Eizo Coloredge Cg211 Users Manual

Thank you very much for choosing an EIZO Color Monitor.
l     The exclusive use calibration software calibrates the monitor characteri\
stics 
and generate color profile.
 
l     Dual inputs compliant 
l     DVI Digital input (TMDS) compliant. 
l     ADC (Apple Display Connector) inputs compliant. 
l     [Horizontal scanning frequency] 
Analog: 24 - 100 kHz
Digital: 31 - 100 kHz
[Vertical scanning frequency]
Analog: 49 - 86 Hz (1600 x 1200: 49 - 76 Hz)
Digital: 59 - 61 Hz (VGA text: 69 - 71 Hz))...

*LCD Monitor  *Calibration software 
ColorNavigator(in the CD-ROM)
* Power Cord 
* Analog Signal Cable (FD-C16)  *ColorNavigator Quick Referenc
* Digital Signal Cable (FD-C39)  *Adjustment Certificate
* EIZO USB Cable (MD-C93) *LIMITED WARRANTY
* Setup Guide *Cleaning kit ScreenCleaner
* EIZO LCD Utility Disk (CD-ROM) *HOOD
(Top Hood/ Right Hood / Left Hood)
* Users Manual (in the CD-ROM) 
 
* Please retain the packing materials for future transference.
* The ActiveRotationII Utility (for Windows) is...

(1)ScreenManager®
(2)Main Power Switch
(3) Input Signal Selection Button
(4) Auto Adjustment Button
(5) Enter Button
(6) Control Buttons (Up, Down, Left, Right)
*1
(7)Power Button
(8) Power Indicator
*2
Blue Operation
Flashing blue
(2 times for each) Notify that the monitor needs to be recalibrated in CAL 
mode.
Yellow Power saving
Flashing yellow 
slowly Power is off (Main power is on)
Off Power off
 
*1Directly pressing the left button or the right button allows you to sele\
ct a 
FineContrast mode....

(9)Height Adjustable Stand (Detachable)*3
(10)
Security Lock Slot*4
(11)DVI-I Input Connector x 2 (SIGNAL 1 / SIGNAL 2)
(12) USB Port (1 Upstream)
(13) USB Port (2 Downstreams)
(14) Power Connector
 
*3The LCD monitor has the capability of the Portrait/Landscape display. (\
The 
panel pivots in the clockwise direction 90°.) The LCD monitor can be\
 used with 
an optional arm stand by removing the stand. (see 
2-6. How to remove the Tilt 
Stand).
*4 Allows for connection of a security cable. This lock...

Before connecting your monitor to the PC, change the display screen sett\
ings 
(
resolution and frequency) in accordance with the APPENDIX charts.
 
*When your computer supports VESA DDC, the suitable resolution and the 
refresh rate are set by just plugging your monitor into the computer wit\
hout any 
manual settings. 
 
*Be sure that the power switches of both the PC and the monitor are OFF.
 
1.Plug the signal cable into the connector at the rear of the monitor  and the other end of the cable into...

Signal CableConnector on PC PC
Signal Cable (FD-C16 
enclosed)
Video Output 
Connector / D-Sub 
mini 15 pin
Input Connector 
(monitor) / DVI Standard graphics card 
Macintosh G3 (Blue & 
White) /Power Mac G4 (VGA)
Signal Cable (FD-C16 
enclosed) +Adapter*
Video Output 
Connector / D-Sub 15 
pin
Input Connector 
(monitor) / DVI Macintosh 
 *Macintosh Adapter (Optional) 
 
Digital Input
Signal Cable Connector on PC PC
Signal Cable (FD-C39 
enclosed)
Video Output 
Connector / DVI
Input Connector 
(monitor)...

*The cables are recommended to lead with slight sag for the smooth motion\
 of the 
stand and the Portrait/Landscape display.
 
4.Plug the other end of the power cord into a power outlet.
The monitor’s power indicator will flash yellow slowly.
WARNING
Use the enclosed power cord and connect to the standard 
power outlet of your country.
Be sure to remain within the rated voltage of the power cord.
Not doing so may result in fire or electric shock.
 
The equipment must be connected to a grounded main...

5.Turn on the monitors power button and then switch on the PCs power.
The monitors power indicator will light up (blue).
If an image does not appear, refer to the 
7. TROUBLESHOOTING for advice.
Whenever finished, turn off the PC and the monitor.
* When turning on the monitor, the kind of the input signal (Signal1 or 2\
/Analog 
or Digital) is displayed for a few seconds on the right top corner of t\
he screen.
* Adjust brightness of the screen depending on the brightness of your envi\
ronment.
* Be...

Signal CableConnector on PC PC
Signal Cable (FD-C39 
enclosed) +ADC-DVI 
display adapter 
(commercially available)
 
Video Output 
Connector / ADC
Input Connector 
(monitor) / DVI Power Mac G4 / G5(ADC)
*
ADC-DVI display adapter is required if the monitor connects to Power Mac\
 G4 / 
G5. The adapter is commercially available.
 
2.Plug the power cord into the power connector on the rear of the  monitor. 
 
3.Lead the power cord and signal cable into the cable holder at rear  of the monitor.
* The cables...

4.Plug the other end of the power cord into a power outlet.
The monitors power indicator will flash yellow slowly.
 
WARNING
Use the enclosed power cord and connect to the standard 
power outlet of your country.
Be sure to remain within the rated voltage of the power cord.
Not doing so may result in fire or electric shock.
 
The equipment must be connected to a grounded main outlet.
Not doing so may result in fire or electric shock. 
 
5.Press the power button while pressing the Input Signal Selection...