Eizo Coloredge Cg211 Users Manual

 
 
SAFETY SYMBOLS
PRECAUTIONS
1. INTRODUCTION
1-1.Features
1-2.Package Contents
1-3.Controls & Connectors
2. CABLE CONNECTION
2-1.Before Connecting
2-2.Connecting the Signal 
Cable (D-Sub or DVI)
2-3.Connecting the Signal 
Cable (ADC)
2-4.Connecting Two PCs to 
the Monitor
2-5.How to install the Hood
2-6.How to remove the Tilt 
Stand
3. ScreenManager
3-1.How to use the 
ScreenManager
3-2.ScreenManager 
Adjustments and Settings
3-3.FineContrast
3-4.Useful Functions
4. ADJUSTMENT
4-1.Screen Adjustment...

7. TROUBLESHOOTING
8. CLEANING
9. SPECIFICATION
10. GLOSSARY
APPENDIX/ ANHANG/ 
ANNEXE
About TCO03 
FCC Declaration of 
Conformity
Hinweis zur Ergonomie/
Recycling Information/
Hinweise zur Auswahl des 
richtigen Schwenkarms für 
Ihren Monitor
 

This manual uses the safety symbols below. They denote critical informat\
ion. Please read them 
carefully.
 
WARNING
Failure to abide by the information in a WARNING may result in serious 
injury and can be life threatening.
CAUTION
Failure to abide by the information in a CAUTION may result in moderate \
injury and/or property or product damage.
Indicates a prohibited action.
Indicates to ground for safety.
 
Copyright© 2006 EIZO NANAO CORPORATION All rights reserved.
 No part of this manual may be...

PowerManager is a trademark of EIZO NANAO CORPORATION.
ScreenManager, ColorEdge and EIZO are registered trademarks of EIZO NANA\
O 
CORPORATION in Japan and other countries. 
As an ENERGY STAR® Partner, EIZO NANAO CORPORATION has 
determined that this product meets the ENERGY STAR guidelines for 
energy efficiency.
Product specifications may vary depending on the region. Confirm the spe\
cifications in the 
manual written in the language of the region of purchase.
 
 

IMPORTANT!
l     This product has been adjusted specifically for use in the region to whi\
ch it 
was originally shipped. If operated outside the region to which it was o\
riginally 
shipped, the product may not perform as stated in the specifications. 
l     To ensure personal safety and proper maintenance, please read this secti\
on and 
the caution statements on the unit (refer to the figure below). 
[Location of the Caution Statements]
 
If the unit begins to emit smoke, smells like something is...

Refer all servicing to qualified service personnel.
Do not attempt to service this product yourself as opening or removing 
covers may result in fire, electric shock, or equipment damage.
Keep small objects or liquids away from the unit.
Small objects accidentally falling through the ventilation slots into th\
e 
cabinet or spillage into the cabinet may result in fire, electric shock,\
 or 
equipment damage.
If an object or liquid falls/spills into the cabinet, unplug the unit 
immediately. Have the...

Use the enclosed power cord and connect to the standard power outlet 
of your country. 
Be sure to remain within the rated voltage of the power cord.
Not doing so may result in fire or electric shock.
Power supply:  100-120/200-240 VAC±10 %, 50/60 Hz
To disconnect the power cord, grasp the plug firmly and pull.
Tugging on the cord may damage and result in fire or electric shock.
The equipment must be connected to a grounded main outlet.
Not doing so may result in fire or electric shock.
Use the correct...

When attaching an arm stand, please refer to the user’s manual of the\
 
arm stand and install the unit securely.
Not doing so may cause the unit to become unattached, which may result i\
n 
injury or equipment damage. When the unit is dropped, please ask your 
dealer for advice. Do not continue using a damaged unit.  Using a damage\
d 
unit may result in fire or electric shock. When reattaching the tilt sta\
nd, 
please use the same screws and tighten them securely.
Do not touch a damaged LCD panel...

Do not block the ventilation slots on the cabinet.
*   Do not place any objects on the ventilation slots.
*   Do not install the unit in a closed space.
*   Do not use the unit laid down or upside down.
Blocking the ventilation slots prevents proper airflow and may result in\
 
fire, electric shock, or equipment damage.
Do not touch the plug with wet hands.
Doing so may result in electrical shock.
Use an easily accessible power outlet.
This will ensure that you can disconnect the power quickly in case...

The LCD panel is manufactured using high-precision technology. 
However, note that the appearance of any missing pixels or lit pixels do\
es 
not indicate damage to the LCD monitor.
Percentage of effective pixels:99.9994%or higher.
The backlight of the LCD panel has a fixed life span. When the screen 
becomes dark or begins to flicker, please contact your dealer.
Do not press on the panel or edge of the frame strongly, as this may res\
ult 
in damage to the screen. There will be prints left on the...