempt to service this product yourself as opening or removing 
covers may result in fire, electric shock, or equipment damage.
Keep small objects or liquids away from the unit.
Small objects accidentally falling through the ventilation slots into th\
e 
cabinet or spillage into the cabinet may result in fire, electric shock,\
 or 
equipment damage.
If an object or liquid falls/spills into the cabinet, unplug the unit 
immediately. Have the unit checked by a qualified service engineer befor\
e 
using it again.
Place the unit at the strong and stable place.
A unit placed on an inadequate surface may fall and result in injury or \
equipment damage.
If the unit falls, disconnect the power immediately and ask your dealer \
for 
advice. Do not continue using a damaged unit.  Using a damaged unit may \
result in fire or electric shock.
Set the unit in an appropriate location.
Not doing so may result in fire, electric shock, or equipment damage.
l     Do not place outdoors. 
l     Do not place in the transportation system (ship, aircraft, trains, 
automobiles, etc.)
 
l     Do not place in a dusty or humid environment. 
l     Do not place in a location where the steam comes directly on the 
screen.
 
l     Do not place near heat generating devices or a humidifier. 
To avoid danger of suffocation, keep the plastic packing bags away 
from babies and children.
 
 
						

							
Use the enclosed power cord and connect to the standard power outlet 
of your country. 
Be sure to remain within the rated voltage of the power cord.
Not doing so may result in fire or electric shock.
Power supply:  100-120/200-240 VAC±10 %, 50/60 Hz
To disconnect the power cord, grasp the plug firmly and pull.
Tugging on the cord may damage and result in fire or electric shock.
The equipment must be connected to a grounded main outlet.
Not doing so may result in fire or electric shock.
Use the correct voltage.
*   The unit is designed for use with a specific voltage only.  Connecti\
on to 
another voltage than specified in this Users Manual may cause fire, ele\
ctric 
shock, or equipment damage.
*   Do not overload your power circuit, as this may result in fire or el\
ectric 
shock.
Handle the power cord with care.
*   Do not place the cord underneath the unit or other heavy objects.
*   Do not pull on or tie the cord.
If the power cord becomes damaged, stop using it.  Use of a damaged cord\
 
may result in fire or electric shock.
Never touch the plug and power cord if it begins to thunder.
Touching them may result in electric shock.
 
						

							
When attaching an arm stand, please refer to the user’s manual of the\
 
arm stand and install the unit securely.
Not doing so may cause the unit to become unattached, which may result i\
n 
injury or equipment damage. When the unit is dropped, please ask your 
dealer for advice. Do not continue using a damaged unit.  Using a damage\
d 
unit may result in fire or electric shock. When reattaching the tilt sta\
nd, 
please use the same screws and tighten them securely.
Do not touch a damaged LCD panel directly with bare hands.
The liquid crystal that may leak from the panel is poisonous if it enter\
s the 
eyes or mouth. 
If any part of the skin or body comes in direct contact with the panel, \
please wash thoroughly.  If some physical symptoms result, please consul\
t 
your doctor.
Follow local regulation or laws for safe disposal.
The backlight of the LCD panel contains mercury.
 
Handle with care when carrying the unit.
Disconnect the power cord and cables when moving the unit.  Moving the 
unit with the cord attached is dangerous.  It may result in injury.
When handling the unit, grip the bottom of the unit firmly with both 
hands ensuring the panel faces outward before lifting.
Dropping the unit may result in injury or equipment damage.
 
						

							
Do not block the ventilation slots on the cabinet.
*   Do not place any objects on the ventilation slots.
*   Do not install the unit in a closed space.
*   Do not use the unit laid down or upside down.
Blocking the ventilation slots prevents proper airflow and may result in\
 
fire, electric shock, or equipment damage.
Do not touch the plug with wet hands.
Doing so may result in electrical shock.
Use an easily accessible power outlet.
This will ensure that you can disconnect the power quickly in case of a \
problem.
Periodically clean the area around the plug.
Dust, water, or oil on the plug may result in fire.
Unplug the unit before cleaning it.
Cleaning the unit while it is plugged into a power outlet may result in \
electric shock.
 
In order to suppress the luminosity change by long-term use and to 
maintain the stable luminosity, use of a monitor in lower brightness is \
recommended.
 
						

							
The LCD panel is manufactured using high-precision technology. 
However, note that the appearance of any missing pixels or lit pixels do\
es 
not indicate damage to the LCD monitor.
Percentage of effective pixels:99.9994%or higher.
The backlight of the LCD panel has a fixed life span. When the screen 
becomes dark or begins to flicker, please contact your dealer.
Do not press on the panel or edge of the frame strongly, as this may res\
ult 
in damage to the screen. There will be prints left on the screen if the \
pressed image is dark or black. If pressure is repeatedly applied to the\
 
screen, it may deteriorate or damage your LCD panel. Leave the screen 
white to decrease the prints.
Do not scratch or press on the panel with any sharp objects, such as a 
pencil or pen as this may result in damage to the panel. Do not attempt \
to 
brush with tissues as this may scratch the LCD panel.
When the screen image is changed after displaying the same image for 
extended periods of time, an afterimage may appear. Use the screen saver\
 
or timer to avoid displaying the same image for extended periods of time\
.
When the monitor is cold and brought into a room or the room temperature\
 
goes up quickly, dew condensation may occur inside and outside the 
monitor. In that case, do not turn the monitor on and wait until dew 
condensation disappears, otherwise it may cause some damages to it.