Eizo Coloredge Cg211 Users Manual

7.Horizontal bars of 
distortion appear.[ ]Decrease the horizontal bars using the 
<
Phase>. 
8. Letters and lines appear 
blurred.[ ]Adjust the blurred lines using .
9. Distortion appears like the 
figure below.[ ]This happends when both composite (X-OR) 
input signal and separate vertical 
synchronizing signal are input. Please select 
one of the two.
10. The screen is too bright 
or too dark.[ ]Adjust the  (The backlight of 
the LCD monitor has a fixed life span. When 
the screen becomes dark or...

15.The  cannot 
be selected.[ ] is disabled when the screen is 
displayed in the 1600 x 1200.
[ ]  is disabled when Normal is 
selected in the  menu.
[ ] The image size is doubled both in 
horizontally and vertically to (i.e. 1600 x 
1200 enlarged from 800 x 600) provide clear 
focus which does not require this function.
16. The Main menu of 
ScreenManager does not 
operate.[ ]The adjustment lock is probably on. To 
unlock: switch the LCD monitor off. Then, 
while pressing the Autadjustment button...

Periodic cleaning is recommended to keep the monitor looking new and to \
prolong its 
operation lifetime.
 
*Never use thinner, benzene, alcohol (ethanol, methanol, or isopropyl al\
cohol), 
abrasive cleaners, or other strong solvents, as these may cause damage t\
o the 
cabinet or LCD panel.
 
Cabinet
To remove stains, wipe the cabinet with a soft, lightly moistened cloth \
using a mild 
detergent. Do not spray wax or cleaner directly into the cabinet. (For \
details, refer to 
the manual of the PC.)...

LCD Panel54 cm (21.3 inch), TFT color LCD panel with Anti-Glare Hard 
Coating
Viewing Angle: H: 170°, V: 170° (at contrast ratio 1:5)
Response Time: approx.30 ms
Dot Pitch 0.270 mm 
Horizontal Scan 
Frequency Analog: 24 - 100 kHz (Automatic)
Digital: 31 - 100 kHz
Vertical Scan 
Frequency Analog: 49 - 86 Hz (Automatic)
(1600 x 1200: 49 - 76 Hz)
Digital: 59 Hz - 61Hz, (VGA Text : 69 - 71 Hz)
Resolution  1600 dots x 1200 lines
Dot Clock (Max.)  Analog: 202.5 MHz, Digital: 162 MHz
Display Colors 16 million...

Weight10.2 kg (22.5 lbs.)
Weight 
(without stand) 7.0 kg (15.4 lbs.)
Weight 
(with hood) 10.8 kg (24 lbs.)
Temperature  Operating: 0 °C - 35 °C (32 °F - 95 ° F)
Storage: -20 °C - 60 °C (-4 °F - 140 ° F)
Humidity 30% to 80% R.H. Non-condensing
USB standard USB Specification Revision 2.0
USB ports Upstream port x 1, Downstream port x 2 
Default settings
Analog inputDigital input
Brightness 55%55%
Smoothing 3
Temperature 5,000K
FineContrast Mode Custom
PowerManager VESA DPMSDVI DMPM
Screen Size Full...

Beeper settings
Short beepScreenManager item selected. 
ScreenManager parameter adjusted to minimum or maximum 
limit. 
Input Signal Selection button pressed.
Long beep Auto Adjustment button pressed. 
ScreenManager data-save executed.
4 short beeps Monitor not connected correctly. 
PC turned off. 
Monitor received unsupported signal frequency.
2 short beeps 
every 15 sec. Monitor is in the advance notice mode of the Off Timer. The 
power will be off within fifteen minutes.
Dimensions
Unit mm (inches)
 
 

Pin Assignment
DVI-I Connector
Pin No. Signal Pin 
No. Signal Pin 
No. Signal
1 TMDS Data 2- 11TMDS Data 
1/3 Shield 21
NC
2 TMDS Data 2+ 12NC 22TMDS Clock 
Shield
3 TMDS Data 
2/4 Shield 13
NC 23TMDS Clock+
4 NC* 14+5V Power 24TMDS Clock-
5 NC 15Ground 
(return for 
+5V, Hsync  and Vsync)  C1
Analog Red
6 DDC Clock 
(SCL) 16Hot Plug 
Detect C2
Analog Green
7 DDC Data 
(SDA) 17
TMDS Data0- C3Analog Blue
8 Analog 
Vertical Sync 18
TMDS Data0+ C4Analog Horizontal 
Sync
9 TMDS Data1- 19TMDS 
Data0/5 Shield...

Afterimage
The Afterimage is particular to LCD monitors when the monitor screen is \
left on for a 
long period without use. The Afterimage can be removed gradually by ch\
anging the 
displayed image.
 
Clock
With the analog input signal display, the analog signal is converted to \
a digital signal 
by the LCD circuitry. To convert the signal correctly, the LCD monitor n\
eeds to 
produce the same number clock pulse as the dot clock of the graphics sys\
tem. When 
the clock pulse is not correctly set,...

DVI (Digital Visual Interface)
A digital flat panel interface. DVI can transmit digital data from the P\
C directly 
without loss with the signal transition method TMDS.
There are two kinds of DVI connectors. One is DVI-D connector for digita\
l signal 
input only. The other is DVI-I connector for both digital and analog sig\
nal inputs.
 
DVI DMPM (DVI Digital Monitor Power Management)
The Power management system for the digital interface. The Monitor ON \
status 
(operation mode) and the Active Off...